OP
Reddog
Absent Comrade
Thank you, My29!
It's been a long process!
Dick
It's been a long process!
Dick
Chopped 27-2
- Thread starter Reddog
- Start date
OP
Reddog
Absent Comrade
2400 powder
My29,
I do load the 358429 Keith bullet with 9.3 gr. 2400. It shoots well in my other N frames in .38 Special. I have another load, 12.0 gr. 2400 with a 200 gr. 358430 Lyman round nose, in .357. I did shoot some of the 200 gr. in this gun, but wasn't too pleased with it. It's a real thumper! Don't have any saved targets but will, soon.
Dick
My29,
I do load the 358429 Keith bullet with 9.3 gr. 2400. It shoots well in my other N frames in .38 Special. I have another load, 12.0 gr. 2400 with a 200 gr. 358430 Lyman round nose, in .357. I did shoot some of the 200 gr. in this gun, but wasn't too pleased with it. It's a real thumper! Don't have any saved targets but will, soon.
Dick
Attachments
faif2d
Member
Glad to see that you ended up with a fine shooting Smith. Those targets look good to me. I remember your wad cutter loads and that was a fine shooting round. I know that you will find a better load than this but that is half the fun isn't it.
OP
Reddog
Absent Comrade
Thank you, Steve!
I've got a new wadcutter mold that is proving to be much better!
How've you been?
Dick
I've got a new wadcutter mold that is proving to be much better!
How've you been?
Dick
OP
Reddog
Absent Comrade
I still haven't been able to bring this gun up to the accuracy of my 6" 28s? I'll just keep trying different loads and bullets, I guess? Kind of odd, since it shot so well until I started the work on it. I may have to take a fellow member up on his offer to work on the trigger!
Are you shooting double-action? If you are shooting single-action and you can dry-fire the gun, watch your sights, and everything looks good - don't let anyone mess with the trigger. I'd bet that the trigger is not the issue.
How about your barrel - nice and clean? Exit bores of the cylinder nice and clean?
I have never had the best luck with the 358429 bullet. If your brass is in good shape, and you are getting good uniform crimps, it should do OK, but I have always liked the 358156 bullet better - particularly with a big charge of 2400. No powder-puff stuff!
It's obvious the gun will shoot since we see that S&W sent you the one-hole target. "Bad news," as Iggy says.
Get to work on your ammunition and I'd bet sooner or later you will hit on a combination that makes that gun purr.
How about your barrel - nice and clean? Exit bores of the cylinder nice and clean?
I have never had the best luck with the 358429 bullet. If your brass is in good shape, and you are getting good uniform crimps, it should do OK, but I have always liked the 358156 bullet better - particularly with a big charge of 2400. No powder-puff stuff!
It's obvious the gun will shoot since we see that S&W sent you the one-hole target. "Bad news," as Iggy says.
Get to work on your ammunition and I'd bet sooner or later you will hit on a combination that makes that gun purr.
OP
Reddog
Absent Comrade
Joel,
I shoot both single and double action, mostly single. And I do keep my guns clean. As to the 358429, it's always been good in anything I've tried it in. And, I did use 358156 for several years but it made a small, ragged hole on target, so I got rid of it. That's what I think might have been used on the target the factory sent? Those holes are very small. Also, did he fire it at 5 yards, 10 yards or? I wish they had sent more info with that target.
I think I will work with Unique for a while. I use 2400 in .38 Special and have had good luck with it. But it's a little too heavy (hot) for target. My favorites for all round use are semi-wads, so I think I'll stick to them for a while yet.
Dick
I shoot both single and double action, mostly single. And I do keep my guns clean. As to the 358429, it's always been good in anything I've tried it in. And, I did use 358156 for several years but it made a small, ragged hole on target, so I got rid of it. That's what I think might have been used on the target the factory sent? Those holes are very small. Also, did he fire it at 5 yards, 10 yards or? I wish they had sent more info with that target.
I think I will work with Unique for a while. I use 2400 in .38 Special and have had good luck with it. But it's a little too heavy (hot) for target. My favorites for all round use are semi-wads, so I think I'll stick to them for a while yet.
