Anyone have Hornady manual, scan a page for me?

Rule3

Rule3

Silver Supporter
Joined
Feb 23, 2008
Messages
22,688
Reaction score
16,447
Location
Florida
I finally got some Hornady 9mm 124 gr HP XTP bullets but do not have the Hornady manual and my books do not list it.
I also got some Gold Dots but I have the Speer manual.

Would someone be so kind to scan the page for me? or list the powders and charges they have. I figured scanning would be easier. I'd like to come close to their factory ammo.

Thank you.
 
Register to hide this ad
Personally I would just use the 125gr FMJ data they show. Seat where it looks right(and feeds) and work up from the start load.
 
shovelwrench said:
Personally I would just use the 125gr FMJ data they show. Seat where it looks right(and feeds) and work up from the start load.
Click to expand...


I agree.Whenever changing any component,you should always reduce somewhat and work back up but I'd feel comfortable with using their data with a very similar bullet as a guideline.
 
I'm looking at my Hornady 7th Edition, and the 124-gr XTP is on the same page as their data for their 124-gr FMJ-RN. The minimum C.O.L. for the XTP is 1.060" while the FMJ-RN is 1.150".

All powder charges are identical for both bullets.

Hope that helps. If you still would like a scanned page, I'll try to get my finicky old scanner working and get a file sent to you.
 
shovelwrench said:
Personally I would just use the 125gr FMJ data they show. Seat where it looks right(and feeds) and work up from the start load.
Click to expand...

Who is "they"? Hodgdon? They have a lot of loads for the Sierra 125gr.

Its weird, I have data for the 115 and 147 XTP but nothing for the 124gr.

Yes, I can start with a 124 fmj load but I was curious as to what Hornady has for their bullet. I look through Speer, Lyman and Lee, Hodgdon and get variation in load data.
 
I didn't mention in my previous post about the 124-gr XTP Hornady data, but I'd be happy to give you Hornady's charge tables if you have some powders you intend to try. That is, if I cannot get the book to scan...
 
nitesite said:
I didn't mention in my previous post about the 124-gr XTP Hornady data, but I'd be happy to give you Hornady's charge tables if you have some powders you intend to try. That is, if I cannot get the book to scan...
Click to expand...

Thanks, or just take a picture of it.

They have any load data for HP38/W231?
Unique?
Bullesye?

Any of the Color Dots? My local shop has some so I could buy a lb if needed.
 
shovelwrench said:
Yes I was referring to Hornady's data in the previous post.

For alliant's powders why don't you check Alliant's site, and refer to Canoe The Yukons post.

Alliant Powder - Reloader's Guide
Click to expand...


Duhhhhh:o I am so used to using Hodgdons and their powder I never thought to look at the Alliant site. Guess cause I never find what I want there. In this case they do have it. Thanks!

I need a nap.:D
 
Nygma and Ridgeway,

Thank you both very much.I like the way they have 6 loads with fps for each powder. My other manuals only have start and max.
 
I just got home and checked to see how this thread is going. RidgewayCOs scan of the Hornady 6th is unchanged in their 7th. No new powders added, none deleted, and the charge weights are exactly the same.
 
You must log in or register to reply here.

Similar threads

M
Reloading Hornady 125 grain XTPs with Accurate #9 in 357 magnum
2
Replies
20
Views
676
Borderboss
Borderboss
L
RCBS Cast Bullet #1 manual question
2
Replies
34
Views
921
rockquarry
R
H
Reloading .455 Webley Mark II
Replies
6
Views
222
minconrevo
M
dben002
What's up with gun stores and ammo ?????
2 3
Replies
49
Views
4K
McChemist
M
C
Matching my bullets to the load data
Replies
4
Views
586
STORMINORMAN
S

Latest posts

Back
Top