Help with ID on this, appears to be unfired...no paperwork with it, 27877 Ser# barrel 3 3/8" 22LR
- Thread starter Zenmor
- Start date
Register to hide this ad
Jim Watson
Member
.22-32 Kit Gun.
The real serial number is on the butt.
The real serial number is on the butt.
I think your gun is the same one I have. Model 1955 .22/32 Airweight Kit Gun.
Mine is #6211 and shipped July 8, 1955.
Mine is #6211 and shipped July 8, 1955.
Last edited:
Zenmor's revolver is not an Airweight. It is a .22/32 Kit Gun, Model of 1953. Once he supplies the serial number, we'll know more about the period of shipment. It is no later than about 1958, since it is not model marked.
I was basing it on the barrel length. Model of 1953 had a 4-inch barrel. Model of 1955 had 3 1/2-inch barrel. Looks like the shorter barrel to me.
Good chance it shipped in 1957, keeping mind that they did not ship in serial order.
Jim Carter (Hondo44) might be able to pin it down more precisely.
25619 on your gun is what we call an assembly number. The same number should be on the frame, on the yoke and behind the side plate. It was to keep the parts together during the manufacturing process. I think the P above the assembly number and the 3 below the assembly number are what we call fitters marks. Think most guns have them and they don't have a meaning that I know of.
Here is the best picture I can get of the same area on my gun. 8257 is the assembly number. I have a not well struck C where you have a P. Below the assembly number I have a 7 and an even smaller 3. Think these are all fitters marks.
Here is the best picture I can get of the same area on my gun. 8257 is the assembly number. I have a not well struck C where you have a P. Below the assembly number I have a 7 and an even smaller 3. Think these are all fitters marks.
They obviously didn't know what they had so hopefully you got it for the "I don't know what I have" price.
Jim Watson
Member
I say those are stamps applied by men long dead for records long lost.
Last edited:
Nice Kit Gun, but something not quite right about that gun. It has almost certainly been fired due to the pronounced turn line. Have you checked the serial number stamped inside the right stock as it appears they do not fit quite right as shown below. Also, is the blue turning to brown undertones for some reason?
Standard Catalog of Smith & Wesson 5th Edition says Excellent gun $1400. That would be for a Model 1953 or the Model 1955 Airweight.
The way to tell which gun you have. The Model 1953 has a cylinder length of 1.25" and weighs 22 1/2 ounces. The Model 1955 Airweight has a cylinder length of 1.44" and weighs 14 1/4 ounces. The reason for the difference in cylinder length is that the Model 1953 is an I frame and the Model 1955 is a J frame.
The way to tell which gun you have. The Model 1953 has a cylinder length of 1.25" and weighs 22 1/2 ounces. The Model 1955 Airweight has a cylinder length of 1.44" and weighs 14 1/4 ounces. The reason for the difference in cylinder length is that the Model 1953 is an I frame and the Model 1955 is a J frame.
millerj7
Member
Kind of a side comment faintly connected...Had a similar revolver in .22 RF with 3.5" barrel. Very light, marked "Mod.43" and carried the S/N 25900. Handled nicely and was carried many miles in the Arizona desert. It had the old flat latch for the cylinder release. Unfortunately, it got away when I was offered way too much money when it was needed.
To me something doesn't look right with the finish? But I am not expert and hard to tell without actually seeing it.
hkcavalier
US Veteran
Looks like that "gloss black" anodizing vs. "blue/gray black" of classic bluing. Proportions seem right for a J frame as well.
Old pre-ZIP code Tyler T-Grip is nice. Never seen a S&W with a Tyler that hadn't been shot much!
Old pre-ZIP code Tyler T-Grip is nice. Never seen a S&W with a Tyler that hadn't been shot much!
