deadin
US Veteran
With nothing better to do, I started a small M-H project. I haven't been able to find any parts breakdown pictures so I figured I would do my own.....
Here is a Merwin Hulbert 32 DA at its most basic level....
1 Barrel
2 Frame (Including Hammer Stud & Center Pin w/screw)*
3 Cylinder
4 Side Plate
5 Hammer Stud Nut
6 Trigger
7 Hammer
8 Stirrup & Trigger Lever
9 Latch
10 Loading Gate
11 SA Sear
12 Hand & Spring
13 DA Sear (Lifter)
14 Strain Screw
15 Barrel Release Lever & spring
16 Pin for #12 & #13
17 Loading Gate Detent Spring screw
18 Loading Gate Detent
19 Bolt
20 Stirrup screw
21 Loading Gate Spring & Loading Gate screw
22 Trigger Guard & SA Sear spring + screw*
23 x3 Bolt Pin, Trigger Pin & SA Sear Pin
24 Bolt Spring & screw
25 Latch spring
26 Barrel Release Lever screw
27 Trigger Guard screw
28 Mainspring (Hammer & Trigger)
* These parts didn't want to come out and I decided to be discreet
I have a hi res ( 3.3MB) copy of this if anyone wants it for their library. Just PM me with an Email addr and I will forward it.
Here is a Merwin Hulbert 32 DA at its most basic level....
1 Barrel
2 Frame (Including Hammer Stud & Center Pin w/screw)*
3 Cylinder
4 Side Plate
5 Hammer Stud Nut
6 Trigger
7 Hammer
8 Stirrup & Trigger Lever
9 Latch
10 Loading Gate
11 SA Sear
12 Hand & Spring
13 DA Sear (Lifter)
14 Strain Screw
15 Barrel Release Lever & spring
16 Pin for #12 & #13
17 Loading Gate Detent Spring screw
18 Loading Gate Detent
19 Bolt
20 Stirrup screw
21 Loading Gate Spring & Loading Gate screw
22 Trigger Guard & SA Sear spring + screw*
23 x3 Bolt Pin, Trigger Pin & SA Sear Pin
24 Bolt Spring & screw
25 Latch spring
26 Barrel Release Lever screw
27 Trigger Guard screw
28 Mainspring (Hammer & Trigger)
* These parts didn't want to come out and I decided to be discreet
I have a hi res ( 3.3MB) copy of this if anyone wants it for their library. Just PM me with an Email addr and I will forward it.