Dick
Last edited:
OP
Reddog
Absent Comrade
More testing of the 5" 27-2!
Today we had 83° and winds over 45 mph! Probably not a good day to shoot but it was plesant back in the shelterbelt. I took the 5" 27 and lots of shells and really rung it out, looking for that elusive accuracy! I shot 25 rounds of two different loads. 153 gr. Saeco cast Wadcutter with 2.8 gr. Clays and Win WSP primers. That's the powder charge I used for years for informal Bullseye shooting. I figured that if that wouldn't shoot in this gun, nothing would! Then, I finished it off with 25 rounds of the load I've been using so much of lately: 153 gr. RCBS cast semi-wad, 3.7 gr. of 700X and Win. WSP primers. Surprisingly, this bullet outshot the full wadcutter! I feel better about it now. Considering the fact that the trigger pull went from 2.5 to 4 pounds with the overhaul and the wind today, and the fact that my eyes are not as good as they used to be, it did pretty well! I'll try some heavy loads of Unique and 2400 in the next few days, even though I wont use them often, just to see how they do.
Dick
Today we had 83° and winds over 45 mph! Probably not a good day to shoot but it was plesant back in the shelterbelt. I took the 5" 27 and lots of shells and really rung it out, looking for that elusive accuracy! I shot 25 rounds of two different loads. 153 gr. Saeco cast Wadcutter with 2.8 gr. Clays and Win WSP primers. That's the powder charge I used for years for informal Bullseye shooting. I figured that if that wouldn't shoot in this gun, nothing would! Then, I finished it off with 25 rounds of the load I've been using so much of lately: 153 gr. RCBS cast semi-wad, 3.7 gr. of 700X and Win. WSP primers. Surprisingly, this bullet outshot the full wadcutter! I feel better about it now. Considering the fact that the trigger pull went from 2.5 to 4 pounds with the overhaul and the wind today, and the fact that my eyes are not as good as they used to be, it did pretty well! I'll try some heavy loads of Unique and 2400 in the next few days, even though I wont use them often, just to see how they do.
Dick
Attachments
Last edited:
OP
Reddog
Absent Comrade
I just sent the cylinder off by Priority Mail to the factory to be re-blued!
Dick
Dick
Aircrewman
Member
Hey Reddog!
Well, I have just read this entire thread, all thirteen pages..., and just saw that you are still working on this project! I can only say: fantastic!! What a project. What is it, 6-8 months? And did it ever seem like it was going to end? However, it did and those groups are fabulous, and I might add, proof that the project, in the long run, was really worth the time and trials. Your Model 27 is just a cool looking, shooting machine.
I realize the agony you had over the time/effort/money put into this project BUT, look what it did for you! It seems like it gave you something to do, something to work on, making time to shoot the gun, working your loads up, looking forward to getting your gun back after sending it off, shooting it again and again while looking for the gun to perform like you knew it could!! Which it does! I say: I wish that I had such a project to keep me as interested as you evidently have been. You have given me inspiration to get back to doing the things that I have put off for the last 8 years while I searched for "something worthwhile." Thanks for that. I may now look for a "project gun" or just get out and shoot the ones that I have. I used to shoot alot but over the last several years thought that I should be doing something else and that was not correct... I will now. Thanks for sharing all of the things you have done with this project.
Well, I have just read this entire thread, all thirteen pages..., and just saw that you are still working on this project! I can only say: fantastic!! What a project. What is it, 6-8 months? And did it ever seem like it was going to end? However, it did and those groups are fabulous, and I might add, proof that the project, in the long run, was really worth the time and trials. Your Model 27 is just a cool looking, shooting machine.
I realize the agony you had over the time/effort/money put into this project BUT, look what it did for you! It seems like it gave you something to do, something to work on, making time to shoot the gun, working your loads up, looking forward to getting your gun back after sending it off, shooting it again and again while looking for the gun to perform like you knew it could!! Which it does! I say: I wish that I had such a project to keep me as interested as you evidently have been. You have given me inspiration to get back to doing the things that I have put off for the last 8 years while I searched for "something worthwhile." Thanks for that. I may now look for a "project gun" or just get out and shoot the ones that I have. I used to shoot alot but over the last several years thought that I should be doing something else and that was not correct... I will now. Thanks for sharing all of the things you have done with this project.
