APB M&P Sport

[thumbs]

I"think" there are three things different in the complaint versions.. I can be wrong here but one place I was looking had a 10 round mag(really not so bad I want one anyway) also had the bullet button and the kicker was no flash suppressor. Not sure they were all that way but these were.

Yes the problem is getting to be the rise in the price. I was told where to find one for 689 shipped to my ffl from out of state. This would put it at about 710 out the door. Like you say this is gettin expensive. Yes there are options now. No longer is the sport the deal it was for you guys. Now on the other hand around here, before the cost increase I would have had to pay about 650 locally anyway. Add the tax and I'm about the same place. Of course this is not buying on line but locally.

Has anyone changed out the bullet button and if so what was the cost?

So the answer really isn't an easy one. I guess I have to ask is the Sport still a great value at 710 otd or not?? I don't have that much exp with AR's to tell right now.

 

[Breechloader]

Here is a thread about removing a s&w bullet button,
http://smith-wessonforum.com/smith-...w-do-you-remove-m-p-15-sport-mag-release.html

Seems a s&w factory installed bullet button is not as easily removed as a normal mag release button.
I think I would prefer not to try and do it.

 

[BillyJack2012]

Oh no. The chart! LOL.

You know, the one thing I like most about this forum is that the members keep in mind the budget and intent of the OP. What you don't see here is the knee-jerk "Add a few hundred bucks and get yourself a real rifle, Colt LE6920" typical replies.

X2! I think that line must be the most over used line on a couple of forums! Sometimes I have to come back over here and read through old posts just for a sanity check! I looked at a lot but wanted a Smith. I could have gone on for months (and I did at first) and the difference was minimal between brands. I wasn't going to build my first. Just wanted something I could go home, clean and head right to the range knowing I was going to fire off 200 rounds without a single hiccup. And, that's exactly what I did.

I looked at and held RRA, DPMS, Bushmaster, the new "Bushmaster" company that starts with a W (sorry, can't think of it right now) and Colt.

At the end of the day, there are pro's and con's to all of them. I'm a bit brand loyal so I stuck with the Smith and glad I wasn't let down.

 

[crracer_712]

Bud's has the OR model for 851.00.

What do you intend to do with the rifle? With the OR, you already get a receiver level front railed gas block. Seems a few have got rid of the standard A2 front sight (I know IMO I would rather not have the fixed sight in place). Are you going to put optics on? If so, the OR might make more sense, no need to change front sight. If you change to a railed gas block, you have to add the cost of that block as well as figure in if you can change it yourself or pay someone to do it. I'd guess 50 to 60 bucks installed at a gun smith including price of gas block. Figuring they'd charge 15 or 20 bucks.

The OR has a front hand gaurd with a heat shield in it, from what I can tell, the Sport does not. Is that important to you? Both are similar style, would you leave that alone or change it?

Don't forget the advantages to the FA and dust cover. People can argue all day long about the FA, that's OK. But the dust cover, come on, it's a no brainer. You can't have cute little slogans and stuff for all to see if you don't have one.

That 851 includes shipping. Just something else to think about.

 

[cyphertext]

So the answer really isn't an easy one. I guess I have to ask is the Sport still a great value at 710 otd or not??

You are the only one that can determine if it is of "value" to you. Mine was $704 OTD ($650 + tax). I purchased from a local retailer that allowed me to inspect the firearm before I purchased. There is some perceived value in that. But the main reason I purchased it was because it was the only Sport I could find. Demand is running higher than supply. Looking back, I was probably stupid to not buy the OR package at the gun show for $40 more, but I wanted the barrel from the Sport. Plus, I was looking at another $100 at least to put sights on the OR version. So I would say that I feel that my Sport is a good value for the money spent, it is not the bargain that it once was.

 

[thumbs]

My intent is punchin paper for now. I am also tryin to plan a pdog hunt when we head west this summer. (I hope) Yes I will probably want to put some sites on it for that. I am guessing you guys know how to do that with the front sight on.
Stopped by the LGS this afternoon and saw a Bushmaster used. Don't know anything about them but what I have heard was a bit on the negative side. Anyway my point was it has a carry handle with a site attachment that attached to the hole in the handle and went forward down and up the barrel a bit with a site mounted there. Looked pretty ingenious. It also looked like it would co witness. It was a mid length with the front sight.

Cost right now is important. As usual I have to get the best bang for the buck. From reading what you guys have said the Sport should be my best choice. I will have to use the "iron" sights for a while but will have to ask you guys later about that also.

Anyway the long and the short of it, Breechloader, found one for me. It just happened to work out that they still have them. Not cheap as you guys remember but probably what I would have spent locally with tax. Less than Cabelas regular price anyway. I figure they probably don't have them either. I may call for the heck of it and see. Ok I ordered it. Should be here early next week. Now I know enough to clean the thing before shooting but is there anything special I should know about the AR before I run er a bit? Ammo etc.

Thanks to all who helped and gave me leads. I really appreciate it.

 

[SSgt M]

Not necessarily, just look it over, look down the barrel for obstruction, oil it up, send some rounds down range.
Enjoy.....

 

[TangoFoxtrot]

If anyone knows of the whereabouts of a new M&P sport could you pm me to let me know where it is? I can find them locally for 700 bucks. The price would have to be in the low 600 dollar mark to make it worth shipping.

Thanks for the help

Gary

Advanced Arms, Pittson, PA If you need more info send me a PM.

 

[BillyJack2012]

I will have to use the "iron" sights for a while but will have to ask you guys later about that also.

Congrats on your purchase! I was set on getting an optic when I picked mine up. I have a BSA red dot on my 15-22 and was convinced that was the way to go. When I got home, I cleaned my new AR and hit the range with iron sights.

I had forgotten how much fun they were and now I'm in no hurry for an optic. They work great for me at short range. I'll get a scope for longer range shooting but for now, the irons are perfect.

 

[twofocused]

Lawmens in Raleigh NC has them for 554.99 so 590otd

 

[tigerstyle724]

I order on from a place called The Exchange. I saw them on gunsamerica.com and just gave them a call to order it, paid $646 shipped and paid $25 for the transfer $671 total. This in the model that comes with the mag release, 30 round mag, and flash suppressor.

Sent from my PG06100 using Tapatalk

 

[JaPes]

I will have to use the "iron" sights for a while but will have to ask you guys later about that also.

Here's a YouTube video that illustrates how to set a mechanical zero on iron sights.

How to Zero your AR15 / M4 / M16A2 Platform: Mechanical Zero & the 25m Target - YouTube

I use this process and it works every time. The individual who put together this video did a good job.

This may not be what you want to hear, but your circumstances that preclude the use of an optic leaving you no option but to shoot with irons is, in my opinion, a good thing.

Learning to shoot well with iron sights is a skill that I believe all firearms enthusiasts need. I feel a greater sense of accomplishment & pride in being able to shoot accurately using iron sights.

Red dots can fail. Scopes can fail. Batteries exhaust their charge. Iron sights are simple, and have a low probability of failure.

When you've attained the skill to utilize iron sights well, an optic becomes an convenience, not a must-have.

You may actually discover, as I did, that you have more fun shooting irons.

 

[BillyJack2012]

You may actually discover, as I did, that you have more fun shooting irons.

This......