Looking for some 45 ACP loads...

A

acl864

Member
Joined
Sep 20, 2008
Messages
583
Reaction score
38
Location
Central NC
I'm helping a good friend of mine get started reloading 45 ACP. I'm casting him some 230 gr. TL LRN from a Lee mold using straight wheel weight alloy, letting them air cool then using 45/45/10 tumble lube. He's got a Sig P220 and is looking for some practice/target loads. He'll be using my powder supply to develop the loads before buying his own supplies so the powder selection is pretty diverse. I have Clays, Bullseye, HP-38, SR-7625, Power Pistol, SR-4756, Unique, Universal, IMR-4227 and 2400 on the shelf for handgun loads. I've got a couple of manuals and of course online data but if you guys have any pet loads you'd be willing to share I'd appreciate it.
 
Register to hide this ad
My favorite .45 Auto round is made with a 230gr LRN bullet over 5.5gr W231/HP-38. It's almost all I ever shoot now in my 1911. When I load a 230gr FMJ bullet I use the same charge and powder.
 
I use HP-38, load varies from 4.6 to 5.3, with 5.0 being the usual. This with 230 grn LRNs. My 4566 has never coughed the slightest with any of these. My Glock 30, on the other hand...
 
I use 5.0 grains of Bullseye with either a 230 gr JRN, 200 gr JRN, 200 gr LSWC or 185 gr JHP. I have used this with the LSWC for over 20 years. Before that I loaded 4.8 grains of Bullseye with the 200 gr LSWC. In both of my 70 series Government Model Colts, the 4.8 grain load was a tad more accurate for Bullseye sooting, but was marginal on making Major for IPSC. Since the PF was dropped to 165 for IPSC, I have not gone back to the 4.8 load. I just haven't bothered to do so.
 
That would be this bullet (boolit) right here:

PHOT0032-2.jpg


4.0-4.7gr of Bullseye. Cat's meow!

4.0gr Clays OK.

5.6gr SR4756 Ehh. Nothing special written about this load.

5.1gr HP-38 My notes say "accurate"

My favorite for the 45ACP and a 230gr bullet, plated or lead is 5.3gr AA#2. Dirty, smoky, but "muy" accurate!

Hope this helps, Andy!
 
Lots of great info!!! Just what I was looking for. Thanks everyone. I'll post a range report when I get done.

Nice batch of boolits Skip. I see you are using Xlox. I've been meaning to order some. Are you using it straight or blending it with Johnson's Paste Wax?
 
Andy,
This was the first bullet I ever cast and have since moved on. I have a Saeco #496BB that has a conventional lube groove. It is a really nice bullet (boollit)! :)

In this picture, I believe there was a mixture of 50/50 Xlox/Mineral Spirits and this was the second application. Since I bought 5 bottles of Xlox, that's what shipped in a full order, and then stopped using it, there is still enough here to do thousands of boolits! For a short time I even made my own conventional lube with it and bees wax and paraffin. That stuff really worked! Got lazy and now buy the White Label Lube 2700 Carnuba Red.

Never tried the paste wax/Xlox mix. Sounds interesting though! Anyone else use that?
 
I take Johnson's Paste Wax and cook it over low heat for about 30 minutes to flash all the solvents off. Then mix in an equal amount of Alox/Xlox and blend. I use a small amount of Mineral Spirits (about 10%) to thin it down slightly. I use it on just about everything- tumble lube or conventional lube groove designs. It's much less messy than straight Alox/Xlox and for me it just plain works better. There's alot of info about this 45/45/10 blend over at the Cast Boolits forum. A gentleman that goes by the handle of Recluse developed it. Lar's that does the White Label Lubes is in the process of developing a commercial version of it too.
 
My target load for a while has been 4.8gr bullseye under a 230gr missouri bullet LRN. very accurate and chroneod around 830fps in a 5" barrel and 760fps in a 3", duplicates standard hardball
 
+1 on 5.0 gr Bullseye with 230 gr. bullet. Approximates .45 hardball load. Has given good results with flat point lead 230 gr bullet on bowling pins/plates. 4.0 gr Bullseye with same bullet is very reliable and accurate in my 1911 and Glock 30. May be too light to function in some pistols. If so, 4.5 works,just not quite as hot as 5.0 gr.
 
3.8 gr of clays under that 230gr lead head and he'll be in lust. Light kicking, clean burning, prints POA and plenty accurate. It's all my shooting crew uses these days.
 
I agree with the 5.0 grains of W-231/HP-38. I have been using that load with a 230 gr. pill for a very long time. It is a nice target load that cycles all the .45 guns well, and it will not beat up you or the gun!


WG840
 
Well, my buddy brought his Sig 220 over yesterday. I had prepped and primed 50 cases with Federal LP primers and loaded 10 of them with 4.5 gr. Bullseye under the 230 gr tumble lube LRN bullets. The plan was to see how that load shot then make adjustments from there. It shot so good I just ended up going back in the shop and loading the other 40 cases with the same load. I'm sure at some point in time we might try some other powders or work up to the 5.0 gr. Bullseye load, but for what we wanted, 4.5 gr. worked just fine. In fact they shot so good I forgot to chrono any of them. My buddy shot some great groups with this load and was tickled with the performance and accuracy. Thanks for all the suggestions and help.
 
Another satisfied Bullseye user! :D

The only reason you wouldn't be one and still be a reloader is: You just haven't tried it yet! :D

Glad it went well for you! Now, get that friend loading for himself, Andy!
 
I'll help!

acl864 said:
Most definitely. I've got an extra press, powder measure and scale cleaned up and waiting for him to set up a reloading bench. ;)
Click to expand...

Tell you what Andy. I'll donate the calipers. They may be Harbor Freight, but that will get him started.

Let me know through a pm where to send them.

I love this part of the hobby! Gettin' someone else addicted!

:D
 
acl864 said:
Well, my buddy brought his Sig 220 over yesterday. I had prepped and primed 50 cases with Federal LP primers and loaded 10 of them with 4.5 gr. Bullseye under the 230 gr tumble lube LRN bullets. The plan was to see how that load shot then make adjustments from there. It shot so good I just ended up going back in the shop and loading the other 40 cases with the same load. I'm sure at some point in time we might try some other powders or work up to the 5.0 gr. Bullseye load, but for what we wanted, 4.5 gr. worked just fine. In fact they shot so good I forgot to chrono any of them. My buddy shot some great groups with this load and was tickled with the performance and accuracy. Thanks for all the suggestions and help.
Click to expand...

Yes he did, and was.:D


smith crazy said:
Tell you what Andy. I'll donate the calipers. They may be Harbor Freight, but that will get him started.

Let me know through a pm where to send them.

I love this part of the hobby! Gettin' someone else addicted!

:D
Click to expand...

Well thank you.
 
You must log in or register to reply here.

Similar threads

dirty gary
Universal Clays for 45 acp
2
Replies
23
Views
14K
Cdog
Cdog
Smith357
.45 acp cross reference
2
Replies
20
Views
6K
Skip Sackett
Skip Sackett
W
45 acp loads
2
Replies
30
Views
11K
ArchAngelCD
ArchAngelCD
L
Clean burning powder for .45 acp/9 mm
2 3
Replies
47
Views
24K
noonster
N
E
9mm Load data? Clays [Hodgdon] - NOT UNIVERSAL
Replies
14
Views
18K
3Gunnah
3

Latest posts

Back
Top