Does a 52-2 fit here?

[mwtdvm]

I have a question and wanted to post it to the group and know the 52 series is not a Sigma but is it a M&P?

Did somebody "marginalize" us 52 owners?

In the interest of expediency, I took my 52-2 to the range and shot two strings of 5. The last round in each of the groups was a FTF and was jammed up against the top of the barrel.

I had problems with these reloads earlier in that I had the WC not completely flush with the case. I re-seated these rounds flush and as stated the first 4 worked flawlessly. I wanted to make sure I had corrected the initial problem before I did the remaining 240 rounds.

For the stats fanatics, the velocity for group 1 was 849 with a sd of 5.6 and the second group was 845 with a sd of 13.4

Any ideas/opinions/prognostications are appreciated!

 

[handgunner356]

No plastic in a 52 so it should stay in the Semi-Auto section. If your problem is always on the last round in the mag, the first thing to try would be to replace the mag springs. It's a good idea to mark your mags also so you can tell if you have a certain one acting up.