M&P15 picture thread

[Mikhail]

This is my M&P15. Its one of the low cost versions without a forward assist or a dust cover which were two things I never used anyways back in my Army days. Well i used the forward assist when preforming SPORTS on the firing range to simulate clearing a misfire for my Instructor but thats about it.
Anyways my rifle came with a Magpul flipup rear sight which I kept. When i installed the low profile gas block and the free floating Diamondhead 13.5" handguards I also put a Magpul front flipup sight to match the rear. It has a reflex sight on it now but Ill be putting either a Vortex Sparc ii or a Vortex Strikefire II and a Vortex 3x magnifer on it next month. Then other than buying a bolton mount for my forward hand grip it will be finished. Well it will be finished untill i see something else I like of course. Mainly i wanted to show off my Diamondhead handguards to you folks as i love em.

 

[JaxMike01]

Just opened the box. My first AR and in excited to go to the range with it. Plan on using it as is for now. Some future plans include a Vortex red dot and maybe a magnifier. I'm hoping on going Prairie dog hunting this fall. By then I should have something with some more magnification.

Sent from my iPhone using Tapatalk

 

[kye4some]

M&P15 picture thread

M&P15 w Magpul lower
I'm a lefty so...
Ambi safety selector (Seekins Precision)
Ambi mag release (Arms Unlimited)
Raptor Ambi Charge handle
Gamma VG6 muzzle break
Juggernaut Tactical free float rail
BCM­ KeyMod Rail Panel Kit (x2)
Geissele Super 42 Spring and buffer
Magpul CTR stock w enhanced pad
LaRul R.I.S.R
BCM GunFighter's Grip Mod 2 (edit back to Magpul MOE grip)
Burris FastFire 3 red dot
Elcan Specter 4x Combat Optical Sight 5.56 knock off
Monstrum Tactical weapons light
PSA Enhanced Polished Trigger
Custom dust cover
Magpul FDE forward assist kit
Blue Force Gear Vickers Combat sling w QD
Law Tactical folding stock

 

[406Blues]

MY M&P 15 AND 9PRO WITH JM930 24''

MY M&P 15 AND 9PRO WITH JM930 24''

 

[406Blues]

2

 

[wmg819]

Fathers Day Gift

Gift for Fathers Day from wife, daughter and son-in-law. Bi-pod not the right one but worked well enough to hold it up for the picture. Now I just need to get one or two accessories.

 

[jdvass]

Here is my very first AR! M&P 15 Sport 2. Added some Magpul goodies and a Vortex Sparc 2. I'm really enjoying this rifle.

 

[Micah Johnson]

My M&P 15

Lots of great rifles in this thread! I feel more than a little outclassed but here's a picture of mine.

 

[Pearsol]

A touch of Stainless

Thought I would add a little pizazz to my Sport II. Got a WALKING DEAD FLASH SUPPRESSOR from RedXArms and stuck it on. Does nothing for performance but I like the looks of it.

 

[ONEiiSHOTiiDROP]

M&P15 picture thread

Deleted........

 

[Smith357]

 

[Raytonium]

My California-ized M&P.

 

[Harry_Callahan]

Hello Folks,

Wednesday I'm going to pick up my first rifle here in Italy, I ordered the 12.5" model

Here is a photo the gunshop sent me via email when they recieved it

 

[jaymz9350]

Still needs a couple things

Sent from my SM-G930V using Tapatalk

 

[Fir3hawk]

M&P15 picture thread

My 15 Sport II and 15-22. Both stock ATM

 

[kye4some]

M&P 15 MOE w mods:

Sent from my iPhone using Tapatalk

 

[Pearsol]

added a bipod

http://smith-wessonforum.com/attachment.php?attachmentid=328364&stc=1&d=1519960459
http://smith-wessonforum.com/attachment.php?attachmentid=328363&stc=1&d=1519960459

 

[scott_0]

M&P15 picture thread

added a stngr vypr 15" hand guard, quality is amazing for the price. and also added Holosun 510c Elite, absolutely love the sight! quality is amazing as well




Sent from my iPhone using Tapatalk Pro

 

[Srruger762]

Installed a Yankee Hill comp. free float hand guard waiting on my new ATN 4K pro 3x14 day & night vision scope to arrive.

 

[Spleenless Dave]

My new Sport II with added stock pad, Magpul MIAD grip and carry handle.

 

[Mr.Shield]

S&W Sport.

 

[revolver686]

M&P Sport 2 with a Bravo Company carry handle, Kley-Zion Aimpoint mount, STI duty sling, Command Arms cheek riser and a Vortex Crossfire red dot.

Sent from my SM-G965U using Tapatalk

 

[Royb99]

M&P-15 Sport

This is my first post in the S&W Forum! And with that, I would like to share my prized possession in my safe, my M&P Sport. It is my prized possession because I bought this AR when I quite frankly did not have a lot of money, but I had always wanted an AR. I got it for $600 at a gun show. Now, I am a lot better off and so I have decided to tweak it a little bit. I added an OD Green Magpul CTR Stock, Magpul K2+ grip, M-LOK handguard with matching vertical grip. Since this was an original Sport, I changed the upper receiver for an Anderson upper with forward assist and dust cover. The one downside is the upper isn't T-marked but that's okay! Also changed the BCG for a Palmetto State Armory nickel plated BCG. Then, I added a BCM Gunfigher charging handle so that it's lefty friendly. I also added a Battle Arms BAD-*** ambi safety selector (important to put blue thread lock on the safety selector). Finally, I added a KNS anti rotation pin set. I plan to add a Magpul MS1 sling in Ranger Green and Sig Sauer Romeo 5 once I have the money!

