Boresnake

[Incredible Me]

Guys,

I have a question, today i wanted to use my new boresnake for the first time but i ran into a problem.

Is it normal that i have to pull so hard that i'm thinking i'm gonna rip it apart? I had it in for about an inch then i didnt have the guts to go further because it was so hard. I even have small ropeburn marks on my hands, that cant be good.

(oh yeah it does say 22 on the brass weight

 

[Wes Smith]

I dont own a bore snake yet but plan on getting one. You have to be carefull not to snag it on the ejector

 

[BXRandall]

spray a little oil on the cloth part. then drop the weight through the barrel. wrap the excess cord around one hand and hold rifle in the other then pull with some force. it will feel tight but that's ok, the end result is a nice clean shiney barrel. when i do it it looks like i'm drawing a bow while "sky-ing" the arrow...not a good form for archery but fine for this application. just be sure not to snag the cloth part of the boresnake on that pesky ejector thingy.

 

[Keyhole22]

spray a little oil on the cloth part. then drop the weight through the barrel. wrap the excess cord around one hand and hold rifle in the other then pull with some force. it will feel tight but that's ok, the end result is a nice clean shiney barrel. when i do it it looks like i'm drawing a bow while "sky-ing" the arrow...not a good form for archery but fine for this application. just be sure not to snag the cloth part of the boresnake on that pesky ejector thingy.

+1, a little oil, make a wrap around your hand and pull steady and firm. Feed it carefully from the breech so it doesn't snag on anything, especially the ejector.

 

[Jerry944T]

New ones require considerable force.

 

[Incredible Me]

New ones require considerable force.

ah ok.

I saw some video's on the boresnake and the ejector had been on my mind, but wow it's tight.

 

[OK Hog Shooter]

I've been using boresnakes on my shotguns for probably 5-6 years. When new the pull is tough. It'll get better; you won't break the pull cord. Ever so often I still use a rod and attachments, but the boresnake is great for a quick cleaning swab or two. I also have boresnakes for all my rifle calibers as well.

Hog

 

[mn_doggie]

Mine pulls really tight, too.

I drilled a small 1/4" hole in a piece of 1"x4" by 8" long wooden board.

I drop the weight thru the barrel, let the weight go thru hole in the board and then step on the board with my foot. That secures the one end of the boresnake.

Then I have both hands to handle the barrel (lift up) and make sure that the boresnake doesn't mess up the ejector.

 

[mkk41]

Sure ya got the right one for the caliber of yer rifle? My .22 pulls tight. Better scrubbing I suppose.

 

[Incredible Me]

Mine pulls really tight, too.

I drilled a small 1/4" hole ion a piece of 1"x4" by 8" long wooden board.

I drop the weight thru the barrel, let the weight go thru hole in the board and then step on the board with my foot.

Then I have both hands to handle the barrel and make sure that the boresnake doesn't mess up the ejector.

That sounds like yours is just as tight as mine.
I do have the right caliber, it says 22 on. The weight

 

[s&wj]

A little off topic, but I read somewhere to remove the copper brush, to avoid any damgage to the crown, any thoughts on that?

 

[CrazyFingers]

My thought is that if your crown is softer than the integrated brush in a boresnake and it's getting scratched from it, you've got bigger problems than your choice of cleaning device.

 

[A10]

Been using Boresnakes for a lot of years and yeah they can pull hard. I've had some that I had to step on the string and pull up on the weapon to get it through the first few times. It seems to loosen up after use. They work well. I always use CLP in front of the brush, then some after the brush as well. I leave the back end of the snake dry, and this seems to make things real shiney.

 

[team sidewinder]

My .22cal boresnake is tight to say the least and like others I thought I was going to break the rope trying to get it through the bore of the barrel. While I still have my boresnakes for several guns I have switched and started using the Otis cleaning kits for most all my gun maintenance. There is no real advantage with the Otis kit over a boresnake but the kit is small and easier to store in my range box or pack in the backpack when I am out of the house. The patches for the Otis are a little expensive but you can make your own out of a old t-shirt if you have a little time.

 

[lkelly]

I've yet to try my .22 Bore Snake, but have had no difficulties with my .38 and .32 snakes. They certainly are convenient, but I just use them for a quick clean and do a thorough job later.

 

[LEO918]

I've found an easy way to "pull" the bore snake. After the brass weight is through the barrel,let it drop to the floor then stand on it with one foot and then pull the gun. Slides right through and no rope burned hands.

 

[riderrick65]

bore snake assist

Mine pulls really tight, too.

I drilled a small 1/4" hole in a piece of 1"x4" by 8" long wooden board.

I drop the weight thru the barrel, let the weight go thru hole in the board and then step on the board with my foot. That secures the one end of tghe boresnake.

Then I have both hands to handle the barrel (lift up) and make sure that the boresnake doesn't mess up the ejector.

Great idea doggie, I'll have to try that myself! I have also sprayed a little Rem Oil on the cloth part to aid in pulling it through the bore.

 

[Ranger98]

I also use a piece of automotive vacuum hose to cover the ejector with to avoid getting it tangled with the bore snake..

 

[Incredible Me]

gonna try it again tonight, but i'm still kinda scared, it was stuck and i had to pull so very hard.
I'm afraid that i'm stuck with a useless gun if the rope breaks.

 

[mn_doggie]

gonna try it again tonight, but i'm still kinda scared, it was stuck and i had to pull so very hard.
I'm afraid that i'm stuck with a useless gun if the rope breaks.

It really does get easier with use.