Model 610 has a new home.

[Richard Simmons]

Picked up this Model 610 at an auction yesterday to keep my LH 610-2 company. No box but it came with the unopened bag with cleaning rod, wipe and SAT. It's been shot a good bit but all seems tight and no signs of abuse. It came with the correct/original FG, RB combats but I had these Ahrends on the 610-2 and thought I'd give them a try.

I like them better than the factory stocks but with the longer barrel I believe a set of Ahrend square butt conversion combats might be in order. If anyon3 members have a photo of your 610 with after market wood please feel free to post them. I'd love to consider other options. Over all if I was any happier I'd be twins. Really, rally like this new smokepole.

 

[ishootblanks]

610

Congratulations on a great revolver. What is the barrel length on that beauty?

 

[WCCPHD]

Here's my 610-3 with smooth Ahrends



It currently wears a set of Herrett round to square target grips. Unfortunately I do not currently have a photo of them. I'll try to work on that and post one.

 

[SmithNut]

Here's a couple shots of my project M610, one with RB Boot plus and one with RB to SB conversion Targets, both made by Craig Spegel.

 

[Bob R]

I have a couple of different sets of RB to SB that I run on my 610. I much prefer them over the RB. If I had to guess I would say they are Ahrends but don't quote me on that. Neiter set is marked except the lighter set has an "N" routered into the inside and marked with a number "41".

bob

 

[Richard Simmons]

Congratulations on a great revolver. What is the barrel length on that beauty?

Five inches.

 

[HOUSTON RICK]

Looks very nice, I do not have one. I certainly hope it is a good gun for you.

 

[CH4]

I am jealous!

 

[1911-10MM]

Very nice, I hope to have ne someday

 

[Wise_A]

I'd love one myself. No losing expensive 10mm brass, and you can use plentiful .40 S&W brass for plinking fodder.

I'd really like a 4", but if I came upon one of any length, I doubt I'd be able to resist grabbing it.

 

[Richard Simmons]

Some beautiful 610s. Thanks for sharing. According to the SCS&W S&W made 4,560 combined in 5" and 6.5" versions. Anyone know how that number breaks down between the two barrel length? I'm thinking they probably produced more 6.5" then 5" but I can't justify that with any hard facts, just a gut feeling.

 

[Richard Simmons]

Thought I'd add a photo of my Lew Horton 3". Love my 10's.

 

[Dave Lively]

There are some really nice looking grips in this thread. But the original grips still look good to me too.