KnotRight
Member
Green to Red...........I thought that you were talking about going from Port to Starboard. Both of my boats have green and red lights.
So does my reloading equipment.
So does my reloading equipment.
I am forming a GREEN and RED Club Sign up here.
- Thread starter Rule3
- Start date
Boogsawaste
Member
Let's see, red lee classic turret and lee die sets. Rcbs hand primer, 10-10, x2 uniflows, scale calibration set, case lube pad. Hornady powder cop and primer pocket swager. Oh even my thumblers tumbler is red. 
.
Nothing blue but I'm not against it. What I have works for me and my requirements!
Also dealt with rcbs customer service a couple times for used equipment that I bought. They replaced everything I needed, free of charge, even when I explained that I either broke it or that the item was pre owned when I got it. I tried to pay every time too but they ignored me.
. Nothing blue but I'm not against it. What I have works for me and my requirements!
Also dealt with rcbs customer service a couple times for used equipment that I bought. They replaced everything I needed, free of charge, even when I explained that I either broke it or that the item was pre owned when I got it. I tried to pay every time too but they ignored me.
m657
Member
fredj338
Member
Dillon forced the other companies to up their CS. I have never really had any issue with RCBS, Hornady or Lee & CS. Though Lee has pushed me to the limit a couple times. Never had to return/fix anything Redding/Saeco made. They all do a better job than any other industry.
sarg1c
US Veteran
Mostly every thing is red but some of my dies ,although red (Lee) did come in a green box. I do also have a green press (Lyman turrent) to go with my red Lee turrent press. Everything else is Lee
joeintexas
US Veteran
Rule, I guess you can count me in too. Green press, red and green dies, red lock and load powder drop, another green powder drop and a green inertia bullet puller. oh and an old 505 scale.
novalty
Member
Fred, I don't know how it was before Dillon entered the game, but so far my dealings with RCBS have been a lot better than what I had with Dillon. This is no way a criticism of the equipment, I own both. Just know RCBS has been in the game longer than Dillon.
The one issue I had with a Hornady item they quickly resolved it and we're very pleasant to deal with too.
OP
greenmachine
Member
We must be very careful here. Proceed, but very cautiously.
OP
ChiefStealth
US Veteran
Mostly red. Some things are green. Mostly 'cuz that's what I could find in my local store... BI (before internet). Just got a new AR-15 this week. Ordered red dies. Also got a primer pocket reamer.. orange. I have to admit that the CS for both red and green have been totally useless for me. 'Cuz I've never needed anything from either.
Magload
US Veteran
Krylon makes a nice flat blue that matches the Cool Aid you guys could paint that red and green stuff so your benches would at least look better. Don
- Joined
- Apr 4, 2006
- Messages
- 19,888
- Reaction score
- 31,912
Started out with Green. Tried Red (didn't care for it). Ended up with Smurf Blue - VERY HAPPY! Still have Green, but almost never use it these days since that Blue works so wonderfully.
snowman
Member
I have two different reds & two different greens. Let me tell you my experience.
-I bought the one red item, a press, on a Tuesday. On Wednesday a helicopter with their logo on it landed in my front yard. They had learned of my purchase from the distributor, sent two reps to my house, one a cs rep & the other a tech. They offered to help me set up the press and teach me how to use it, at no charge. Of course I accepted.
-My first green item, a scale, was off 1.3gr after I contracted a cold and sneezed on one end of the beam. They monitor every purchase and employ traveling follow-up cs reps to visit each purchaser to assist in any way necessary. My traveling rep arrived an hour after the incident and provided me with a new scale to replace the soiled one. He apologized and took me out for a steak dinner that evening.
-The second green purchase, a powder measure, had a speck of green paint .1mm in diameter on the inside of the transparent hopper at the bottom. The company had tracked the unit with the defective component to my LGS, located me, gave me a 50% rebate and sent a tech to replace the hopper. He also cleaned the bathroom fixtures while he was here.
-The other red item, a case trimmer, has been completely satisfactory after trimming around 900 cases. but I've had it for a week and haven't heard anything from the company. Do you think I should be concerned?
Andy
-I bought the one red item, a press, on a Tuesday. On Wednesday a helicopter with their logo on it landed in my front yard. They had learned of my purchase from the distributor, sent two reps to my house, one a cs rep & the other a tech. They offered to help me set up the press and teach me how to use it, at no charge. Of course I accepted.
-My first green item, a scale, was off 1.3gr after I contracted a cold and sneezed on one end of the beam. They monitor every purchase and employ traveling follow-up cs reps to visit each purchaser to assist in any way necessary. My traveling rep arrived an hour after the incident and provided me with a new scale to replace the soiled one. He apologized and took me out for a steak dinner that evening.
-The second green purchase, a powder measure, had a speck of green paint .1mm in diameter on the inside of the transparent hopper at the bottom. The company had tracked the unit with the defective component to my LGS, located me, gave me a 50% rebate and sent a tech to replace the hopper. He also cleaned the bathroom fixtures while he was here.
-The other red item, a case trimmer, has been completely satisfactory after trimming around 900 cases. but I've had it for a week and haven't heard anything from the company. Do you think I should be concerned?
Andy
Last edited:
Mostly red here since I started with the classic turret kit. But I have one set of green dies and a green collet-type bullet puller - mounted in a red hand-press I bought second hand NIB for $15.
And like so many others I first thought this was a Red Green thread rather than a green red thread...
And like so many others I first thought this was a Red Green thread rather than a green red thread...
Last edited:
geddylee10002000
Member
- Joined
- Jul 16, 2009
- Messages
- 747
- Reaction score
- 536
Started on green decades ago. Incorporated a bit of Orange. Then I drank some Blue Koolaid! Still have all of it.
Last edited:
I use those round green things in my big red thing and they work very well together.
MyDads38
Member
Count me in. Still have and use my first ever reloading press-1978 RCBS Reloader Special. Have several Lee Handloading kits (use with plastic hammer), still have an original Lee 3 hole turret, finally upgraded to the 4 hole Lee Classic Cast Turret, Lyman 450 Sizer/Lubricator and all assortment of die sets! Only color I don't have is Blue, but I just don't shoot enough to actually NEED one. Otherwise, I'd probably own some of that color too! LOL 
smokindog
Member
gwpercle
Member
I think this was one of the funniest shows to ever come across the tube. Wish I could see some re-runs...I LIKED it !
Thanks for posting this, I had no idea they had a website...I'm going to sign up and watch some reruns , gonna get a T-shirt too!
You know it's funny but all my BLUE stuff is Bair and Pacific, but I enjoy the Dillion catalog they send. Nice photo's.
Gary
Last edited:
OP
Must be a special edition.
This club accepts any make model as long as you reload and do not tell us over and over how great something is,
Kframerbluvr
Member
Put me down for red. Old Pacific 0-7 press and powder measure and Lee dies.
I have some red stuff in two shades, I got some green stuff also in two shades, some orange, and some gray stuff. More RCBS green than anything else, BUT I also got some blue stuff. It don't mater much to me what color as long as it reloads ammo. Am I OK?
4barrel
Member
Magload
US Veteran
I I recall after after a long 50 years my MEC reloader was red can I join?
Similar threads
