Mythbusters and 500

Joined
Sep 22, 2003
Messages
3,977
Reaction score
4,159
Location
Indiana
Anyone else see Mythbusters and the S&W 500? They confirmed the myth that holding one's finger (thumb) exposed to the barrel/cylinder gap could blow off one's thumb.
 
Register to hide this ad
There is a picture of some ol poor fella who had thumbs WAY forward and when he shot it cut it almost completely off, only hanging by a piece of skin.

Hell I believe a hot 357 load would do the same.
 
Kind of makes a revolver a bad choice for a truck gun, no? Shoot out the drivers side you burn yourself, shoot out the passenger side you burn your wife. I'll keep the Glock 20 myself. Worst case with an auto is a hot piece of brass. I know I'll pay for saying that here.
icon_wink.gif
 
Sure, if you're using something like .357 Magnum or greater. .38SPL, even +P, shouldn't burn too much if at all...

Well, maybe with slower powders...
 
Originally posted by vermilion:
Hell I believe a hot 357 load would do the same.
I had a regrettable experience in my much younger years along these lines with a 28-2 and no reattachment of any body parts was required, although it did get my attention and has yet to be repeated.

Brian~
 
Originally posted by Seven For Sure:
Kind of makes a revolver a bad choice for a truck gun, no? Shoot out the drivers side you burn yourself, shoot out the passenger side you burn your wife. I'll keep the Glock 20 myself. Worst case with an auto is a hot piece of brass. I know I'll pay for saying that here.
icon_wink.gif

Actually, the worse case with an auto is a ftf or fte. Don't have to worry about that with a wheel gun! Also, that hot brass can be pretty painful if it manages to drop into a woman's neckline! Not exactly easy to get out either!
icon_wink.gif
 
I didn't have to be convinced on this story. I saw a guy loose the last inch of his left thumb to a Ruger 454 cusall a year or so ago. There was nothing to sew back on. Looking back on it now it was a bit funny in the aftermath-- The guy asked where the restroom was (public range) the lady that runs the range with her husband (tough broad) told him where it was thinking it was just a cut/scratch. After a half hour in the crapper she went by the open door to see why he was "hogging" the toilet--the guy is white as a ghost kneeling on one knee with his hand in the sink; she said "are you still washing that hand you p*%#y? She then found out he had shot the end of the finger off , then came the ambalance, and so on. I damn neared died when we went out to see about gathering up his stuff to store it for him. It looed like someone shot three deer. Anyway, everyone now knows about the thumb dude and how "hard assed" the old lady is ( she is realy sweet to most everyone
icon_wink.gif
).
 
I believe that the smith that the Mythbusters used was a 5" .460 with a hi-vis front sight.
It must have happened before as this is page 19 out of S&W's current owner's manual

smithmanual.jpg
 
I saw the episode I never doubted it was possible as hot as the 500 is. I got a pretty nasty burn from a .22 magnum in my single six. I rested it on fence with my hand near the cylinder gap, I was new to revolvers at the time, needless to say I won't do that again.
 
If there is no other valid reason for me to read this forum then this would be the one. I had never heard of this and didn't know it was possible until I'd read it here. Now as to why ANYONE would grip a revolver in that fashion is beyond me...
 
Originally posted by Seven For Sure:
Kind of makes a revolver a bad choice for a truck gun, no? Shoot out the drivers side you burn yourself, shoot out the passenger side you burn your wife. I'll keep the Glock 20 myself. Worst case with an auto is a hot piece of brass. I know I'll pay for saying that here.
icon_wink.gif

It wouldn't be just the blast at the B/C gap, the concussion and overall noise from a .500 Mag (we were talking about the .500 right?) across your chest would be staggering and that is a gross understatement. Your life had better be on the line because you're going to pay for such a shot. Don
icon_eek.gif
 
Originally posted by BE Mike:
Anyone else see Mythbusters and the S&W 500? They confirmed the myth that holding one's finger (thumb) exposed to the barrel/cylinder gap could blow off one's thumb.

I never understood why someone would doubt the damage potential in that situation. Anywhere from 40-60,000psi screeching out of a thin B/C gap is going to do serious damage to soft human tissue. Don
 
Which one of you are going to do the field testing on this so we will all know what it will do. The fire that I have seen coming out of a 32 long, I don't want my hand near it.
icon_wink.gif
 
Some time back I had a brain fart while doing some load development with a .357. Shooting off of a sand-bag I will massage the bag with my left hand to adjust he sights on the target. Naturally, I got my left hand too close to the b/c gap, and it peppered my hand and embedded fine particles in the skin. Hurt like @#$%@#!!. That was the last time I did that.
 
You know, I have brought several shooters to my range who attempted to shoot a revolver this way. I was right there and offered grip instruction, but if I had not been there, they would certainly have hurt themselves, dropped the gun, or worse.

I find the ones who grip like this have used 22s and had no need to grip a gun properly. They think they know what they are doing but really do not. That's why I NEVER let anyone shoot at my range without my being there the first time (or more often if I feel it's required).

Misty,
Hello! I had to laugh at your reply. My step-daughter did a heck of a unique "dance" one day when a .22 case slipped down her front-side...fortunatly I was right there and managed to keep the Ruger Mk2 pointed down range as she proceed to let go of the gun!!
icon_eek.gif


As a general rule: I advise lady shooters NOT to wear low-cut tops when shooting (I really hate this safety rule).

I also ask folks to wear a billed cap to keep brass from getting in along the glass frame and skin...I learned this one first hand! Ouch!

I also suggest people do NOT wear sandals while shooting as I've seen several "range dances" occur when hot brass falls in between one's toes!

Bob
 
I'll try it with my 6.5" 500 next time at the range. I will try it with a carrot with different loads. And see what load works the most damage.
 
Originally posted by VonFatman:
As a general rule: I advise lady shooters NOT to wear low-cut tops when shooting (I really hate this safety rule).
I hope you don't apply that rule to attractive females do you??. Yes, I've been called a pig by women before, it won't be the first time. Don
 
When I was a kid (early 20s, actually), I saw photos of Elmer Keith using his back rest shooting position with the handgun held against his drawn-up knee. I tried it, but didn't get the gun far enough forward for the cylinder gap to clear my leg. When I touched off my 4-inch Model 29 I thought I'd either shot myself in the leg, or had been hit by lightening! I was lucky enough to get away with a hole ripped in my pants and a painful burn on my leg! It was a lesson I've NEVER forgotten!
 
Back
Top