I have noted that if my slide is open and I try to insert a new magazine, it jams. It happens everytime. If the slide is closed there are no issues with the reload. I believe I have seen others mention this, but not seen any ways to fix this. Any input would be greatly appreciated.
M&P 22 Inserting New Mag when Slide open
- Thread starter mpolan
- Start date
Register to hide this ad
Rastoff
US Veteran
After inserting the mag, how are you operating the slide?
mkbruce
Member
If you use a little too much force inserting a magazine with the slide open, the top cartridge has a tendency to tilt up a bit causing it to jam when you release the slide.
Two potential fixes -
1. Don't slam the magazine in - light pressure is all that is needed
2. Close the feed lips of the magazine slightly with a pair of needle nose pliers. It won't take much, so don't overdo it
Rastoff
US Veteran
I understand that the slide is not closing. The question is, how are you trying to close the slide? Sling shot? Press slide stop?
There is a trigger safety that prevents the trigger from being pulled when there is no magazine present. It's about an inch from the opening/ejection port of the slide down in the magazine well; you should see a short, fat silver lever obstructing the magazine well. This lever should flip upward out of the way, does it? The only other thing that may prevent a properly functioning magazine from being seated - that I can think of - is the folded metal tab on the left side of the slide lock lever. It sits inside a slot cut into the magazine.
Here is my instructional post on the assembly of this gun. If you read through it you should get a good understanding of how this gun functions and it may help you troubleshoot your problem.
M&P .22 Pistol Assembly w/tips and tricks - RimfireCentral.com Forums
There is already a bullet that is mis-fed. I try to sling shot, but it is blocked by a bullet. I believe that MKBruce has it right, it might be the force is sending a bullet into the chamber before I even try to do anything with the slide.
agksimon
Member
Several of us use ours for non-sanctioned IDPA and we all had this problem when we did a fast reload. I called S&W customer service and the guy told me to tweak the feed lips which I did to all eight of my mags. They now all function perfectly during a fast, hard reload.
Similar threads
