I went to a local gun shop, and I tried out the triggers on a few guns, including a 686+, a Ruger gp100 and a sp101. For some unknown reason, I couldn't pull the double action trigger on the s&w, but was able to on the rugers, the 101 having the easiest trigger pull, which is strange in of itself. All the guns were brand new, and the guy behind the glass had no trouble pulling the double action trigger on the s&w. Can anyone think of an explanation for this?
something strange happened...
- Thread starter circa1981
- Start date
Register to hide this ad
05CarbonDRZ
Member
Carpal tunnel?
Man card revoked?
Nothing that a trigger job won't fix, I am sure.
In fact, if you are comfortable pulling off the grips and side plate, you could install a Wolff Power Rib Type 2 mainspring and (optionally) a Reduced Power Rebound spring and dramatically reduce the trigger pull compared to stock springs. I saw it on YouTube, so it must be true.
And, it looked easy to me.
Wolff Springs For The S&W 686P - YouTube
In fact, if you are comfortable pulling off the grips and side plate, you could install a Wolff Power Rib Type 2 mainspring and (optionally) a Reduced Power Rebound spring and dramatically reduce the trigger pull compared to stock springs. I saw it on YouTube, so it must be true.
And, it looked easy to me.
Wolff Springs For The S&W 686P - YouTube
It is possible that the cylinder wasn't latched completely when you tried it, and the salesman simply happened to close it all the way when he took it and tried it.
Can't be, he then gave it back to me and I still couldn't budge it. It's so strange, especially because the Rugers were great, and their suposed to have inferior triggers.
Modified
Member
The brand new rugers are pretty amazing. I've seen a couple brand new smiths through the local gunstore that had some serious QC issues. A brand new J-Frame shouldn't have a trigger that is difficult to pull, gritty, with terribly pronounced stages.
I handled a new SP101 the other day that I swear locked up as well as a brand new Python. I couldn't believe it. I'm not sure what Ruger is up to exactly, but whatever it is I like it.
Not trying to be a wise guy in any way, but how old are you? It sounds like you need some strength training in your hands. Get a rubber ball/tennis ball etc., and do as many squeezes with each hand as you can. Wait a few minutes and repeat. Do this every night for a month or two, and you'll be surprised at how much better your grip and hand strength will be.
Ruger has improved their once horrific triggers dramatically, while IMO, S&W has gone downhill, but certainly no where near enough that an average early teenage girl would have any trouble pulling the trigger through a D/D pull completely.
That's interesting that your non dominant hand is stronger.Have you injured the right hand at some point in the past?
I bet there's some nerve damage there.Have you tried shooting left handed yet? It feels awkward at first,but it's fairly easy to learn.
I started fooling with it a few months ago due to fading eyesight,but I found it quite easy lol.Your kind of limited to single action for now unless you can build that hand up.Give it a try.
Unexplainable loss of hand strength without pain or a decrease in sensation can be indicative of a condition called radial nerve entrapment.
If you've been losing hand strength, I'd suggest you check with you doctor and ask if it could have neurological origins.
If caught and treated early enough, strength can be regained. If, however, the condition is neglected, it can become permanent and degenerative.
There's no reason a young fellow should have trouble with the double action trigger pull of a Smith and Wesson revolver in good working order.
If you've been losing hand strength, I'd suggest you check with you doctor and ask if it could have neurological origins.
If caught and treated early enough, strength can be regained. If, however, the condition is neglected, it can become permanent and degenerative.
There's no reason a young fellow should have trouble with the double action trigger pull of a Smith and Wesson revolver in good working order.
Last edited:
Certainly, finding a way to improve nerve function and regain your normal strength is worth pursuing.
Here's hoping your hand responds well to whatever treatment you can get.
In the meantime, if you "must have" this pistol or another similar revolver, trigger jobs are pretty affordable. Also, as described in my earlier post in this thread, changing two springs is likely to be sufficient and could be done quickly by almost any smith if you prefer not tackling it yourself.
Depending on your relationship with the shop where you saw this revolver, you might be able to pay them for a spring change and make the final purchase contingent on the results.
Best of luck, sir!
Hmmmm...didn't eat your Wheaties.
