J-Frame Show & Tell

[elm_creek_smith]

Model 642-2 because I needed a backup gun to replace a nickel-plated Model 37ND with sights I couldn't see. I ended up swapping the Model 37ND for a 2 inch Model 12-2. I bought the Model 642-2 because I walked into a S&W factory sale at the LGS & range. All the J-Frames (438/442) were $399.99 while the 642-2s were $324.99. I said I'd take the 642-2, and the guy behind the table said, "Pick a box." Confused, I just picked up the top box. He said, "Open it." Really confused, I did and found a $100.00 off store coupon. Walked out with the 642-2 for $254 and change after taxes.

It now belongs to my granddaughter of the tiny hands who is a USMC corporal.

The 2 inch Model 12-2 dates to 1963, became my backup, & is my current EDC.


Sent from my XT1710-02 using Tapatalk

 

[krsmith58]

J FRAME

let's see . model 60 , 642 and 34 . but why . i have to blame it all on all of you and your fancy revolvers . last year i was just a normal guy . well ok so iv'e never been normal . hey , you must have been talking to my wife's family . such fun!! kenny

 

[CH4]

Although J frames aren't the focus of my attention, I think everyone should have at least one. The only J frame currently on my short list is a 2" 34/63.

 

[model17]

J frame love!

They do what they are supposed to do, and go bang every time!

Model
38 Bodyguard
36 Chiefs Spec.
43
34
642

 

[OLDSTER]

My only J-frame is this mint "Model of 1953 Early Chiefs Special" with India Sambar Stag grips. One of my most cherished revolvers. Have to admit she's a safe queen.

 

[HamHands]

A baby chiefs and a early chiefs special

Wife[s model 60

My Ladysmith,

I really like these Zeta6 speedloaders for my J-frames too.
I carry the speedloader strips in my pocket and these in my vehicles.

@Rubi Ranch...

I've gotta get a half dozen of those "Zeta6 Speed Loaders" you posted. That is such an ingenious design... so utilitarian and simple with no knobs to twist or pull. They may even be almost as quick for a reload as a True Moon Clip!

 

[KalamazooKid]

I'm a big fan of stainless for a "working" gun. This early (67) model 60 is a favorite checking a lot of boxes for me.

 

[PALADIN85020]

I love the little J-frames and have accumulated a number that I've fancied and acquired over many years. Here's a thread that describes them in some detail:

smith-wessonforum.com/s-w-revolvers-1980-present/158820-wonderful-world-j-frames.html

John

 

[REP]

A lot of great guns here. It just makes the fever worsen.
The only pictures I have on my 442 is that of showing it's front sight change.
http://smith-wessonforum.com/attachment.php?attachmentid=449502&stc=1&d=1589117452
I did not get to own the 351PD to long and it some how became my sons but I replaced it with with 351C both are great pocket guns to me.
http://smith-wessonforum.com/attachment.php?attachmentid=449504&stc=1&d=1589117835
http://smith-wessonforum.com/attachment.php?attachmentid=449506&stc=1&d=1589118036

 

[OIF2]

Why? It works.
Bob

 

[OIF2]

Safe Queens are cool, too. This one has the box, paperwork and tools. Maybe I'll shoot it some day.
Bob

 

[LEO918]

Here's a pair of Terriers.....

 

[rubiranch]

@Rubi Ranch...

I've gotta get a half dozen of those "Zeta6 Speed Loaders" you posted. That is such an ingenious design... so utilitarian and simple with no knobs to twist or pull. They may even be almost as quick for a reload as a True Moon Clip!

And they are VERY affordable to boot.

 

[RayRay7]

I was about 10 when i asked my dad if I could get (my first) ever gun magazine; a mid 1990s issue of Guns Magazine featuring the Smith & Wesson 640 in .357 mag (I have the issue stored away somewhere but can't remember the exact date.)

That, along with the Kahr K9 (new at the time) became the two handguns I wanted most and hoped to have one day.

It wasn't until 2019 that I would pick up my first J frame.

It was a used 642pc in the consignment rack at my favorite shop. I used it for my first IDPA Match last year; wasn't fast by any means but it sure was a blast. The five shots was limiting but was nonetheless absolute fun.

A couple of months ago I was in the shop just to say hi and see what they had mid-pandemic, and they had a consigned 340 on the back counter.

I've yet to shoot it but am already wondering if I should get some Culina boot grips for it...and maybe some rubber ones too.

Still have no early .357 640 though. Same for a K9...

One day.

 

[Torakan]

This is about 1/2 of my J frame collection.

 

[LPD256]

I got my first J frame 36 to carry in my cowboy boot during an undercover assignment. I got my most recent one from a friend who had bought it from another friend. It's blue and I thought it would be fun to have, blue, nickel, and stainless. Two are pictured here.

 

[hittman77]

Missouri State Highway Patrol (MSHP) 50th Anniversary Commemorative, 1981. MSHP logo on this side.

On this side stamped by the factory (I think) is MSHP 858 to indicate badge number. This gun was carried and came to me just as you see it.

Got it because I like J frames and snubbies and especially because I have a relative working for the MSHP.

 

[pennzy]

My local gun shop had it in stock about 35 years ago and I love pocket guns.

 

[two-bit cowboy]

Nostalgia?

Yeah, that's part of it.

Mamo, my Mom's Mom, taught me to shoot her 2" Model 31 Regulation Police when I was seven years old in 1959. Granted, it was an I-frame, and I have one just like it from 1958.

That's what started me on Chiefs. I'm a retired CMSgt (Chief Master Sergeant) and I call my affliction OCD (Old Chiefs Disease). A dozen Baby Chiefs, six from my 1952 birth year, lead off my hoard of more than 40 Chiefs, spanning serial number 72 from 1951 through an ANIB Model 36-9 from 1998.

My latest two are a Model of 1953 Airweight and a 1989 Model 60-3.

 

[MJK-MOD-547]

S&W 650 and 651 .22 MRF
Bought them new in 82 and they shoot very accurately too!

 

[haywood]

J-Frames are my favorite. At present I have a bobbed 37, Two 442s (carried daily) and a 3" 36 that is close to perfect. This picture doesn't show how nice the blueing is.

 

[681ismyfavorite]

I have several lurking in the safe or on my belt. Normal carry piece is a 649 which I enjoy having along with me because it just doesn't get in the way.
Also have a 49 which pretty much stays in the box these days.

Here they are together....

And then there is the Chiefs Special (Baby) from 1951 that joined the family....

View attachment 449413

View attachment 449414

View attachment 449415

whats that middle tool in the box?

 

[Moo Moo]

Here's my two 36's.

 

[505Gibbs]

My only two J frames are variations of the 632-1. The standard black finish and the satin finish which initially was a Sports South exclusive. The grips came from Karl Nill.

 

[F75gunslinger]

My 642 I wanted something for warm weather carry...

 

[Jimmyjones]

They fit me. Old pics, with my OCD I'm sure I have at least one more of every model

 

[LEO918]

Here's a Model 60 and a Model 63...

 

[HOUSTON RICK]

I have one of those:

 

[BeAnalog]

This is my first snubby. A Smith and Wesson 637 .38 Special, rated +p, SA/DA revolver for my EDC. First time at the range with it I shot 300 rounds through it. I did pretty good once I got used to it. The target picture is from the very first shots ever fired from this snubby. The other gun the bottom of the last picture is an old Iver Johnson hammerless circa 1916.

Sent from my moto g(7) power using Tapatalk

 

[photoman]