CORRECT BOX FOR 16-4

[lm14134]

WHAT IS THE CORRECT BOX FOR A 91 ISSUE 16-4. I KNOW THERE IS A S&W NUMBER ON THE INSIDE OF BOX. ANYONE HAVE AN IDEA WHICH NUMBER BOX IS CORRECT AND DOES THE BOX HAVE THE MADE IN AMERICA SEAL ON FRONT CORNER. I THOUGHT I SAW THAT THE 3393 ,94 NUMBER WAS CORRECT. I AM AWARE ITS THE 1 PC BOX WITH THE INSERT FOR THE TRIGGER. I JUST WAS LOOKING FOR THE CORRECT BOX FOR GUN. THANKS IN ADVANCE

 

[PMRet]

Mine came in box#3394, and it does have the "Made in America" seal on the left front corner.

 

[lm14134]

THANKS FOR THE INFO. JUST TO ADD THIS WOULD BE FOR A 4 INCH GUN. NOT SURE WHAT YOURS IS

 

[PMRet]

My 16-4 is a 4" also. The box measures 14.5 x 6 x 2, and the box and insert could easily hold a 6" barrel revolver. Probably the same box for both.

 

[lm14134]

THANKS FOR THE LOOK AT THE LABEL. AFTER WALKING THRU A BOOK STORE I HAPPENED TO SEE A LARGE HARD COVER S&W BOOK THAT HAD TONS OF INFO IN IT. IT HAD ALL THE GUNS AND EVEN TOLD BOX NUMBERS USED FOR EACH MODEL. THE 16-4 USED 3393 AND 3394 . THE 3393 BOX MUST HAVE BEEN USED AT SOME POINT FOR THE 4 INCH GUNS BECAUSE THE BOX IS ONLY 12 1/2 LONG AND A 6 INCH WOULD NEVER FIT.

 

[PMRet]

AFTER WALKING THRU A BOOK STORE I HAPPENED TO SEE A LARGE HARD COVER S&W BOOK THAT HAD TONS OF INFO IN IT. IT HAD ALL THE GUNS AND EVEN TOLD BOX NUMBERS USED FOR EACH MODEL.

That would be the Standard Catalog of Smith & Wesson, 3rd Edition. I hope you purchased a copy, it is an invaluable resource for all things S&W.