Need help with hydraulic clutch

[sar4937]

Make sure to use the reservoir that comes with the Mity-Vac. I have had several that frothed the fluid so bad I just had to walk away for twenty four hours. The main problem is you have to get the piston in the slave to extend in order to push the air through the bleeder screw. (bleed) don"t be afraid to unbolt the slave and let the bleeder screw point up. Even though it's been stated otherwise, if fluid is migrating through the system air will rise to the high point of the system (eventually). Open the bleeder screw and fill the master cylinder while the slave drains. This will take awhile, and if the slave is unattached with the bleeder screw up the air will come out. Frustration will put the air into suspension in the fluid via continued pumping.