OP
Reddog
Absent Comrade
Well, AC,
I hope this does inspire you to shoot more, especially if you reload! But, be careful you don't get sucked into the buying trap like I did. These big Smiths inspired me to the point that I've bought well over a dozen in the last year! Eight of the Model 28, alone! But, there are worse ways to go!
Dick
I hope this does inspire you to shoot more, especially if you reload! But, be careful you don't get sucked into the buying trap like I did. These big Smiths inspired me to the point that I've bought well over a dozen in the last year! Eight of the Model 28, alone! But, there are worse ways to go!
Dick
Art Doc
SWCA Member, Absent Comrade
"A job making negative comments? Why?"
Because somebody has to do it. There's nothing more boring and useless than a group of "yes-men" who offer no dissenting opinions on anything. The nature of discourse is to have varying points of view.
This project has turned into quite the epic saga. Sorry. I know that you already have far more time, money and effort in this than you wanted to invest. This is a good example of why I avoid "project guns" like the plague. I learned my lesson the hard way several times over. Maybe one time in 10 projects turn out to be a good idea. Maybe one in 10...
Hopefully you finally bring this one to an end and be happy with the results.
Because somebody has to do it. There's nothing more boring and useless than a group of "yes-men" who offer no dissenting opinions on anything. The nature of discourse is to have varying points of view.
This project has turned into quite the epic saga. Sorry. I know that you already have far more time, money and effort in this than you wanted to invest. This is a good example of why I avoid "project guns" like the plague. I learned my lesson the hard way several times over. Maybe one time in 10 projects turn out to be a good idea. Maybe one in 10...
Hopefully you finally bring this one to an end and be happy with the results.
OP
Reddog
Absent Comrade
OP
Reddog
Absent Comrade
I received my newly blued cylinder back from S&W, today, took it outside for a couple pictures in the sun and my camera battery was dead! I'll try to get them posted, tomorrow! It really shines!
Dick
Dick
OP
Reddog
Absent Comrade
73° and light breese 0n the range today!
Today, I took the 5" chopped Mod. 27 to the range and broke in the newly blued cylinder! It's pretty! I fired 15 rounds of 172 gr. Keith bullet, Lyman # 358429 with 12.0 grains of Alliant 2400 powder. It's a little heavy for everyday use, but man it's accurate in this gun! This is a .357 Magnum load! I put the first 12 rounds inside the 10 ring, the 13th cut the top of the 10 ring, then I managed to drop the last two into the 8 & 9 rings! Should have quit while I was ahead of it at #10! I also shot the 6.5" 38/44 Outdoorsman today. I'll get something posted on it tomorrow!
Dick
PS, I had to seat the bullets to 1.590" OAL to get the cylinder to turn freely!
Today, I took the 5" chopped Mod. 27 to the range and broke in the newly blued cylinder! It's pretty! I fired 15 rounds of 172 gr. Keith bullet, Lyman # 358429 with 12.0 grains of Alliant 2400 powder. It's a little heavy for everyday use, but man it's accurate in this gun! This is a .357 Magnum load! I put the first 12 rounds inside the 10 ring, the 13th cut the top of the 10 ring, then I managed to drop the last two into the 8 & 9 rings! Should have quit while I was ahead of it at #10! I also shot the 6.5" 38/44 Outdoorsman today. I'll get something posted on it tomorrow!
Dick
PS, I had to seat the bullets to 1.590" OAL to get the cylinder to turn freely!
Attachments
Last edited:
Project guns are not for everyone! Some folks are just not temperamentally suited. They agonize over every nickel spent, over every day a gun is out of their hands, over whether the tradesman they've hired is capable of doing the work exactly the way they think it should be done, and over what they will do if the gun gets lost in transit... among a million other things.
