M&P15 picture thread

[ASTMedic]

M&P15 picture thread

Everything you have heard/read about them is true... I too was hard pressed to spend that kind of money on a compensator, but I would buy it again if I had too.

If I was doing a build or in 3 gun I'd go that route for sure. With a hider that gets the job done as it is I just can't drop that coin.

 

[Accobradave]

updated MP15 pics

Heres my new Wilson Combat upper and barrel kit in .458 Socom...Fortis Rev12 hand guard...AimPoint PRO red dot...Troy Buis...all on my MP15 lower

 

[CENTURION24]

 

[thsixscrews]

Got my first mp15 sport, haven't had the chance to shoot er yet tho. Got er used but everything seems to be good. Even the BCG looks new. Whoever had it before me had it coated and then painted the controls and trigger white......don't ask me, heck I don't have a clue!!?? They even coated the EoTech and painted the latch.....hence the name skunk. Think I'm goinna like skunk alright, and so far I love the EoTech!! Sorry for the crappy pics......

Oh yeah, it has the 1/8 twist, 5r. Reckon I got lucky on that too....

Sent from my LGL86C using Tapatalk

 

[hoonshyne]

M&P 15 Sport
Mako Grip / Magwell Grip
CAA Bipod
UTG Pro 13" Quadrail
M-223 Nikon 3-12x BDC Scope
Bushnell TRS-25

 

[D1DAVE]

Hi, new member! My M&P collection (bottom to top). Stock MOE Magpul. M&P Sport with some really nice mods. M&P 15-22. Still stock. Please excuse the cell phone pic, my *******' camera broke!

 

[Chew]

Here's my Sport/predator hunting rig.
All I've done is add a 2-7x32 Vortex scope in Nikon P-Series rings and a Blackhawk sling. There's just enough space to slide a piece of paper between the Magpul BUIS and the scope...no room to spare!





Sent from my iPhone using Tapatalk

 

[ASTMedic]

M&P15 picture thread

Took a few new pics today.

Started out as a stock M&P15 Sport

Added: Troy Delta Battlerail with IWC QD sling mount installed, Magpul AFG, Magpul BAD lever, Magpul MIAD grip (soon to hold extra bolt), Magpul ACS Stock, Primary Arms Red Dot, VTAC sling with BFG sling sleeve, Surefire M951 weapon light with custom P60 XM-L2 drop in LED (approx 800 lumen with strobe), Tareinco pressure switch mount.

 

[shawnfergie]

How do you like the Delta rail? I've been comparing this to the Alpha Vtac for my Sport. Can't make up my mind...

 

[ASTMedic]

M&P15 picture thread

How do you like the Delta rail? I've been comparing this to the Alpha Vtac for my Sport. Can't make up my mind...

I LOVE it! Crazy easy to put on and solid as a rock. People say they don't think its a true free float. I beg to differ though. If you think about it the four screws on the outside are pulling the clamps out away from the barrel and make them squeeze down on the barrel nut, not squeezing the barrel as some seem to think.

I like being able to put rails only where I need them and keep the rest clean.

 

[SquidRN04]

My M&P15OR

My first M&P

 

[JaPes]

M&P15 picture thread

I'm done customizing my 15-Sport. I finally just got it exactly the way I want.

Magpul

• MOE stock
• Enhanced butt pad
• MAID grip with emergency 3-round insert
• BAD lever
• Railed Vertical Grip
• MS3 Sling
• PMags

Troy Industries

• 15" Alpha Rail
• Low profile gas block
• Front folding battle sight
• Rear folding Battle Sight
• 2" rail section
• QD mount insert for rail
• Rear bolt on QD sling mount
• Squid grip inserts

Unknown LED light & light mount. (A friend gave it to me and it worked out perfect)

BCM Gunfighter Charging Handle

Rock River Arms 2-Stage Varmint Trigger

KNS Precision Gen2 Anti-Rotation Pins

Fail Zero AR-15 Nickel Boron Bolt Carrier Group

AR-Restor Hydraulic Buffer

EoTech 512 Holographic Sight

The only OEM factory parts left on it are:

• Upper receiver
• The lower receiver, minus the trigger & trigger pins.
• The buffer tube
• The buffer spring
• The barrel
• The A2 flash hider

It's been quite a journey to get here. The only regret I have is wasting time trying different accessories, trying to go the most frugal route. I wanted a free float rail, but tried to settle for drop in rails. I wanted a holographic sight, but had to try out the less expensive clones. I wanted a good trigger, so I tried to clean up a combat trigger and used different trigger springs. So on & so forth.

I should have just ponied up for good quality accessories from well known manufacturers from the start.

That begs the question as to whether or not I'd buy a 15-Sport knowing what I know now. Yes I would. The 15-Sport's bones are good: the upper & lower receivers, the buffer tube, the BCG, and especially the 1:8 5r progressive gain twist Melonite treated barrel.

