jaylind
Member
A Riffle is a short, relatively shallow and coarse-bedded length of stream over which the stream flows at higher velocity and higher turbulence than it normally does in comparison to a pool
M&P 15-22 Picture Thread
- Thread starter TxShooter2k9
- Start date
A Riffle is a short, relatively shallow and coarse-bedded length of stream over which the stream flows at higher velocity and higher turbulence than it normally does in comparison to a pool
A Riffle is a short, relatively shallow and coarse-bedded length of stream over which the stream flows at higher velocity and higher turbulence than it normally does in comparison to a pool
At certain times of the year, that is the best place to find feeding trout!!!
- Joined
- Apr 21, 2013
- Messages
- 4
- Reaction score
- 1
Here's my performance center model. Still waiting on can to clear ATF and FF handguard, but turning out good and very fun to shoot.
roadkill45
Member
- Joined
- Jan 22, 2012
- Messages
- 644
- Reaction score
- 237
Here's my performance center model. Still waiting on can to clear ATF and FF handguard, but turning out good and very fun to shoot.
Actually if you take out the front 'cover' inside the hand rail or bore out the middle of it so it does not touch the barrel it is free floated.
speedyquad
Member
i'll bite...just got it 2 days ago...if i can get to sleep(night shift) i'll get up in a few hours and take it to my range for the first time...
i know i need to eliminate the background on some of these...lol
i know i need to eliminate the background on some of these...lol
My Baby
Bushnell TRS-32
Streamlight TLR-1 HP
Hogue Grip
Magpul MOE Vertical Grip
Blackdog Machine 50 Round Drum Magazine
DIY Maglite Supressor (don't worry, I'm abiding by the law)
EnRoute:
LaRue Index Clips
Magpul MOE MilSpec Stock
a single point sling of some sort
maybe a 3x red dot magnifier
If only I could find ammo....
Bushnell TRS-32
Streamlight TLR-1 HP
Hogue Grip
Magpul MOE Vertical Grip
Blackdog Machine 50 Round Drum Magazine
DIY Maglite Supressor (don't worry, I'm abiding by the law)
EnRoute:
LaRue Index Clips
Magpul MOE MilSpec Stock
a single point sling of some sort
maybe a 3x red dot magnifier
If only I could find ammo....
Attachments
I have the SKB case... first one came with no keys (shops fault) 2nd one it comes to find out my S&W M&P key for the factory firing lock chain thing opens the SKB "security locks".... yeah the key is half the size...finally my contribution.
SKB 3i4214-5bl $160.
foam custom cut with a built hot wire. Cutting Gun Case Foam (lots of photos) - AR15.COM
Now i just gotta get enough goodies to fill this sucker up. only mod is the hogue grip so far.
Dirt Dart
Member
Love mine. Had it for a couple years now.
Original Magpul furniture factory version.
AAC Element can.
XPS2 red dot.
Surefire X300.
I've added an ALG ACT trigger since the photos were taken, raised the EoTech with a LaRue LT110 mount for proper co-witness, added a PT charging handle, and replaced the Magpul stock with a Viltor E-Mod.
Next step will be to SBR it.
Original Magpul furniture factory version.
AAC Element can.
XPS2 red dot.
Surefire X300.
I've added an ALG ACT trigger since the photos were taken, raised the EoTech with a LaRue LT110 mount for proper co-witness, added a PT charging handle, and replaced the Magpul stock with a Viltor E-Mod.
Next step will be to SBR it.
Last edited:
Roc21
Member
jaylind
Member
cjt50
Member
Kayback
Member
As they say. "Finished". Except for the CTR stock I sometimes put on and the RVG that I use in place of the AFG (Wife prefers the RVG, so it'll be going on again soon).
All the toys with it.
Crane stock
416 grip
MBUS
Aimpoint H1 4MOA on La Rue QD
AFG
No name rail ladders
Streamlight PT1-L in a Viking Tactics polymer mount
Homebrew Gopro mount
Optional extras are 25 round mags, cheap Norinco scope in see through rings to get the correct height, Gopro 3, QD (legally) self built suppressor.
All the toys with it.
Crane stock
416 grip
MBUS
Aimpoint H1 4MOA on La Rue QD
AFG
No name rail ladders
Streamlight PT1-L in a Viking Tactics polymer mount
Homebrew Gopro mount
Optional extras are 25 round mags, cheap Norinco scope in see through rings to get the correct height, Gopro 3, QD (legally) self built suppressor.
Roc21
Member
Bought it off ebay, nothing special, but quite sturdy/durable. Strong legs/spring load. Push button release. The legs extend 4" from bottom of grip. Total length from rail attachment to bottom of legs is 9".
Roc21
Member
Since we are asking about your setup
Who's case are you using?
MidwayUSA Pro Series Tactical Rifle Case.. 35", olive drab
MidwayUSA Pro Series Tactical Rifle Case
Kayback
Member
Bah. Showed it to the wife and she said the FDE grip made it look like an Airsoft gun. So I've put the black CAA UPG-16 grip - which ironically was on my Airsoft rifle - on.
KBK
cjt50
Member
Thank you!!
