So I bought an M&P 10mm **Range Report post# 16**

[tlawler]

Bill Clinton-ish preachiness right there. Not at all helpful to the many 10mm M&P purchasers with a defective problem-gun, like the O.P. (two of them now) in the other thread running here.

How did you come to the conclusion that mine was a problem gun? It’s just getting broken in, and my issues were related to ammo type(it didn’t like flat point lead that I normally shoot in my revolvers) and needing to be cleaned. I’m taking it out again this weekend after a good cleaning and with proper ammo and I’m sure it will run fine. I’ll post my results.

 

[colt_saa]

How did you come to the conclusion that mine was a problem gun? It’s just getting broken in, and my issues were related to ammo type(it didn’t like flat point lead that I normally shoot in my revolvers) and needing to be cleaned. I’m taking it out again this weekend after a good cleaning and with proper ammo and I’m sure it will run fine. I’ll post my results.

That was not meant as a reference toward your pistol

In Frank's anger toward me over a previous 10MM Auto thread, he chose his words poorly here in this thread.

He was trying to say that the OP of the other M&P 10MM thread had now received two pistols with the identical problem

 

[hardluk1]

So my question for all of you M&P owners is: who makes a decent leather IWB for it?

The Comp-Tac Infidel Ultra Max - It is not all leather but a hybrid holster . Leather back side and Kydex front half that is changeable for different handguns if needed .

I Have used a MTAC for my m&p's one thats 12 years old and an old design Neutral for 18 years and have far less handgun wear than shown on all leather lined iwb that my first holster for 16 years was even on a blued 1911 that I still use my old Neutral hybrid with .

My last purchase was a m&p 5" PC 40sw and decided to try the Infidel Ultra Max . I really like this holster . Is not as adjustable as the other two but is cant adjustable and carrys high enough for me . My other two I wear as high as can be adjusted !! . I wear this new holster just in front of my side seem in my pants or side belt loop on most pants - about a 2:50 to 3:00 carry with a forward cant . I find it a very comfortable holster and like with the other comp-tacs the leather is very pliable .

My wife and I will use a MTAC that I notched the front edge so a m&p core or 2.0 compact OR can be carried . I think the new MTAC bodys are made for optic carry today .

I can say I have been running 20lb springs in my 40sw's both a early ge1 4.25 full size and now in the 5" ported pc . Thats a heavier spring than m&p runs and mine cycle fine with both standard loads and underwood 600 ftlb 1300fps + loads . Glad yours runs well but keep the spring upgrade in your mind to maybe try . Galloway Precision stocks spring , Glock ISMI springs are the same too .
Infidel Ultra Max

 

[tlawler]

Picked up a Holosun 507c for the M&P 10mm

I picked up a Holosun 507c with the green reticule this morning and mounted it on the M&P. After a good cleaning and lube, my daughter and I took it to the range and gave it a good try out. We both loved it! No more wearing cheater glasses under my safety glasses. We ran another 200+ rounds through it of Berry’s plated 180gr. over 10.2gr. Bluedot and the cleaning really made a difference. Not one malfunction! My total round count is up around 750 or so now. Looks pretty good with the Holosun mounted too!

 

[LVSteve]

It will be interesting to see if your gun starts to play up with factory ammo as happened to another member.

 

[tlawler]

It will be interesting to see if your gun starts to play up with factory ammo as happened to another member.

But I have no intention of putting factory ammo through it. Just not gonna pay fifty cents plus per round. Nope. Not gonna do it.

 

[epj]

But I have no intention of putting factory ammo through it. Just not gonna pay fifty cents plus per round. Nope. Not gonna do it.

Me neither. Got lots of 10mm brass, powder, primers, and bullets.