M1000 12 Ga - part 2

[jeffob]

I was on the forum end of last year after disassembling, cleaning and reassembling the old Model 1000 Magnum I had purchased at a local gun show. The cylinder was completely gummed up from the disintegrated shock absorber washer. Finally fired the gun today and the bolt almost makes it back to open/locked after firing, but not quite. I can use if as a single shot trap gun OK, but I would like to get the autol-oader functional.

I believe the problem is in the single gas port in the barrel not working with trap loads. The guys at the range felt that it might be the 'spring'. Should I get this over to a gunsmith and any recommendations about what I should ask him to do with it?

Thanks

 

[ko41]

I believe the problem is in the single gas port in the barrel not working with trap loads.

Thanks

That is the problem, you will need to have another port drilled or find a 2 3/4" chamber barrel.
I have heard others that have added a port have also had the port threaded so they could install a plug screw for when they want to use Magnum loads.

KO