bought it new a couple months ago, shot it 4-5 times and you had to get at least 5yds or closer to hit near the bulls eye, if you started going out farther then 5yds. it is shooting a min.6" low. Had 3 other people shoot it with same result, and tried 4 or 5 different types of ammo same result. It shoots good groups only not where your aiming. Maybe the elevation sight is way off. Can't believe that it would leave the factory shooting like that. I asked them to put a note in the box telling me what the problem was when they send it back to me, as Im curious what it is. will post back when I get the gun back from them.
sent my sd9ve back to S&W today
- Thread starter hibby
- Start date
Register to hide this ad
Bundesheer
Member
- Joined
- Jul 16, 2014
- Messages
- 114
- Reaction score
- 73
Huummmmm.
Do you realize that a weapon is a tool?
The weapon does not shoot, you do.
The weapon does not aim, you do.
The weapon does not pull the trigger, you do and only you decide when it fires.
Having said that means that:
1) you are may be an inexperienced shooter that let follow the muzzle the trigger-finger on the trigger and shot low.
2) You don't have a closed grip around the gun and shoot left.
3) Or you know how to shoot and the tool doesn't fit the comfort of your hand.
If 1 is the case practice more. My mil-trainer helped here out and let us shoot every second round with the middle finger on the trigger.
If 2 is the case practice more
If 3 is the case get you a new gun that fits better your personal needs.
Don't mess with tools that you not able to handle.
Does this make sense to you?
Do you realize that a weapon is a tool?
The weapon does not shoot, you do.
The weapon does not aim, you do.
The weapon does not pull the trigger, you do and only you decide when it fires.
Having said that means that:
1) you are may be an inexperienced shooter that let follow the muzzle the trigger-finger on the trigger and shot low.
2) You don't have a closed grip around the gun and shoot left.
3) Or you know how to shoot and the tool doesn't fit the comfort of your hand.
If 1 is the case practice more. My mil-trainer helped here out and let us shoot every second round with the middle finger on the trigger.
If 2 is the case practice more
If 3 is the case get you a new gun that fits better your personal needs.
Don't mess with tools that you not able to handle.
Does this make sense to you?
Last edited:
bundesheer, I guess every gun that you have bought has been perfect! I find it hard to believe that 4 different people (experienced shooters) have all shot this gun and have all had the same result. Accuracy does come from the shooter once its sighted in, but I forgot you think every gun is perfect out of the box!! You must live somewhere else in a perfect world to think there aren't mfg. defects in products today. Its not always the consumers fault, and I would be the first to admit that the problem is me if everyone else that shot this gun didn't have have the same identical results. I love this gun and thats why im sending it back to have it looked at and hopefully get an answer from them as to what they found.
Bundesheer
Member
- Joined
- Jul 16, 2014
- Messages
- 114
- Reaction score
- 73
Sure not. I just bought a Walther PPX and have a lot of problems with the firing pin and I learned that I am not the first and only one.
Accuracy has something to do with the shooter even if U don't believe it.
It's all about knowing and adjusting. The shooter adjust his gun to his needs in sight and handling.
But that takes time and is called customizing.
I really want so see how S&W, Glockmeister, Benelli, Beretta, Ruger, Sig, Taurus, Mauser .... want to create a gun that fits all hands and temperaments of any given customer so that the customer have not to learn his tool. Just take it out the box, fill a bullet in, pull the trigger and hit the 100 spot 2 times with one bullet.
Yes I know everything has to work automatically today , just like a PC game. Hit the button and everything works on it's one and if U do something wrong it makes a peep.
Guns don't work like that. Welcome in the reality.
Last edited:
- Joined
- Aug 21, 2005
- Messages
- 8,020
- Reaction score
- 7,101
I will be surprised if there is any comment whatsoever as to what the problem is or was.
bundesheer You say its all about adjusting and knowing how to use your tool, and how the gun grip doesn't fit you bla bla bla. If I want to aim 6-8" high every time, my gun shoots fine. I guess thats what you call adjusting,customizing and knowing your TOOL! I didn't buy this gun to have to hold 6-8" high to hit where Im aiming. Its funny how 2 of the other people that shot my gun have the exact same gun as I and I can shoot both those guns and put a 3"group from 10yds exactly where Im aiming. Its useless replying to anymore of your ignorance. Does this make sense to you!!!
Bundesheer
Member
- Joined
- Jul 16, 2014
- Messages
- 114
- Reaction score
- 73
Yes it make sense.
You win.
You win.
HI hibby, it will be interesting to hear what S&W has to say about your gun.
In the 10 to 14 days it will take to get it back we can talk about it.
My SD9ve does also shoot a little low not to the extreme yours is.
You said anything past 5 yards shoots 6" low , I have not shoot at 5 yards since the first day I got it & then I was more concerned with getting the trigger pull down pat. it was not until some time later that I came to see that it was shooting a little low at 8, 10 & 15 yards.
,
This is what I came up with to help me put the rounds where I wanted ------- o 0 o -------- I hold the front sight up just a little.
Now I am by far not the best shot but I am confident I can hit body mass up to 15 yards. Better if I talk my time.
But this being for my home & self-defense I practice drawing or picking the weapon up find the target & hit it.
Mine has been good right out of the box, but I've had other guns that weren't. It is NOT always the shooter, even if the shooter is brand new (I'm not).