This AR has been 100% reliable and it is my go to for everything. I own a custom built Troy, but much prefer the Sport.

 

[Micah Johnson]

I ended up selling my M&P 15 Sport II and purchasing this guy. It's an American Defense Manufacturing UIC Mod2. It has all the upgrades I was wanting to do to my Sport II straight from the factory. Geiselle trigger,Criterion barrel, Streamlight Protac HL-X, Vortex Strike Eagle 1-6 and lots more.

 

[wdl]

My Sport II with a full auto mil-spec bolt, 18 inch rifle length barrel 1 in 7 twist Wylde chamber.

Sent from my SM-N960U using Tapatalk

 

[Vaxorth]

This is my first AR platform and could not be happier. Everything I have done to it includes the following:

Magpul MLOK forgrip
Magpul vertical grip
Caldwell bipod
Magpul buttstock
"ACOG" from Amazon... (Can't afford that Trijicon life...)

Anyways, that's my rifle. I love everything about it and only have the grip to change out. Bet you can't guess what I'm going to change it too...

 

[Xrtaco]

Hi ladies and gents. Just got my sport 2 up to where I wanted it. When I first got it I took it to the range and got 100 rounds through it with no jams or problems. Zero'd my iron sights at 50 yards and had fun.

What I put on is

1. Soft rubber Ergo grip because I hate hard plastic grips.

2. Mission first tactical handgrip. Was a bit longer than the Magpul.

3. Magpul AFG grip just works with my ergonomics.

4. UTG BugBuster 3-9 illuminated scope and UTG one piece offset mount. Bought it for my .22 but was over kill so I have it to this.

Next thing I want is probably rubber on my buttstock or a new one. I don't really care as long as it works, a sling, and then maybe a suppressor hmmahahahahah!!!

Leaving the trigger stock because I shoot my M&P Shield allot and it reminds me of it.

 

[IMJB]

M&P15 picture thread

Didnt stay stock for more than 30 mins lmao.

Smith & Wesson M&P Sport II OR

BCM VFG short mod 3
BCM GFH mod 3
BCM SOPMOD stock mod 0
MAGPUL PMAG Gen 3 w MAGPUL MAGLINK
Nikon P Tactical Spur red dot.
UTG 0.5" riser mount



First purchase into the AR world! I can honestly say without a shadow of a doubt the first thing that needs to go/get upgraded on an AR are the A2 grip and whatever stock it comes with if its not Magpul/BCM. I was going to go all Magpul furniture but decided to go with BCM and I have to say I am pleasantly surprised. The handgrip and stock are night and day in comparison to the factory pieces.



Dont mind the tape, was just eyeballing something. Next 2 upgrades are probably going to be a Radian charging handle and a free floating handguard and that is it for this bad boy. What I need to do is put some more range time in ASAP!

 

[Deaj]

There's not much left of my 1st get M&P15T at this point (bottom carbine in the picture). The lower receiver, takedown pins (springs and detents), magazine release, bolt catch, fire control group (the stock trigger is the best mil spec AR trigger I've ever encountered), buffer spring, castle nut, the barrel nut, A2 flash hider, and the M&P branded Troy folding battle sights are all that remains.

The receiver extension is now a BCM 7075 aluminum unit.
The buffer is now a Spikes Tactical ST-2.
The receiver end plate is now a VLTOR SASE.
The safety is now a Battle Arms Development 45 degree ambi unit.
The charging handle is now a VLTOR/BCM Gunfighter Mod 4.
The upper receiver is now an Aero stripped upper with BCM parts.
The bolt carrier group is a Spikes Tactical FA unit.
The barrel is a FN pencil barrel, M249 machine gun steel, midlength gas, & double chrome lining.
The gas block BCM low profile unit, gas tube is from BCM.
The rail is a 12" Centurion Arms C4.
The butt stock is a B5 enhanced SOPMOD stock.
Pistol grip is a Magpul MIAD.
Forward vertical grip is a Magpul RVG.
Weapon light is a SureFire G2x.
Light mount is a VLTOR offset scout mount.
Optic is an Aimpoint T1, mounted on an American Defense QD riser mount.
Weight as equipped is 7 lbs, 9 oz.

The top carbine in the picture is almost completely the same as the bottom carbine with only a few differences:
Aero stripped lower receiver.
BCM lower parts kit.
ALG QMS fire control group.
FN modified lightweight profile barrel, otherwise barrel specs are the same as above.
VLTOR low profile gas block.
Front folding Troy Battle Sight has the H&K profile.
Weight as equipped is 7 lbs, 14 oz.

 

[Pearsol]

Guntec fake suppressor

Throwed this on my rifle. I like the looks even though it's non functional.