Have any of you removed this sight? I'm thinking of something different for my 37-2.
Sight Change
- Thread starter LAH
- Start date
Register to hide this ad
That's a high dollar night sight. If you do remove it, do so carefully. It has a tritium vial inside that can be broken. If handled with care, it can be sold or used on another gun.
OP
Thank you. Not sure what it is but it doesn't glow in the dark & the white dot disappears in the sunlight. And for me, it doesn't work with the rear notch.
It must be a custom job as the original has an integral FS. Usually such a sight would be pinned in but there's no sign of a cross pin. Is there perhaps a set screw inserted longitudinally from the muzzle end? Otherwise I guess it could be epoxied or Loctited in, which would require the application of heat to release.
Whatever you replace it with will also have to be a custom install. I suppose the tritium vial could be removed and the hole filled with a pin and re-blackened, or a brass/gold pin put in. This may not solve the "doesn't work with the rear notch" problem, though.
Whatever you replace it with will also have to be a custom install. I suppose the tritium vial could be removed and the hole filled with a pin and re-blackened, or a brass/gold pin put in. This may not solve the "doesn't work with the rear notch" problem, though.
OP
There are markings on the front & top, neither are readable. I'm guessing it is mounted with glue or epoxy.
By the rounded profile it might be XS. Many others have a square top.
From the XS website:
S&W J Frame Integral Front (Fixed Rear): Installation for the J-Frame with an integral front requires a gunsmith to mill away most of the existing front sight ramp. Any two-part epoxy, like JB Weld, then affixes the Big Dot onto the existing stub. View Written Installation Instructions.
Last edited:
