.45 Auto Rim cases are shipping

[Dale53]

I just got a phone call from Starline Brass. I have had .45 Auto Rim cases ordered since January. They are now shipping. Others who ordered when I did should also be getting theirs.

If you are in the market, now might be a good time to order. They only run these a time or two per year. Get 'em while they are HOT!

625's FOREVER!

Dale53

 

[Rodentman]

I just got an email that mine are due here tomorrow. Ordered 500, which should be enough for me for quite awhile. I also have 250 RP but I heard they were "thin." I'll check out the difference if any when I get the Starline. I've always had good luck with them. Have a lot of their 10mm and they keep going, and going, and going.

 

[bm51]

Got mine yesterday from MidwayUSA. First time to reload autorim. Now to search for loading info.

 

[seeemmiss]

Do you guys load on a Dillon? If so does it require a different conversion kit to reload the Autp Rim stuff? Just thinking I might reload Auto Rim for one of my 25s that require oversized bullets due to large throats. That would keep everything separate. At least I think it would.

 

[moxie]

bm51,
Most load data for the AR are the same as for the ACP. You just use a different shell holder. Even the die settings are the same. You can, however, use the AR for heavier loads and these use different data, as well as needing, usually, a roll crimp.

 

[Rodentman]

Redding makes a taper crimp die for the .45 acp and also a profile (roll) crimp die for the .45 ar. Nice to have them both.

 

[sunday bill]

My Dillon 650 requires a dedicated Auto-Rim conversion kit.