Help ID this ladysmith
- Thread starter Gmartrain
- Start date
Register to hide this ad
Parts will be a challenge for that model. Let folks know what parts you need and you may get more help.
Robert
Robert
- Joined
- Jun 28, 2007
- Messages
- 27,669
- Reaction score
- 21,355
Welcome! The serial number falls into the range of a 3rd model .22 Hand Ejector.
Thanks. When looking for parts is there a certain model which may work? Looking for a side screw on right side. And screw on the barrel rod
For those parts, either a 2nd model or 3rd model will work. Unfortunately, M frame parts are hard to find. Numrich or Jack First may have a suitable screw. For the ejector rod knob, Mr. Simmons, aka ruffkat on Gunbroker may be able to make one. From what I can see, yours looks to be in pretty good condition. You may want to try looking for a parts gun as an alternative.
Good luck!
Good luck!
Last edited:
I've never needed to search for M frame parts for these but I do see them on line (E-Bay and Gunbroker) occasionally. An M frame parts gun with no frame just sold on E-Bay, so they do show up.
Side plate screws are the same for all 3 models and they are size 48 TPI - .104" diam., including the top side plate screw which has a larger cap.
The Extractor "mushroom" shaped knob looks like the other frame sizes but is smaller than all other frames; thread size is 47 TPI - .186" diam.
You can advertise in the classifieds section of this forum.
And here's my list of S&W screw makers and S&W parts sources to try:
Samuel Simmons specializes in reproduced screws and old parts
221 English Hulse Rd
Pocahontas, AR 72455
E-mail: [email protected]
Sam is ruffkat on eBay & Gunbroker
GUN GARAGE on Ebay (for screws)
http://stores.ebay.com/Gun-Garage
George Dye (at David Carroll's) for old Smith parts, sight blades, etc.
'GeorgeinSD' is George Dye---205 502-2026 in Birmingham
"elysianfield!" on Ebay, lanyard swivel $20 shipped and nicely blued. Specify for S&W
'Guns & Gun Parts' (Recommended by S&W)
(413) 732-9938
983 Westfield St
West Springfield MA 01089-3813
EMAIL: [email protected]
Guns n Parts - New and Used Guns Bought and Sold. no parts list here.
"Aonepawninc" http://stores.ebay.com/aonepawninc
has a bunch of old S&W parts for sale. I just ordered a complete hammer for my pre model 30 from them. They are very customer oriented and have very reasonable prices. 1/10/16
Dave Bennett: Parts and guns from 1900 up to 1970's.
e-Mail: [email protected]
Web Site: www.22ammobox.com
Jim Horvath: Many parts for all S&W's (large and small) from 1860 up;
can reproduce parts.
e-Mail: [email protected]
Jeff Lee: Lee's Gun Parts (an extensive supply of gun parts, including S&W)Mike who works for Lee has 45 M25 barrels.
(Open to the public on Tuesdays, Wednesdays and Thursdays).
3401 W. Pioneer, Suite 2, Irving, TX 75061
Phone: 972-790-0773
Lee's Gun Parts
Jan Matlega: Parts for Pre-WWII S&W hand-ejectors.
Mail Address: 528 Eddy Glover
New Britain, CT 06053
Phone: 860-229-6872
Poppert's Gun Parts: http://www.poppertsgunparts.com/
P.O. Box 413
Glenside, PA 19038
Tel: 215-887-2391 Fax: 215-887-5816
Email: [email protected]
Charlie Pate: Provides screws (original & reproduction) for S&W Tip-ups and Top-breaks; author of books and articles on S&W guns.
Phone: 703-533-8057
e-Mail: [email protected]
Phil Saccacio: Phone: 540-456-6405
e-Mail: [email protected]
Dave Szilagy: Manufactures parts for older S&W's.
Mail Address: 3107 Electric, Lincoln Park, MI 48146
e-Mail: [email protected]
Mike Veilleux: Guns and Gun Parts
All Parts inc. for Pre- and Post-WWII S&W's.
Phone: 413-732-9938
e-Mail: [email protected]
Web Site: www.gunsnparts.com
S&W Parts; antique and new
[email protected]
Ph: 352 394-7412
"Schludershots"
https://www.schludershots.com/gun-parts-by-model/s-w-gun-parts.html
Side plate screws are the same for all 3 models and they are size 48 TPI - .104" diam., including the top side plate screw which has a larger cap.
The Extractor "mushroom" shaped knob looks like the other frame sizes but is smaller than all other frames; thread size is 47 TPI - .186" diam.
You can advertise in the classifieds section of this forum.
And here's my list of S&W screw makers and S&W parts sources to try:
Samuel Simmons specializes in reproduced screws and old parts
221 English Hulse Rd
Pocahontas, AR 72455
E-mail: [email protected]
Sam is ruffkat on eBay & Gunbroker
GUN GARAGE on Ebay (for screws)
http://stores.ebay.com/Gun-Garage
George Dye (at David Carroll's) for old Smith parts, sight blades, etc.
'GeorgeinSD' is George Dye---205 502-2026 in Birmingham
"elysianfield!" on Ebay, lanyard swivel $20 shipped and nicely blued. Specify for S&W
'Guns & Gun Parts' (Recommended by S&W)
(413) 732-9938
983 Westfield St
West Springfield MA 01089-3813
EMAIL: [email protected]
Guns n Parts - New and Used Guns Bought and Sold. no parts list here.
"Aonepawninc" http://stores.ebay.com/aonepawninc
has a bunch of old S&W parts for sale. I just ordered a complete hammer for my pre model 30 from them. They are very customer oriented and have very reasonable prices. 1/10/16
Dave Bennett: Parts and guns from 1900 up to 1970's.
e-Mail: [email protected]
Web Site: www.22ammobox.com
Jim Horvath: Many parts for all S&W's (large and small) from 1860 up;
can reproduce parts.
e-Mail: [email protected]
Jeff Lee: Lee's Gun Parts (an extensive supply of gun parts, including S&W)Mike who works for Lee has 45 M25 barrels.
(Open to the public on Tuesdays, Wednesdays and Thursdays).
3401 W. Pioneer, Suite 2, Irving, TX 75061
Phone: 972-790-0773
Lee's Gun Parts
Jan Matlega: Parts for Pre-WWII S&W hand-ejectors.
Mail Address: 528 Eddy Glover
New Britain, CT 06053
Phone: 860-229-6872
Poppert's Gun Parts: http://www.poppertsgunparts.com/
P.O. Box 413
Glenside, PA 19038
Tel: 215-887-2391 Fax: 215-887-5816
Email: [email protected]
Charlie Pate: Provides screws (original & reproduction) for S&W Tip-ups and Top-breaks; author of books and articles on S&W guns.
Phone: 703-533-8057
e-Mail: [email protected]
Phil Saccacio: Phone: 540-456-6405
e-Mail: [email protected]
Dave Szilagy: Manufactures parts for older S&W's.
Mail Address: 3107 Electric, Lincoln Park, MI 48146
e-Mail: [email protected]
Mike Veilleux: Guns and Gun Parts
All Parts inc. for Pre- and Post-WWII S&W's.
Phone: 413-732-9938
e-Mail: [email protected]
Web Site: www.gunsnparts.com
S&W Parts; antique and new
[email protected]
Ph: 352 394-7412
"Schludershots"
https://www.schludershots.com/gun-parts-by-model/s-w-gun-parts.html
Thank you very much!!!
Just an update: George Dye has his own place. He can be reached at [email protected]
