Model 657-3 Proformance Center front sight
- Thread starter Grannyman
- Start date
Register to hide this ad
- Joined
- Apr 29, 2012
- Messages
- 4,586
- Reaction score
- 7,791
Is it a dovetail? Dawson Precision should have something.
Is this the gun? The original sight was made by Millett and are no longer being made. Searching eBay or as glenwolde suggested Dawson Precision.
KO
KO
First of all let me say welcome to the Forum
You will find that many of us here are great fans of the 41 Magnum cartridge and the firearms that have been created for it over the years
Model 657s produced by the Performance Center had varying front sights. Everything from the dovetail to Smith and Wessons IFS and of course the more traditional pinned in front sites
A little more information would be helpful. Which Model 657 do you have, 657s were available in barrel lengths from 2 5/8" to 8 3/8" with many different front sights. Posting a picture you might just make things easier
Also why are you looking for a new front sight, are you having trouble sighting in or are you just trying to do something different or has the original front sight become damaged
The more info you give us the easier it will be to answer your question
You will find that many of us here are great fans of the 41 Magnum cartridge and the firearms that have been created for it over the years
Model 657s produced by the Performance Center had varying front sights. Everything from the dovetail to Smith and Wessons IFS and of course the more traditional pinned in front sites
A little more information would be helpful. Which Model 657 do you have, 657s were available in barrel lengths from 2 5/8" to 8 3/8" with many different front sights. Posting a picture you might just make things easier
Also why are you looking for a new front sight, are you having trouble sighting in or are you just trying to do something different or has the original front sight become damaged
The more info you give us the easier it will be to answer your question
eBay is certainly one place to look for a Millet
I just took a look over there and there is a surprising amount of Millet products available
I just took a look over there and there is a surprising amount of Millet products available
The front sight on my PC 657-3 measures 0.415 for overall height, so this 0.460 one on eBay might be the way to go. All the others listed are too short. If need be, you can file a little off the top of the front sight if the gun shoots low and you are out of elevation adjustment with rear sight.
KO
Similar threads
