Help

[cyphertext]

Ok, so now you know you need a .5" riser that is 2.5" long. Let's take a look at the CTD page posted earlier. You don't have to buy it from there, but you can at least find something that will meet your need.

 

[cyphertext]

You could go with something like this...

TRUGLO 2 Piece Picatinny Mount Riser .5" Riser Black TG8972B

Not sure if it would leave a gap or not... functionally wouldn't matter, aesthetically might be a different story.

 

[cyphertext]

I would probably go with these two. Butt them up together and call it good.

UTG Low-Profile Super Compact Riser Mount, 0.5" High,2 Slots

http://www.cheaperthandirt.com/product/16-MNT-RS05S3

Way less than the Truglo brand I previously posted.

Edited to post different URLs... oops

 

[Pinger5.56]

Thank all, I found 1 that is .5" and is 3.25" long and another 1" long one was also 3.5" long I also seen those 2pcs ones also. They are all on Amazon

 

[78Staff]

This was during the time where I felt I had to put everything and the kitchen sink on a rifle. The high cantilever mount was so that I could push the optic forward on the limited flat top rail space and accommodate a rear flip up sight and eventually a PA 3X magnifier on a swing to side mount. I turned a nice light rifle into a top-heavy pig.


Type equipped on a rifle I shot a few times:

Primary Arms Micro Dot With QD riser combo.

For $99 + Shipping, the Microdot is the one I would choose.

Just ordered one of these tonight, actually Have a Aimpoint Micro on my MP and going to throw the PA on my 15-22 to keep the optics somewhat similar.

 

[jfp357]

Bushnell - TRS 1x 25mm

I got 3 of these. 15-22, 15-5.56 and soon to be on my Yankee Hill model 57

 

[ChattanoogaPhil]

Forget the one inch riser. Too high. You won't be able to use your irons.

 

[WU_Who]

.5" riser will give you an absolute co-witness. Look into UTG risers. I went with two 3 slot .5" risers. A little bit longer then the sight by a couple slots.

 

[Pinger5.56]

Thanks I think that is the one I found on Amazon the UTG riser there where 2 in a pack and that would work got them on the wish list have to wait and save up some more cash, spent to much adding new tactical items to my shotgun.

 

[Pinger5.56]

well got it

Got a Acid Tactical .5" riser for a great price. here is a pic of the rifle with the Truglo red/green dot site on it with the mount for Absolute co-witness. Just need to get to the range.