Which Remora holster for M&P Shield?

[RM38spl]

I have the Remora 6ART with sweatshield, not the full sweatshield. I have not had a problem drawing from the remora at all, I wear it with a belt or no belt, but I don't wear real loose clothing either. The Remora is comfortable and very concealable. I trade off the the N82 pro, very comfortable, but I think a little thick.

 

[zotzer]

The issue with the 6ART for the Shield is the opposite. It is too deep. But yes, the hair dryer/freezer method works great for stretching!

 

[Dino1]

The one I pictured is the 3B with the reinforced top and right side sweat shield. Once heated and fitted it should fit well, I have several of their holsters. I bought it for my Kahr MK40, I purchased the pistol because I cold not get my hands on a 40 Shield for a decent price, then I found one locally for 429.00, before the Kahr even arrived, dumb luck. So now I have two more 40's added to the stable. Both shoot well, you would not belive how accuate the Kahr is for such a small pistol, it is about the size of an LCP in .40, you would think it would not be very accurate and kick like a mule. Not the case, it is all stainless, hefty weight at 25oz empty, and more tame than you might think.

 

[catcus-jack]

Catcus
I am always open to try a better holster.

If a person pocket conceals what holster would you recommend?

Thanks

Russ

Kramer,Milt Sparks,or Ken Null to name a few.Its just my opinion but fabric holsters are not for me.

 

[Dino1]

Kramer,Milt Sparks,or Ken Null to name a few.Its just my opinion but fabric holsters are not for me.

You have never worn a Remora then, you can barely tell its their after wearing it a few minutes. Placement is never an issue either. Cant it, place it werever you want. How deep do you like your firearm to ride? you can do whatever you want with one of them. Try one out, they are cost effective as well.
Love my Remora holsters.

 

[zotzer]

Thanks, Dino! I don't like being able to peek at that trigger though. Sounds like maybe the 4 could work. It's weird, Remora emailed me last week, asked me to call so they could solve the 6ART problem, and now I can't reach them. The phone answers, but no one on the other end, and no email response. Bizarre, as this is not typical for them at all!

 

[nickel plate]

Call Mike @ Remora and ask about a holster made specifically for the M&P Shield. There is a thread going over at Defensive Carry about a guy who was not happy with the 6ART; he called Remora and they custom made him one that works perfectly for the Shield. I'm hoping to get one too.

Ransom,
I'm having computer problems, every time I get to that specific Defensive Carry Remora/Shield thread my computer pops an error message and shuts down time and time again. Can you please post the important topic highlights that have been discussed over there? Thanks.

 

[nickel plate]

Thanks, Dino! I don't like being able to peek at that trigger though. Sounds like maybe the 4 could work. It's weird, Remora emailed me last week, asked me to call so they could solve the 6ART problem, and now I can't reach them. The phone answers, but no one on the other end, and no email response. Bizarre, as this is not typical for them at all!

zotzer,
I got through yesterday, a lady answered the phone, I asked to speak with Mike, She put me on hold, came back on and said he was with a customer and asked if I wanted his voice mail. Instead I requseted his personal e-mail address and received it and sent him an e-mail re:information on the latest Remora holster design for the M&P Shield. I checked my e-mail this a.m. and nothing yet-that's o.k. at this point.
The Remora website states that they take phone calls 9am-2pm (Florida time) mon through fri.

 

[Ransom]

Ransom,
I'm having computer problems, every time I get to that specific Defensive Carry Remora/Shield thread my computer pops an error message and shuts down time and time again. Can you please post the important topic highlights that have been discussed over there? Thanks.

The OP of that thread kept finding his mag released due to the holster laying right on the release button. He had the reinforced model, but not sure that was causing it. So he called Remora and Mike offered to make him a custom holster just for the Shield. He posted pictures that show how it does not cover the mag release, and as a bonus it covers the slide all the way to the back on the side facing the wearer. I was really interested in the same holster because of how it covered the slide--my 6ART allows the back corner of the slide and the rear sights to poke me in the side sometimes. Try to take a look on Defensive Carry thread because he posted some great photos over there.

 

[zotzer]

Great....I will just stay tuned here then. Between the two of us, we can figure out what's the right option. Thanks!

