Taurus Story, not mine ;-)

We've all had different experiences with different guns. I love my S&W 22A and won't hesitate to tell anyone, and I've been beat up unmercifully on other boards with people telling me what a piece of junk it is.

Yep, me too. I have had nary a misfire of fart from my 22a, put a Millet red dot on top of the barrel and have had a ball! Just ordered a 4" barrel from S&W and look forward to running open sight drills on my swinging targets. Best training tool for the money!

jb
 
I had a Taurus PT-22. Slide cracked under the front sight, they fixed it no charge. I sold it because no matter what magazine I tried it absolutely would not feed the next to last cartridge. To be fair, I have never owned a reliable .22lr pocket auto from any manufacturer. Joe
 
This Taurus was an older one, so it would be a bit unfair to compare it to a new one even though it had maybe 1 box of ammo through it.

Since I have limited space in my gun safe, I have upgraded my guns as much as possible to the best I can afford.
 
I've been told about the lifetime warranty. It's not worth it to me. I grabbed a screw driver and scrambled the innards really nice. I then screwed the cover back on so it's like a baby's rattle now.

I kept waiting for the punchline after this, but must have missed it...

Really? I suppose it's yours to destroy if you wish, but that could have been repaired and sold to someone who may not have been able to afford the very best as a self defense weapon.
 
Speaking from experience, I have owned four different Taurus revolvers. No longer have them. All had issues with timing and/or cylinder lockup. I gave them an honest try. never again.

When I trust my life to a gun I don't look for cheap guns. I won't put a price on my life.

I never felt comfortable carrying a Taurus product.
 
Bought a used Taurus 44 mag. It needed an action job. Took the sideplate off; there on the side of the hammer (covered by frame) was a large void in the metal. Almost halfway deep through hammer. Put the sideplate back on & sold it. That was the mid-90's. I understand quality has improved. But I still consider them second rate now.

I'm sure Hyundai & Kia make quality cars; but, I won't buy either of those too.
 
Again I suggest that people check out the Taurus forum in regards to the Mil. Pro series of handguns. The newer magazines have had some problems but most of these guns have spotless records. I wouldn't trust my life to a cheap gun either unless I had thoroughly checked out that gun myself. I had another concealed carry handgun available to me the entire time I was checking out my Taurus. It passed my tests with flying colors. Those tests included firing at least 1000 rounds and looking for any malfunctions or abnormal wear. I never had either. I could have paid twice what I paid. In fact I expected to pay twice as much when I went to gun shops looking for a smaller concealed carry gun for summer carrying. What I found was the best gun period. Not just the best gun for the money. I know Taurus has a reputation for sometimes cutting corners big time but I made sure that wasn't the case with my PT-145. Now I couldn't possibly be happier with any gun at any price. It's extremely accurate, completely reliable, has a grip that is second to none, and has a higher capacity than any gun it's size and caliber. I don't know how any gun could surpass what I have. Remember I have a much more respected name brand gun that also cost nearly 3 times as much new. I never carry that gun now even in the winter. The Taurus is a better gun. In fact I've never seen a gun built better for the purpose of concealed carry and that includes all models and brands. The fact that it was a fantastic deal was just icing on the cake. I'll put my PT-145 up against any concealed handgun from any manufacturer. It's that good.

I have a S&W. I have a Sig. I've had all sorts of quality handguns over the years. My Taurus is the best of the bunch hands down. It really isn't even close. The Sig is a great gun but it's had problems admittedly after a lot of rounds went through the gun. But even at first I had issues with it and it's supposed to be one of the most reliable Sigs ever built. It's the "Made In W. Germany" model P-220. If you know Sigs you'll know that's a highly sought after gun. It's a great gun in many ways but for concealed carry the Taurus has it beat. It's just as accurate, it's just as reliable if not moreso, it's lighter and that's true even though the Taurus holds 3 more rounds at a time. The Taurus has a better trigger and it has a thumb safety. I choose to carry the Taurus everyday. That should say something.

I understand some people have had bad experiences with Taurus. I've seen photos of them that were proof that Taurus released some trash guns. But that is not true of the PT-145. It isn't even close to being true. I also had a Tokarev that I carried for years. Lots of people see that as a great concealed carry gun. It shoots a hot round and is reliable as all get out. I've shots 1911's but they aren't great concealed carry guns because they are too heavy and don't carry enough rounds in .45 ACP (my favorite choice for SD). I certainly can't carry my 629 in a IWB holster. I do it all the time with the Taurus. I know there are excellent S&W concealed carry weapons. But they all have their problems not the least of which is the chance your cylinder will slip back a notch or just get out of time. People say wheel guns are the best. I don't think so. Automatics (semi-autos for the word purists) are a better choice and the best I can tell the Taurus is the best. Don't even get me started on the problems with Glocks. I'll take my Taurus over all of them any day. It has the perfect set of features and it works everytime I pull the bang switch. What more can you ask for?
 
I once tried a Taurus 85 and the cylinder started to bind before I shot the fifth round in the cylinder. The gun started out clean and it appeared the cylinder gap was way too tight. Or the gun was just too loose. Or both.

As for Glock, my 21 is the only semiauto that I would ever choose to carry. It's so good that I actually bought a second one. If you keep a Glock in factory configuration and shoot factory jacketed ammo, you will rarely have any kind of problem. You encounter problems when you start swapping out parts and shooting questionable handloads, and I know I have been guilty of all of the above. But that Taurus would choke immediately even with factory loads.

Dave Sinko
 
Actually Glock has had some infamous problems with some of their guns too. Nobody makes perfect guns all the time. I actually intended to buy a Glock when I bought my Taurus though. But I never found any Glock that came close to matching the features of the Taurus even at twice the price. I had the money to buy a Glock. I just chose to buy a Taurus instead and I've never regretted that decision for a second.
 
Neither proud nor ashamed :) I have a Taurus 605SSCH that I bought for a nightstand pistol back around 1980 when I was still in college with a wife, baby, and mortgage. It shoots maybe a box of full-house 357s each year for a checkup. It has never so much as hiccuped. Granted, it isn't a Smith but I would bet my life on it if I had to. I would however trade it for a model 60 in a heartbeat.
 
You can get a bad gun from ANY brand. I had a Colt 1911 that I could never get to feed. I had a PC Smith that I had to take to a gunsmith to get it to fire a full cylinder. I have a Dan Wesson 1911 that has to have Meggar mags to feed correctly. I had a P345 Ruger that shot so far to the left I gave up on it. My dad had a Iver Johnson Sidewinder that was so far out of time it was dangerous. My shooting buddy handed me a Gold Cup that launched its front sight on the third shot. He has a High Standard Citation that won't feed. You get my point.

My CCW is a Taurus PT-145 and has been for 6 years. It holds 10 rounds of 45 ACP and I practise with it weekly. I also have a PT 1911 that is every bit the gun that my Kimber, Colt, and Dan Wesson is. Another range buddy has a Taurus stainless steel 357 revolver that is very close in size and function to my 19-3. Actually it has a forcing cone that is a bit beefier than that on the 19. It will probably last longer than my 19.

Taurus is producing some very fine firearms. They certainly are not on par with with pre-lock Smiths or Colt revolvers but in a day when you have to put out $450 for a used 28 or $1200 for a used Python...........Well I will leave the pretty ones in my safe and take my "Junk" Taurus guns to the range and try to wear them out.
 
Back
Top