My reason for joining the S&W forum.

6

63expert

Member
Joined
Apr 5, 2014
Messages
19
Reaction score
86
Location
Southern West Virginia
I joined the forum to learn more and share about my Pre-27 that my father left to me. Unfortunately we didn't talk a whole lot about this gun. I only figured out what it was just the other day thanks to info here. I think my dad may have purchased the revolver brand new, what I know for sure is that he is the one who had it engraved. I have a Pre-64 model 70 that matches it. I think the engraving may have been done in Japan, or the Philippines. I know it has some holster wear, and the side plate screws need replaced, but I like it all the same. I just installed the Hogue grip today. It had a set of Pachmayr presentation grips that I did not like. For many years it wore a set of dark hardwood stocks, and I have no idea what happened to the originals. I put the rosewood grip on because I knew my dad intended to put a really nice set of stocks on it one day. The grips came from the "cosmetic blemishes" section of the Hogue auction website, but I can't find what is wrong with them. I shot it for the first time in decades just the other day. I had a great time with it. I have been an auto guy for some time, but there was something very special about shooting this gun that I hadn't shot since I was a kid.

Serial # S1565xx.

Thanks for letting me share.


Essendubyou by zweitakt250, on Flickr


Essendubyou by zweitakt250, on Flickr


Essendubyou by zweitakt250, on Flickr


Essendubyou by zweitakt250, on Flickr



Essendubyou by zweitakt250, on Flickr


Essendubyou by zweitakt250, on Flickr
 
Last edited:
Register to hide this ad
Welcome to the forum from Massachusetts, the home of Smith & Wesson. This is a great place to learn about all things S&W. That is a great looking revolver and one with family connections, one of my favorite kinds of firearm.
 
It has the very desirable 3.5" barrel. Looks like he had the trigger and hammer jeweled too.

You should enjoy shooting it whenever you can. I'm sure that's what your Dad would want.
 
In case you are not aware, there will be an S that is part of the serial number, even though it will be a quite a bit to the left of the numbers on the butt of the gun.
Very nice gun. I like the engraving.
 
Wowzers! Don't let Jim Brewster see that beauty, he is likely to damage a keyboard with drool.

Very impressive, too bad your dad didn't share more of the story before his passing. Thanks for sharing with us:)
 
Nightowl said:
In case you are not aware, there will be an S that is part of the serial number, even though it will be a quite a bit to the left of the numbers on the butt of the gun.
Very nice gun. I like the engraving.
Click to expand...

Thank you. I forgot about the S. Does it stand for serial?
 
Yes, the screws look like someone used a household screwdriver on them rather than a gunsmith screwdriver.

I really like the engraving. The jeweled hammer and trigger...not so much. I would hunt up case hardened originals and replace them. But that's me.

I also detest the Hogues. But maybe you like them. I would prefer a set of original Magnas. Again, that's me.

All you need now is a fancy belt and holster with tooling and you can BBQ in style.

Nice heirloom. I hope you enjoy it.
 
What an entrance! That is a fine Model 27 with even more meaning with the family connection. I hope you will enjoy it for a very long time until you can pass it along to the next generation!

Froggie
 
SaxonPig said:
Yes, the screws look like someone used a household screwdriver on them rather than a gunsmith screwdriver.

I really like the engraving. The jeweled hammer and trigger...not so much. I would hunt up case hardened originals and replace them. But that's me.

I also detest the Hogues. But maybe you like them. I would prefer a set of original Magnas. Again, that's me.

All you need now is a fancy belt and holster with tooling and you can BBQ in style.

Nice heirloom. I hope you enjoy it.
Click to expand...


Thanks!

Since my dad is the one who chose the engine turning on the trigger/hammer I will keep them as is. I know the Hogues are a bit much, but I plan to shoot this gun quite a bit and I'm a bit particular about my grip fit. I did the fitting and stippling on these grips for my target pistol.


IZh by zweitakt250, on Flickr


IZh by zweitakt250, on Flickr

I figured since the revolver was ornate the grips could be also. ;)
 
Jebus35745 said:
The 27 is awesome, I'd shoot it and remember where it came from when shooting it. The IZH is nice also, how does it shoot? Larry
Click to expand...



I can't help but think about my dad when shooting or cleaning or working on this .357.


JP@AK said:
Most likely by squeezing the trigger . . . :D :D :D

Sorry - I just could not resist!
Click to expand...


The IZh shot too much when I pulled the trigger, like two or three times with one pull!! It shoots well, now. For some time it had the doubling problem, which is common in the 35m. I made a tool to counterbore the bolt face deeper to increase the headspace. That fixed the problem.


One of the things I really like about the Smith is thinking about the men that made it. I am a machinist, and thinking about the great American craftsmen that built this revolver before I was born gives me a good feeling. The parts of the gun where you can see tool marks and then additional hand fitting are truly wonderful. Modern firearms show little of this character to me.
 
Last edited:
One of the things I really like about the Smith is thinking about the men that made it. I am a machinist, and thinking about the great American craftsmen that built this revolver before I was born gives me a good feeling. The parts of the gun where you can see tool marks and then additional hand fitting are truly wonderful. Modern firearms show little of this character to me.
Click to expand...

First welcome to the forum, that's a great heirloom you have.

I agree with your feelings about the craftsmen who produced these great revolvers. Sadly, in many cases that pride of workmanship has been lost over the years.
 
Wonderful gun and history. I really like the plum color of the barrel and cylinder.
 
"The IZh shot too much when I pulled the trigger, like two or three times with one pull!! It shoots well, now. For some time it had the doubling problem, which is common in the 35m. I made a tool to counterbore the bolt face deeper to increase the headspace. That fixed the problem."

That's information you should have kept to yourself. I advise never mentioning that to anyone. Once a machine gun, always a machine gun. You may wish to delete your posting.
 
Last edited:
You must log in or register to reply here.

Similar threads

C
  • Locked
WITHDRAWN: Please lock. S&W 500 10.5" Performance Center *Reduced* Trades added!
Replies
10
Views
2K
cee_Kamp
C
W
  • Locked
Sold/Withdrawn For Sale: Box of grips - S&W and Ruger - (17) sets - SPF
Replies
1
Views
301
WV2A
W
R
My new 27-2
Replies
6
Views
455
Rich427
R
helmsp
Infos on a very unique 19-3
Replies
19
Views
3K
roundels
roundels
D
S&W Outdoorsman
Replies
14
Views
752
jcelect
J

Latest posts

Back
Top