Reloaded 45 wont fit in the cylinder w/pics now

[shovelwrench]

EPJ,
I use the LFCD, and 452 cast bullets. I saved a squib I had half way down the barrel, it was still 452, but you could see, was touching the grooves.

BruceM, idahostreams,
With a .454, which i beleive is grossly oversize (unless you have slugged your bore) and would only needlessy raise pressures, the LFCD is probably resizing that one for ya.

IMO

 

[idahostreams]

Difficulty chambering .45acp in revolver

BruceM
My 25-2 has oversize throats and .454 fit it well. Accuracy has improved dramatically with the .454 bullets compared to .451. There is very little resistance when crimping with the LFCD. I know the feeling if that die is sizing down dramatically as I use the LFCD for all my handgun reloading in .38,.357 mag, .44 spcl and .44 magnum as well as the ,45acp.

Julian