 

[catcus-jack]

You have never worn a Remora then, you can barely tell its their after wearing it a few minutes. Placement is never an issue either. Cant it, place it werever you want. How deep do you like your firearm to ride? you can do whatever you want with one of them. Try one out, they are cost effective as well.
Love my Remora holsters.

I really couldn't stand to see one of my pistols in a fabric holster of any kind.

 

[checkmyswag]

Super grippy "fabric" on the outside. Leather inside optional?

Also probably most of our guns are plastic anyway, why do you care if they sit in "fabric" instead of leather. My leather/kydex holster must be a complete abomination then.

 

[Dohmein]

Never heard of Mike but have dealt with Alan for quite a while. I got a few of them sent to me since they were never quite right for my shield and he ended up making it custom for me. This was when the Shield first released. Surprised to see they still are having issues with this fit. Wonder where Alan is? I have several of the extras they sent sitting in my holster drawer, 2 they sent fit the Compact fine *which I use for my 9c*. Hope you all get this nailed down.

 

[hollombj]

Taking my Remora back

Picked up a 6ART for my shield yesterday and am returning it today.I liked the idea of a holster I could use IWB or pockect.However the 6ART is too deep for the shield and you can't get to the safety without partially drawing and when I tried it in my pocket the holster came more tham half out of the pocket before it released the gun.I will try some other numbers when I take it back and post if I find anything that works.

 

[sirsimon]

I have a Remora for my 4.5" XDm and really love it. I got the ART with sweatshield and have no issues drawing, even with my TFOs, which are quite a bit larger than the stock sights. They seem (from all the reading I did on DefensiveCarry) to have good customer service - I'd absolutely be willing to give them a call if I was unhappy. The holster is super handy and comfortable. I plan on getting another when I pick up a 9c.

 

[nickel plate]

Call Mike @ Remora and ask about a holster made specifically for the M&P Shield. There is a thread going over at Defensive Carry about a guy who was not happy with the 6ART; he called Remora and they custom made him one that works perfectly for the Shield. I'm hoping to get one too.

I've also been it touch with Mike @ Remora and today, he is shipping me the newly designed holster for the Shield. I'll wear it around awhile and post back.

 

[checkmyswag]

Nickel plate...that is what I need. Do you have a model or part #?

 

[FAIR_CHASE]

Shield pictured in the Remora 6ART. Purchased holster 6 months ago and while the Remora has seen little use (EDC is in a Minotaur), it does appear to be a very good fit.

 

[shawn mccarver]

First, let me say I have searched the forum and read what has already been said on the matter.

According to their website, it calls for the 6 ART. What does the ART stand for? I see some people go with the 6, 6 ART and even a #4.

I'm looking to carry on the right hand side and would like a sweat shield.

Photos?

Experience?

Which one is correct for the gun?

Thanks.

I personally would not be interested in trusting my carry gun to a holster that allegedly stays put without anything by friction because the material is "tacky" or whatever.

This type of IWB holster is for people who do not really intend to carry much. No serious person would use one.

I looked into these after "anonymous girl" (she won't show her face or give her name, "falia" maybe) showed them on a video her web site. It might work as a pocket holster, but I would not depend on it for real carry.

If the bulk of a belt loop bothers you on an IWB, then get one of Paul Giannaula's IWB holsters. Try PJ Holster.

 

[JMike]

To each, his own.

I am a pretty serious guy. I have a Remora holster that I use for my Glock 19 and M&P9c.

I can assure you, it does stay put. These holsters are inexpensive and extremely comfortable for IWB carry.

There are other videos reviews on youtube from other people that will say the same thing.

YMMV.

I personally would not be interested in trusting my carry gun to a holster that allegedly stays put without anything by friction because the material is "tacky" or whatever.

This type of IWB holster is for people who do not really intend to carry much. No serious person would use one.

I looked into these after "anonymous girl" (she won't show her face or give her name, "falia" maybe) showed them on a video her web site. It might work as a pocket holster, but I would not depend on it for real carry.

If the bulk of a belt loop bothers you on an IWB, then get one of Paul Giannaula's IWB holsters. Try PJ Holster.