I've found a lot of the success in restoring/rehabbing a handgun comes from making contacts with knowledgeable people who can do the work required, doing your homework before giving them the job, and then leaving them alone. If you do that, they may not be scared to answer the phone the next time you call, and the prices may be a little better because they are not adding in a nuisance-charge for dealing with you.
But even once you have refined your techniques, a certain admiration for the intended rehab victim is required. If it is just a beaten-up gun to you, you're not the guy for the job. Let them go. But if you have a soft spot in your heart for them, and if you can train yourself to handle the "problems" involved, AND if you really enjoy seeing the completed project, it can work out pretty well. After more than a couple of these projects, and more than a few years of experience, I find I am getting pretty good at it. Heck, the last M29 I decided should be restored to usefulness probably only cost a bit more than I could have bought a perfectly good used one for.
Good job with your project and gun, Dick. You have enjoyed it, and learned a thing or two, and in a small but important way, helped keep our wonderful hobby going a few more days. (But I have to add, I am not quite sure why you want so many M28s...
)
OP
Reddog
Absent Comrade
Thanks for your support, Joel! I really appreciate it! As to the 28s, it's a good place to put some money for when I grow up and start considering retirement! Stocks and bonds sure haven't been any good!
Dick
Attached target is with 10 grains 2400 and 172 gr. Keith bullet in the 5" model 27. I'll probably use more of this than the 12 grain load. It's plenty potent!
This 10 gr. load of 2400 is in .38 special brass. Not recommended for light frames!
Dick
Attached target is with 10 grains 2400 and 172 gr. Keith bullet in the 5" model 27. I'll probably use more of this than the 12 grain load. It's plenty potent!
This 10 gr. load of 2400 is in .38 special brass. Not recommended for light frames!
Attachments
Last edited:
bronco45
Member
Reddog: I use a lot of 2400 with a 158 gr SWCHPGC sized 358. I shoot it in 3 K .357s and 2 L Frames. The load performs well in all the guns but the 66-3 4" likes it the best.
It is my standard load for 357s in K frame guns. GP in Ls and Ns.
Thanks for sticking with the project and seeing such a successful conclusion.
Tom
It is my standard load for 357s in K frame guns. GP in Ls and Ns.
Thanks for sticking with the project and seeing such a successful conclusion.
Tom
OP
Reddog
Absent Comrade
Thanks for the support, Bronco!
It's been a fun ride!
Dick
It's been a fun ride!
Dick
OP
Reddog
Absent Comrade
Loose screws!
Hey Guys!
We had a nice, 73° day yesterday ,so I grabbed the chopped Mod. 27 and headed for the range! I shot a variety of loads and and had a really good time! Wish you could have all been here! Some of you, anyway. I always clean my guns after firing, put a dab of tranny fluid on all the moving parts I can get to easily and wipe all the metal down with spray silicon. Then, I take my special fitted screwdriver and check all the sideplate screws. It seems on this gun that the middle screw, that retains the cylinder, is always loose? I've found some of these screws loose on some of my other guns, from time to time, too. I don't think I want to use Loctite on them. What does everyone else do? I'd hate to lose one!
Dick
Hey Guys!
We had a nice, 73° day yesterday ,so I grabbed the chopped Mod. 27 and headed for the range! I shot a variety of loads and and had a really good time! Wish you could have all been here! Some of you, anyway. I always clean my guns after firing, put a dab of tranny fluid on all the moving parts I can get to easily and wipe all the metal down with spray silicon. Then, I take my special fitted screwdriver and check all the sideplate screws. It seems on this gun that the middle screw, that retains the cylinder, is always loose? I've found some of these screws loose on some of my other guns, from time to time, too. I don't think I want to use Loctite on them. What does everyone else do? I'd hate to lose one!
Dick
Attachments
Similar threads
- Locked
Latest posts
-
-
Juggernaut Tactical Featureless Grip M&P AR-10 Lower- Latest: valkeriesilk
-
How do you actually enjoy a Magnum caliber revolver?- Latest: Palmetto Sharpshooter
-
Anyone Recall Reports of a Stolen .38-44 Outdoorsman?- Latest: Legendarylawman
-
-
-
-
-
-
-
-
-
-
