Modified my stock grip >>>>

[TYSTYX]

Haven't even shot the new gun yet, but knew that the stock grip wasn't going to work. The little finger "bump" just irritated the **** out of my ring finger so it had to go. I removed the grip (thankfully I had come across the youtube video explaining the 2 detent springs).... I cut off the bump with a hacksaw, filed it down smooth, and hit it with 200 grit sand paper. The result is a stock grip I can now live with for a while.

 

[Kayback]

I agree with you completely. I have the A2 style grip. I did exactly the same thing. I purchased a CAA P16 grip to replace it with, but am currently looking at a H&K 416 style grip because it is thinner.

I don't even know the point behind the finger bump.

That was nice work. I whittled mine off with a pocket knife then did some 600 and 1200 grit paper to smooth things out.

KBK

 

[yugowego]

Looks good... I replaced all mine on my ARs cause I cant stand the bump either.

 

[kdhs10]

Nice work.

 

[Locked-N-Loaded]

Funny... I replaced mine with a CAA that has MORE bumps

 

[stimr2]

Looks good I was thinking about doing the same thing to my 15-22. But I got the Mapgul K Grip instead. But your pic just convinced me to do it on the stock grip and put it on my stripped lower.

 

[Kayback]

Funny... I replaced mine with a CAA that has MORE bumps

I did that as well, but the bumps are better placed and make more sense!

KBK

 

[BP_Z28]

looks pretty good! cant tell it ever had one.