Rummaging and found Nyclads....

Right about the time they stopped making them I came in to a stash of the 125 gr. HP Nyclads, 250 of them standard pressure and 250 +P. I thoroughly enjoyed shooting them in my snubbies. I found them very accurate, and wish I'd set some aside. To my recollection I have shot two feral dogs with this load, plus put down a mortally-injured cow. I don't know what that tells you about what sort of a defensive load it will be, but it will darned sure kill very efficiently.
 
What solvent does one use for nylon fouling?

Mike - I've not shot enough Nyclads to ever witness them fouling - and doubt they're moving fast enough to make very much.

I shoot a lot of sporting clays and plastic fouling can pop up often from some brands of shotgun wads. A little carb cleaner on a bristle brush easily takes care of it.
 
...also heard that it was developed for NYPD (?) to reduce lead exposure in indoor ranges. I could be all wet or hampered by older age, but "NY" in NYCLAD was short for NYC's finest.
 
I used to carry them in my Model 60 when I was stationed on Guam. I was an Air Force SP so I had to carry my trusty Model 15 with PGU ball on duty but also I had a Guam concealed weapon permit. The Chief's Special was my constant companion off duty, and sometimes found its way into my bag at work.

One midnight shift the LE flight chief and I grabbed the key to the range and headed out to shoot toads. Guam toads come out at night in huge numbers. They are big fat monsters and are unavoidable on the roads, which are made of crushed coral and slippery anyway and even moreso with a layer of popped toads on them. After a rain the paved parts of the range would be awash in toads.

We had some PGU ball with us so we swapped out our mildewed issued rounds with shiny new ones and commenced firing. After awhile the flight chief said - LT, don't you think the range guys are gonna be suspicious of all these pistol-shot toads?

I conceded his point, but decided to try out my Model 60 and its Nyclads on a few toads. It was impressive. Where most of the FMJ victims just rolled over, the ones hit with Nyclads blew open with style.

I saved the last one for a coconut hanging about ten feet up a tree. I got it dead center and it hit the ground bleeding milk profusely. I pried it open and the Nyclad was still inside, perfectly expanded. I was impressed.

We reloaded with the old rounds so as to allay suspicion on turn-in. No one complained of the shot-up toads.

I'm not sure how it works on people, but for toads and coconuts it was first-rate.
 
I bought 4 cases of the S&W branded 158g 38 sp around 1984 for my Python. It was relatively inexpensive. Probably transition period to Federal. Still have a case and change to burn up since I also shot other factory ammo.
No complaints as range ammo!
 
At the time, there was a bit of controversy with this round, as it was claimed to be a "cop killer bullet"

My wife has carried Nyclads in her 38SPL PDW for decades.
The "cop killer bullet" rep started because the original nylon coating was black. The Teflon bullets were also black. Federal changed to a blue coating to distance them from the rumor mill. I still have a pair of boxes of "Blacks" in my Nyclad stash.
 
Back in the Spring of 1979 I was enrolled in a graduate class at William and Mary. As luck would have it, one of the few other "real people" (as opposed to dewy eyed liberals) in the class was an FBI agent about my own age. At the end of a field trip where we had been discussing interesting things like guns and ballistics while everybody else talked about parties and who was dating whom, he motioned me over to his vehicle. He pulled a new box of 158 gr Nyclad +Ps, took out six rounds to "get home" with his duty weapon, and gifted me the rest. Over the years some of those have been shot up but my stash has been replenished a few rounds at a time... I tried them successfully in my Model 66 ND 4", my Model 60-4, and even one cylinder full through my Baby Chief. Now I keep the half box or so I have left for "serious use" but would gladly pay a premium to pick up another box or two. I didn't know about the 125 gr version for Chiefs Special, but would dearly love to have a box for Baby.

Froggie

PS Were all of the cases nickel plated? All I have observed have been.
 
Were all of the cases nickel plated? All I have observed have been.

The Nyclads I've had, including the 9mm and .38 Special ones from the 90s (at least that I can remember) and the recent run (see the photo in my earlier post, #8) have had nickel-plated cases. Don't know about the earlier generations.
 
Years ago a forum member had a karma drawing and I got lucky. They sit in the safe, not sure why but if I ever run out I'll shoot em up.
 

Attachments

  • NYCLAD38s.jpg
    NYCLAD38s.jpg
    145.6 KB · Views: 37
In the mid 80's I got a box for my CZ-75. They were supposed to be the best carry ammo at the time. Every time I unloaded it the chambered round had been pushed back into the case. Anyone shooting the revolver rounds have any pull forward out of the crimp? I never got any more 9mm as I'm sure pressures were way to high with the slug pushed back on top of the powder. Switched to Federal 115 gr JHP.
 
I did a 36 round qual. course with Nyclad rounds out of my 5 shot 36 back in 1990 or 91. All I really remember was the blue coating flaking off and getting stuck under my ejector star. This prevented me from closing the cylinder. Not sure if this was a common problem, or I just had a bad batch of ammo.
 
I do not think there has ever been a bullet or cartridge that has had more discussion and mystery/mystic about it.Its magical, wonderful state of the art!
Its a coated lead bullet!:D
But then there are the Teflon coated BLACK TALON strikes fear across the USA!:eek:


iu
 
Several years ago Cabela's had some Herter's brand 9mm that was aluminum cased and total nylon covered 115 gr ammo. I bought at least one case and maybe more because it was cheap. I still have a partial case left. It was obviously CCI/Federal in origin.
 

Latest posts

Back
Top