5906 Barrel and New Member

[jcounter]

Hey all - new member here and first time 5906 owner.

Finally picked up a 5906 - not sure why I waited so long.

Bought one sight unseen - trusted the seller. Gun is in great shape and the serial number turned out the be my birthday! Pretty cool.

This is a wide hood barrel version - barrel appears to have been shot a bit.

I’m desperate to find a replacement barrel and cannot find a single spot that has them. Does anyone know where I can look or maybe order a custom barrel?

Also - under the grip there are some numbers engraved. Looks like handwriting and it’s not too deep. Any idea? Can post pictures as well.

 

[DirtyShirt]

MDSGunRepair, Ebay, PostRockGunParts, GunPartsCorp, HogIslandGunParts, RobertsonTradingPost, EveryGunPart

Just put a .com after any of those names.

If the barrel is shot out and you don't know the guns history then it would be good practice to replace all of the springs. At least replace the recoil spring if you're not comfortable disassembling the gun to replace the other springs.

 

[jcounter]

Thank you! I will check all those out.

I have a spring kit on back order from Wolff- very comfortable with working on the gun. Plan to do some light internal polishing as well.

Really excited to get this thing up and running.

The slide and frame are going to be bead blasted back to former glory as well

 

[stansdds]

Before replacing the barrel, test fire it with several brands of ammo and different bullet weights, you may find that the original barrel is capable of acceptable accuracy. Don't expect 1.5 inch groups at 25 yards, these are not match grade pistols, but expect groups of 4 to 6 inches at 25 yards. If it shoots tighter groups, then you got a really good 5906.

 

[jcounter]

Thank you for the tip! I appreciate it.

Hoping to have it together soon. Will still keep eyes out for a barrel.

 

[Astro14]

I’ve got several thousand rounds thought my 5906 - it still holds about 1-2” at 10 yards. Can’t tell if that’s me throwing a few or the gun, but it’s among the most accurate pistols I own.

I would clean it, replace the springs, and shoot it. The barrel may be fine.

Some wear on the hood is to be expected, and nothing to worry about. One of the big wear points for accuracy is the “ball” on the end where the barrel fits into the slide bushing.

Again, that may be fine, and the only way to know is to shoot it.

That said, if you would like a spare, I found one here:

Smith & Wesson Barrel S&W 3904, 3906, 3944, 3946, 5903, 5903SSV, 5904, 5906, 5923, 5924, 5926, 5943, 5944, 5946, 915 9mm Luger 4" Stainless Steel - Dury Guns Shop

Factory replacement parts are manufactured to the exact same specifications and tolerances and use the same manufacturing materials as the original parts.

www.durygunsshop.com

Never used these guys, so, this isn’t a recommendation, but there are still some out there.

 

[ACEd]

Thank you for the tip! I appreciate it.

Hoping to have it together soon. Will still keep eyes out for a barrel.

Midway has new barrels occasionally

 

[VASCAR2]

We had a Trooper in my Agency who was a very good shooter and his issued 439 or 5904 (don’t remember which) had poor accuracy. They traced the problem to an out of spec slide lock lever. After replacing the slide lock lever the pistol shot very accurately. The recoil spring guide rod impinges on the shat of the slide lock lever. The out of shape shaft wasn’t letting the barrel lock up correctly or consistently. My Agency had some very experienced armorers and that was the only pistol they discovered with that condition (that anyone could recall). I suspect many shooters weren’t good enough to know it was the pistol wasn’t accurate. Some guns just shoot better than others. A Friend has a fixed sight 5906 and it is a lemon compared to every other 3rd gen S&W 9 mm I’ve been around.

 

[jcounter]

Appreciate that. Mine had the wider hood. I have one lined up!