M&P 15-22 Picture Thread

Thanks for the comments guys, but I like it just how it is. I know the cantilever may be backwards, but since I don't have a magnifier and the performance isn't degraded, I'm not bothered. And the same with the front sight, nothing has degraded, and I think it just looks better this way.
I've decided on the shoe goo, I'll show my finished project this weekend.
 
I've been lurking for a while but I finally picked up a threaded version last week off gunbroker as I've given up waiting for the MOE one. It's my first rifle/gun I've ever owned and I already can't help myself slapping on gear on this platform. Planning on adding a Primary Arms M4 red dot next, but I think I'll learn how to shoot w/ the irons for a bit first.

P1020012.jpg
 
I'm finally done.... HA! here's mine. Magpul MIAD Grips, XTM rail covers on the sides with ladders up top and bottom, an AFG and and MOE Stock.
Optics:
Primary Arms M4, deluxe 3x magnifier with the flip to side mount, with MBUS 1/3 co-witness of course.

JP yellow trigger spring kit as well

DSC04293.jpg
[/IMG]
 
Here's my new 15-22...

Hogue grip
J-P yellow spring kit
275 lumen light/laser combo
UTG tactical bipod
5 point forehand grip
Mark III 3-9x40 tactical scope
Blackhawk 2-point sling
 

Attachments

  • 2011-05-17_15-26-15_389.jpg
    2011-05-17_15-26-15_389.jpg
    44.6 KB · Views: 282
My contribution to the 15-22 nation

FAB tactical vertical grip
Surefire G2 flashlight
Barska 3-9x42 IR contour scope

More to come...
guns001.jpg

guns003.jpg

guns004.jpg

guns009.jpg
 
Last edited:
Some 15-22 Porn for You

I think I'm done with my low cost loadout. Got her new eyes all sighted in at the range today, and she asked for a photoshoot while she was still hot.

IMG_9388.jpg


IMG_9386.jpg


IMG_9353.jpg


IMG_9375.jpg


IMG_9306.jpg


IMG_9300.jpg


Here's what I added onto her:

DBoys Rail Covers
- LOVE them. They look great, fit great, and make the rifle a lot more grippable for my big hands.

DBoys Carry Handle - Kinda like it. The finish is black paint that chips easily. I really had to jam the scope in, and if I try hard I can still get it to wiggle. If I did it again, I would probably try a different handle (I might still).

NC Star 4x22 scope with carry handle mount - Like it a lot. It's very sharp and clear, the mil spec recticle is great, the eye relief is good, and the build is solid. I really had to jam it into the handle, but I'll bet it's the cheap handle that is the culprit. I like it on top of the handle, my eye seems to reach there naturally. The mount is see through, so you can still use the irons. And you can't beat the price!

Tapco orange front sight post - Like it a lot. Gives improved visibility against black targets

Hogue Grip - Love it. Super comfortable. Fills my big hands better than the stock grip. My only issue is that is doesn't have a hole for the takedown pin spring, so it doesn't fit like factory, and the pin will start to work itself out after a few hundred rounds. I think I just need to disassemble it and seat it better. The grip is fantastic, though!
 
Last edited:
Custom Paint Subdued style

I couldnt wait to get my magpul stuff in. I had to do something and didnt really like the desert tan that I always see. I wear a subdued uniform for work so I did the same with my glock and my M&P. Ill post more as I clean up my little imperfections and add more to the weapon.
 

Attachments

  • M&P glock 1.jpg
    M&P glock 1.jpg
    77.9 KB · Views: 152
  • M&P 1.jpg
    M&P 1.jpg
    61.4 KB · Views: 150
  • M&P2.jpg
    M&P2.jpg
    62.9 KB · Views: 302
They are plastic. They behave just like the factory sight, except more visible in low light or against darker targets. I also bought a cheap front sight tool from Amazon which made changing them out really easy.
 
They are plastic. They behave just like the factory sight, except more visible in low light or against darker targets. I also bought a cheap front sight tool from Amazon which made changing them out really easy.

Cool thanks for the info. DO you have a link to the front sight tool?

Thanks
 
Ok here is mine. Thanks to beltfed it is completed (for now). I also had a buddy of mine customize my rail cover.IMG_0407.jpg

IMG_0405.jpg
 
P1020018.jpg


I think I'm finished with my range setup:

-Dboys Armored RIS Rail Covers
-Primary Arms M4 Red Dot
-UTG Low Profile Metal Vertical Grip
-Magpul MOE Pistol Grip
-Magpul MOE Stock
-Magpul PTS MBUS Sights ($8 from AliExpress)
-Tacticrayon

Might do a barrel shroud in the future, but maybe after I start collecting tools for my full AR15 build. This rifle is punishing for my wallet (first gun)
 
Back
Top