I recently had a Shield that acted up on me. It was accurate, but I couldn't rack the slide. I had all kinds of advice and all sorts of comments when I sought other's experience. Most told me I was a wimp and that If I shoot it a bunch it would get better. I'm not and it didn't. I sent it back to Smith & Wesson. It came back three weeks later with a new recoil spring, and some other work done to its slide. It works perfectly now.
Get a label from Smith & Wesson. They'll email you one and the shipping will be free. They schedule stuff, so the label will not appear in 30 seconds after you talk to them. It may take a couple of days.
But they WILL fix the gun. I have had them do a couple of other things to the guns I've owned over the years. I have never had an issue with them. The SDVE is a good gun. if you are having problems, it is surely possible that you have one which got all of the manufacturing tolerances too close to the limits. It is possible that you need more practice, too. We all do. But its not a given that the problem is you. You are going to live with the gun for a long time. The three weeks that it takes to get it examined will melt away quickly.
Good luck.
I recently had a Shield that acted up on me. It was accurate, but I couldn't rack the slide. I had all kinds of advice and all sorts of comments when I sought other's experience. Most told me I was a wimp and that If I shoot it a bunch it would get better. I'm not and it didn't. I sent it back to Smith & Wesson. It came back three weeks later with a new recoil spring, and some other work done to its slide. It works perfectly now.
Get a label from Smith & Wesson. They'll email you one and the shipping will be free. They schedule stuff, so the label will not appear in 30 seconds after you talk to them. It may take a couple of days.
But they WILL fix the gun. I have had them do a couple of other things to the guns I've owned over the years. I have never had an issue with them. The SDVE is a good gun. if you are having problems, it is surely possible that you have one which got all of the manufacturing tolerances too close to the limits. It is possible that you need more practice, too. We all do. But its not a given that the problem is you. You are going to live with the gun for a long time. The three weeks that it takes to get it examined will melt away quickly.
Good luck.
Last edited:
Bullet weight, aiming point and distance to target all affect where the bullet hits. Most handguns are sighted in for 25 yards. If you shoot at a closer range than that bullets will impact lower on the target. Some guns are sighted at the factory for a center-hold, while others are sighted for a 6 o'clock hold. Your aiming point also affects the bullet impact point. If your gun is shooting low with 115 gr. ammo try 124 gr. That will also raise the impact point of your bullets. I hope your gun returns quickly. Try a center-hold off a solid rest at 25 yds. when you get it back, and then adjust your bullet weight up if you still get low hits.
Best Regards,
ADP3
Best Regards,
ADP3
got my gun back yesterday from S&W
They did have a note in the box what they found and did to my gun. They said the front sight was messed up and put a new one on it and checked everything else over and it looked fine after testing it. I went to the range last night and had them in or near the bullseye with 2-3" groups from 10yds. Thanks S&W for fixing my gun and getting it back to me in two weeks!
They did have a note in the box what they found and did to my gun. They said the front sight was messed up and put a new one on it and checked everything else over and it looked fine after testing it. I went to the range last night and had them in or near the bullseye with 2-3" groups from 10yds. Thanks S&W for fixing my gun and getting it back to me in two weeks!
MyDads38
Member
Anyone can get something that doesn't work exactly as it should, and not just guns. Customer Service after the sale will tell you a lot about a company and it's products. KUDOS to S&W on their customer service and support!
I know there are a lot of nice firearms on the market these days, but I don't personally own any that don't have Made in the USA stamped somewhere on them; and this is specifically why! Not bashing anything/any brand at all, but owning a S&W firearm to me, means quality & support right here at home.
Glad you got your SD back and all is okay. I am a new owner myself, with only 150 rounds through mine so far. Each time I pull the trigger, I have a smile on my face and another hole in the target!
I know there are a lot of nice firearms on the market these days, but I don't personally own any that don't have Made in the USA stamped somewhere on them; and this is specifically why! Not bashing anything/any brand at all, but owning a S&W firearm to me, means quality & support right here at home.
Glad you got your SD back and all is okay. I am a new owner myself, with only 150 rounds through mine so far. Each time I pull the trigger, I have a smile on my face and another hole in the target!
Guess it's was gone a little longer than you wanted but glad it fixed for you
.no marks on either sight, they just replaced the front sight, I would asume that it is an m&p front sight, it looks just like my 2 friends 2 front sights on their guns. I marked both front and rear sight before I sent it off to them so if they said they replaced them I would know for sure by the little marks I made on them would be gone. The front sight was replaced as the small mark I made on it is gone. Thats all I know.
Papa_D
Member
Glad it got taken care of so quickly. As stated before, this speak volumes of S&W as a company, especially to someone like myself considering an SD9VE for their first Handgun purchase.
The SD9VE is a great gun...inexpensive, fits most people's hand well, and very reliable. The trigger is heavier than many other striker-fired semi-autos, but lighter than most DA pulls on revolvers and DA/SA or DAO semi-autos. It does take some practice to shoot accurately with a heavier trigger, but it isn't that hard to learn trigger management, aiming, etc.
When you get your new gun, if you decide on a SD9VE, shoot it for a while first before you think about making any modifications to the trigger. The best thing you can do is clean the gun, load the magazines to full capacity and let them sit for a week or so before going to the range, and leave the slide locked open for the same time. Use good factory ammo...FMJ is good for practice, for the first hundred rounds or so, and then shoot some of your preferred SD rounds to make sure they function in your gun.
Similar threads
