Changing the butt stock

[Slowhanddd]

Hey guys first post on here.Not new,just registered.How do you take the butt stock off these things to put another one on?I've tried every search I could think of.Thanks,Slow

 

[wewaslim]

These what?

 

[ceg54]

pull down on the adjustment lever and slide off

 

[James7800]

If you look on the little lever that you squeeze to adjust the stock in and out there is a pin on the bottom that the little lever pulls on when squeezed. If you get some pliers and pull on that pin far enough it will allow the stock to slide all of the way off. It just takes some effort pulling the pin since the spring gets pretty stiff pulling it down that far. That's the best I can describe it using words.

 

[BeginingOfTheEnd]

All you have to do is, instead of pulling the lever up to adjust the stock, push it down, away from the butt stock. It will then slide off.

 

[Slowhanddd]

Thanks guys.I appreciate it.Slow

 

[James7800]

All you have to do is, instead of pulling the lever up to adjust the stock, push it down, away from the butt stock. It will then slide off.

Ha, yeah that works a lot easier than what I said.

 

[BeginingOfTheEnd]

Ha, yeah that works a lot easier than what I said.

LOL it took me a while to figure it out too