K38 master piece 1955

[platoman]

Hi, I´m desperatly looking for a cylinder stop pin, screw and spring lost at the range last time shooting. Been searching all over swedish forums and dealers without succes. Can anyone here help a swedish brother in arms? Where can I buy those parts?

 

[CALREB]

Unless the older guns are made different, I can picture a cyinder stop spring ,but not pin or screw, unless you mean the stud,can you describe what happened or the parts involved, thanks, Bob

 

[tennexplorer]

You should be able to get them from e-gunparts.com. Also known as Numrich Arms.

What happened is the screw backed out, then the pin and the spring fell out, right? The pin is really more like a rod.

 

[platoman]

Unless the older guns are made different, I can picture a cyinder stop spring ,but not pin or screw, unless you mean the stud,can you describe what happened or the parts involved, thanks, Bob

the parts I mean is the set of screw, spring and pin located in the hole in front of and just abowe the trigger guard. I guess the screw unscrewed it self and the whole set was ejected from the hole during firing the last shot cousing the cilinder now to rotate without locking in position.

This setup of a screw, spring and pin I saw in a picture of a similar revolver.

 

[platoman]

You should be able to get them from e-gunparts.com. Also known as Numrich Arms.

What happened is the screw backed out, then the pin and the spring fell out, right? The pin is really more like a rod.

the set just fell out during shooting and I noticed it to late to find it in the gravel...

 

[CALREB]

OK,I got it now, for a 5 screw,duh, too much back medicine, I will check in my stuff and see if I can come up with anything,Bob

 

[CALREB]

Platoman,I found a bunch of the parts you need, if another forum member can tell us what matches your year/model of rev. I believe the screws are the same but the springs and rods are different some are plunger type some are larger than others etc, if another forum member can show me what to send you , I will be glad to karma you what you need. Bob

 

[Alk8944]

Platoman,I found a bunch of the parts you need, if another forum member can tell us what matches your year/model of rev. I believe the screws are the same but the springs and rods are different some are plunger type some are larger than others etc, if another forum member can show me what to send you , I will be glad to karma you what you need. Bob

CALREB,

Don't want to step on your generosity or Platoman's need, but he is apparently in Sweden. There are federal laws prohibiting the export of firearms parts without the proper export license. Probably no one would ever know, but if your package is x-rayed and someone recognizes them for what they are it could cause you a lot of grief you don't want.

 

[platoman]

CALREB,

Don't want to step on your generosity or Platoman's need, but he is apparently in Sweden. There are federal laws prohibiting the export of firearms parts without the proper export license. Probably no one would ever know, but if your package is x-rayed and someone recognizes them for what they are it could cause you a lot of grief you don't want.

[lang=sv]This parts are not under restrictions of any kind and need no export license according to US-ambassy in Stockholm. It´s different with cylinders, barrels and other vital parts of a gun. But thanks for your consideration as the last thing I want is to bring trubbel....

 

[platoman]

Platoman,I found a bunch of the parts you need, if another forum member can tell us what matches your year/model of rev. I believe the screws are the same but the springs and rods are different some are plunger type some are larger than others etc, if another forum member can show me what to send you , I will be glad to karma you what you need. Bob

Calreb,

Thanks! My rev is from 1955 and a Master Piece model cal 38 spec.

If we can find out what screw, spring and rod I need, I would be most greatful to buy sutch set from you.

I have checked the export licens-situation and no licens is needed.

 

[CALREB]

Platoman ,no problem, Alk isnt far from being right,especially in my state .I know barrels,sears,that stuff I would be a little wary, even non gun parts,vest,gas mask and such I would probably need to include my end user certificate,HA (saw that on TV).Anyway the stuff Im sending you is from a 1955 singer sewing machine anyway so doesnt apply. PM me you mailing info for future ref, Thanks Bob, also Thanks Alk we gotta watch out for each other I DO appreciate it.

 

[platoman]

Done...

 

[platoman]

[lang=sv]and...? [/lang]