M&P 10mm.
- Thread starter clarkstoncz
- Start date
- Joined
- Feb 7, 2012
- Messages
- 1
- Reaction score
- 0
I'll take 2 mp 10mm if the come in 5"
10mmauto
Member
Sign me up, of course. 
I have shot my 1006 in 3-gun competition for years; yes I download wad cutters to 10MM lite specs. Accuracy was awesome but loading this 10mm with 190gr FPJ just over 1300 fps, accuracy was also awesome and recoil very manageable. I now shoot 45acp in competition, not to win but to smoothly transition through the course with A zone hits. I notice more of a snap with 10mm recoil vs a push from the 45. I'm in if M&P makes 10mm.
VaRecon
Member
JaPes
Member
When I click the sign petition button, a pop up that says "Sign on With Facebook".
Sorry, but I don't Facebook.
Elkins45
Member
I would LOVE an M&P in 10mm! Full size, preferably.
I'm in on a M&P 10mm buy.
You folks need to lay off beating down the 10mm revolvers though. I'm a big fan...would actually prefer a 4 inch 310 to an M&P 10mm, but I'll take what's produced....would take both if both are produced!
You folks need to lay off beating down the 10mm revolvers though. I'm a big fan...would actually prefer a 4 inch 310 to an M&P 10mm, but I'll take what's produced....would take both if both are produced!
Jäger1
Member
I'm in!
I'd happily snap up a duty size M&P in 10mm. Assuming it would tolerate a minimal diet of hot 10mm, it would be just fine for those of us living in bear and cougar country who could be in the city an hour later.
In fact, it leaves me wondering... a common course for those who want a 10mm but can't find what they want is to buy a base pistol similar to what they're looking for in 40 S&W and then use a finishing reamer to chamber it in 10mm.
So... I wonder if you could take an M&P in 40, ream it out to 10mm, and then find the necessary springs to adjust for 10mm loads. Hmmmmm....
I'd happily snap up a duty size M&P in 10mm. Assuming it would tolerate a minimal diet of hot 10mm, it would be just fine for those of us living in bear and cougar country who could be in the city an hour later.
In fact, it leaves me wondering... a common course for those who want a 10mm but can't find what they want is to buy a base pistol similar to what they're looking for in 40 S&W and then use a finishing reamer to chamber it in 10mm.
So... I wonder if you could take an M&P in 40, ream it out to 10mm, and then find the necessary springs to adjust for 10mm loads. Hmmmmm....
Shadow1006
Member
The problem is the magazines are too short to stuff the 1.250"/1.260" 10mm's in there from what i was told. I think I'd prefer it to be designed as a 10mm to start, knowing the full potential of the cartridge.
Jäger1
Member
Yeah, but when they won't make what you'd prefer, sometimes you take what you can get...
Roadtrash
US Veteran
It's like someone else already said get a 10mm with interchangeable barrels for 40 S&W and 357 Sig and now you have a gun for every body.
Do you think they really listen when we post on here?
Do you think they really listen when we post on here?
Shadow1006
Member
S&W announced the PC S&W M&P40 with the C.O.R.E. (Competition Optics Ready Equipment) slide mounted optics...
A nice S&W PC M&P 10mm with that ability and setup would make for some interesting additions to the mix...
A nice S&W PC M&P 10mm with that ability and setup would make for some interesting additions to the mix...
Maximumbob54
Member
- Joined
- Oct 2, 2010
- Messages
- 7,202
- Reaction score
- 1,928
I get all excited each time I see this thread bump to the top.
Then I get all sad because it's the same old no news.
I gave up on waiting for S&W to make the M&P 10mm and bought a Delta Elite to make thunder at the range.
But I would still snap up a M&P 10mm and maybe even a 10c.
Then I get all sad because it's the same old no news.
I gave up on waiting for S&W to make the M&P 10mm and bought a Delta Elite to make thunder at the range.
But I would still snap up a M&P 10mm and maybe even a 10c.
I couldnt imagine shooting a 10mm out of a polymer gun. I have never shot the glock 10mm's, but after shooting the 1066 I have for a while, I dont know how a light polymer gun would be controllable with a full house 10mm
Shadow1006
Member
Nipster, I have the Glock 29, it is very shootable even with the potent cartridges like 200gr. XTP's running 1200-1240 fps. The grip spreads out the recoil and the lower bore center keeps the muzzle flip lower back into the web of the hand. Oh BTW the S&W 3rd gens do well also but I do like to run them using extra power recoil springs...22lb for the 5" models and 21lb for the 4.25" models which are all shooters.
But pestering S&W to come out with the M&P 10mm is like pulling hen's teeth...
But pestering S&W to come out with the M&P 10mm is like pulling hen's teeth...
627 city hunter
Member
Glock is making fools out of S&W because they don't have 10mm.
Are S&W manufacturers forced to be "endowed with less"?
Are S&W manufacturers forced to be "endowed with less"?