 

[yurimaster]

My new M&P15 t

Out of the box, removed the mbus and installed the Troy front and rear folding battle sights.
My .40 shield and 40c accompany along side

Finally got my Eotech 522 on cyber Monday sale

 

[millisec]

Ok not exactly Smith but it does hang with Smith Recent face lift for my Olympic ML-1. Clean & simple but still weighs in at 8 pounds w/o bling or a mag. The broach cut stainless 16" heavy match barrel is a pile driver and bull up to the gas block. Oly got a Magpul CTR, Spikes milspec tube, spring and ST-2 buffer, ambi sling hook, large BCM Gunfighter, Sadlak LP LN gas block, Troy 13" Alpha rail, DPMS Miculek brake, EOTECH EXPS2-0 and all new 30 and 40rd Magpul gen 3's. It may also see a 1-4 or 1-6 scope and maybe some irons. Lower was pretty much good to go with existing single stage match trigger and Hogue grip. Not exceptional but pretty much as good as single stage gets. It did get a Magpul enhanced trigger guard. There's also a Magpul MS3 for use when the Troy Alpha swivel shows up. Still on the fence about using a BAD lever. This gang of two is being joined by a Versa Max Tactical when it shows in a week or so. Just decided to keep my 11-87 pristine and keep killing birds with it.

Always loved this gun but it has two quirks. 1) Its chambered 223 min saami spec 2) The barrel is 1:10 so 63g is about as heavy a load for it. Will eventually build something with a 18" wylde medium contour but not today. Also still loath to ream it out for 5.56.

Well finally got some sling hardware and had a change of heart on optics and abandoned EXPS2 in favor of a Vortex Razor HD 1-6x. Well my aging eyes with slight astigmatism made the decision for me. Granted it was an expensive bag of groceries for the scope, mount and speed dial but I would have spent almost as much between the Eotech and a decent magnifier and mount (plus irons) and still not been happy. Now that I have gotten used to it I think its the most versatile optic I have ever used. Vortex doesn't lie when they claim point blank to 600 yards. Gun did gain a bit of weight though at 9.6 pounds unloaded. Scope alone is 1.58 pounds + mount and dial. The Eotech will likely hang around as a backup or occasional use on my Versa Max.

 

[veeman]

My 1st AR15, M&P Sport

 

[ac15]

My first build w m&p lower

 

[brettskywalker]

Samson 12.37 evolution rail, love it! Love the eotech xps, even though its smaller than the other models,it does add some weight that changes the rifles balance.

 

[linwood]

My Sport with my PSA build

Sent from my SCH-I535 using Tapatalk

 

[Capt Crunch]

My Sport with my PSA build

Sent from my SCH-I535 using Tapatalk

Is that the UTG Slim rail on the bottom one?

 

[linwood]

Yes. Good eyes, Capt.

Sent from my SCH-I535 using Tapatalk

 

[Capt Crunch]

Yes. Good eyes, Capt.

Sent from my SCH-I535 using Tapatalk

Very nice, thanks. I've been thinking of getting one of those to replace an existing quad rail that seems just too thick to me. That one looks great, I think you just made up my mind for me.

 

[linwood]

Very nice, thanks. I've been thinking of getting one of those to replace an existing quad rail that seems just too thick to me. That one looks great, I think you just made up my mind for me.

I really like it. It's solid- stiff and pretty rigid. I was looking at uppers with MI S2 rails, but found the UTG Pro to be so similar in build not to pass up the savings. I am glad I got it.

Sent from my SCH-I535 using Tapatalk

 

[veeman]

Love your backdrop.

 

[Travis15R]

My Newest AR Pic.

 

[liljohn]

How do you like that light? I was thinking about using the same.

Sent from my Nexus 7 using Tapatalk

 

[Pivo]

Sent from my iPad using Tapatalk

 

[BWNinja]

Here's my mp sport, Ade Advance Optics quad rail, magpul rvg foregrip, pmag magazines, Bushnell 1X t-dot scope

 

[gunny4053]

My M&P Sport. I bought it used with a UTG Pro quad rail and covers, UTG vertical grip, UTG red/green dot sight and 3X magnifier, and the MBUS rear sight.



She now sports a Magpul MOE hand guard and CTR stock.



A couple more changes to follow.




Updated: Primary Arms 30mm red dot now sets on top and a MS3qd to keep it in place.





Black and Tan is great.

 

[Gatorade]

Tweaked my rifle again - started life as a bone-stock M&P 15OR. Most recently, I added a Criterion barrel (Wylde chamber, chrome lined, 1:8 twist, mid-length gas port - only made the switch because I wanted a mid-length system with the piston kit) and Adams Arms Lite piston kit, which has made it MUCH faster to clean. Rest of the rifle has a UTG Pro 9" railed free float handguard, Magpul furniture and front sight, Matech rear sight, EOTech XPS optic and G33 magnifier.

 

[Dutchs]

Tweaked my rifle again - added a Criterion barrel (Wylde chamber, chrome lined, 1:8 twist, mid-length gas port - only made the switch because I wanted a mid-length system with the piston kit) and Adams Arms Lite piston kit, which has made it MUCH faster to clean. Rest of the rifle has a UTG Pro 9" railed handguard, Magpul furniture and front sight, EOTech XPS optic and G33 magnifier and Matech rear sight.

How does that barrel shoot for you? I have the RM1 Garand and that's the barrel they put on it in 30-06 and she's a real nice shooter!!


Sent from my iPhone using Tapatalk