Bought SD40VE, retuning it for a Glock.

AWA

AWA

Member
Joined
Sep 29, 2012
Messages
26
Reaction score
19
Bought my wife a SD40VE Saturday at the local gun show. We went to the local gun range and shot it today. SO DISAPPOINTED. The gun would fire in a few rounds and then the trigger would not go off. It would pull all the way back to the stop and not release the firing pin. It started this with my wife shooting it. I tried it with out any bullets in it and every few tries it would do the same with me.. IT is going back and I am going to get another Glock!!
 
Register to hide this ad
We really liked the looks and feel of the gun... it just wouldn't fire consistently. Don't want or need a gun I cant trust to go Bang when it is needed. It was going to be her carry gun.
 
Me and my wife both shot it. It has to be a defect in the gun. You can pull the trigger all the way back and it does not always set off the firing pin.
 
Every gun maker can have a lemon, even in a run of very good, very reliable guns. It might be worth your time/money to send it to S&W (they will pay for shipping both ways) and let them fix it. If it runs right, you will save about $200 and have a good gun in the process. For what it's worth, I've owned a number of Glocks, and had a few problems with them...most were fine, but a couple had the BTF issue, for example. Glock's support isn't as good, IMO, as S&W...but, I can go in a local shop and find a Glock armorer, and I can't with S&W.

It's a decision that only you can make. You and/or your wife have to be confident in your firearm, and that is the main criteria...what works for someone else may not work for you, and vice versa.

Good luck!

Edited to ask: did you clean the gun before you took it to the range?
 
Last edited:
GKC said:
Edited to ask: did you clean the gun before you took it to the range?
Click to expand...

I have always wondered about this question, and now is the time to ask, I think. The gun was manufactured, evaluated, and test fired, successfully. Evidence of the successful test fire is in the box. Why would one need to clean a firearm after it was fired once or twice to insure that it would fire again?
 
Muss Muggins said:
I have always wondered about this question, and now is the time to ask, I think. The gun was manufactured, evaluated, and test fired, successfully. Evidence of the successful test fire is in the box. Why would one need to clean a firearm after it was fired once or twice to insure that it would fire again?
Click to expand...

Guns are normally shipped in a preservative which is different than a gun oil. Often it will state in the manual to clean and oil it prior to use. I realize the manual is usually only read as a last resort. :(
 
Gun was cleaned before it went to the range. It would NOT FIRE randomly throught out a clip of ammo. Not always the third shot or fourth, but sometimes two or three times in a row. You could let off of the trigger and it would fire the second pull. Let me ask something. Would anyone let there Spouse carry a gun that will not fire anytime the trigger is pulled to protect themselves and your children.. I believe I will get a big "NO" as the answer from everyone. We liked the gun BUT. I WILL NOT HAVE OR KEEP A GUN THAT JAMS MISSFIRES OR WILL NOTFIRE EVERYTIME THE TRIGGER IS PULLED. That is suicide!! I LOVE my Smith revolver, but am going to go with a Glock for Autos.
 
Last edited:
Muss Muggins said:
I have always wondered about this question, and now is the time to ask, I think. The gun was manufactured, evaluated, and test fired, successfully. Evidence of the successful test fire is in the box. Why would one need to clean a firearm after it was fired once or twice to insure that it would fire again?
Click to expand...

As has been mentioned, the prep from the factory does not include a complete clean. In fact, I called S&W once and asked why the gun appeared to be dirty if it was new...why didn't they clean it? I was told that the gun was test fired in its assembled configuration, and if they disassembled it to clean it, they'd have to test fire it again after assembly to certify that it worked when assembled. (Sounds like a bit of bushwa to me, but that's the answer I got.)

I have seen a fair number of guns with oily residue, shavings, coffee mugs, and other debris from the manufacturing process in the firing pin/striker channel...which can lead to misfires. Oil or other preservatives can work its way into the fire control group and magazines, especially on imported guns.

I've always cleaned and lubed a gun before initial firing (although all I do with revolvers is check the chambers and barrel, and swab them out if needed.)
 
AWA said:
It would NOT FIRE randomly throught out a clip of ammo.
Click to expand...

Well, there's your problem...these guns do not use clips. Try magazines instead. :D



AWA said:
Would anyone let there Spouse carry a gun that will not fire anytime the trigger is pulled to protect themselves and your children.. I believe I will get a big "NO" as the answer from everyone.
Click to expand...

No...but I would also have the manufacturer check the gun to see if it needed repair, especially if it was a gun that was reputed to be generally very reliable, and if the manufacturer had a general reputation for good customer service. If after the manufacturer checked the gun and it still didn't work reliably, then I would get rid of it. Despite their reputation, Glocks are not perfect...read Glock Talk, and you'll see.

The thing is, no matter what brand you buy, there is a chance than an individual gun will have a problem. That is true for cars, boats, TVs, refrigerators, or any other machine that you can buy.

At the end of the day, though, it is your decision...do what makes you feel good and secure. :)
 
If that would have happened with my SD9VE I would have sent it back to S&W to give them a chance to fix it. If they wouldn't/couldn't fix it I would have got rid of it too and got me a SIG SP2022. It's less than a Glock, got the DA/SA trigger and the "To Hell And Back" reliability. If you shop around you can get the TacPac for the price of a Glock and will have the gun, spare mag, holster, mag-loader and a light/laser in the case.
IMHO that's the second best deal right after the SDVE.
 
AWA said:
Gun was cleaned before it went to the range. It would NOT FIRE randomly throught out a clip of ammo. Not always the third shot or fourth, but sometimes two or three times in a row. You could let off of the trigger and it would fire the second pull. Let me ask something. Would anyone let there Spouse carry a gun that will not fire anytime the trigger is pulled to protect themselves and your children.. I believe I will get a big "NO" as the answer from everyone. We liked the gun BUT. I WILL NOT HAVE OR KEEP A GUN THAT JAMS MISSFIRES OR WILL NOTFIRE EVERYTIME THE TRIGGER IS PULLED. That is suicide!! I LOVE my Smith revolver, but am going to go with a Glock for Autos.
Click to expand...
I don't think anyone suggested you should depend on a firearm you are not confident in.
You did not say the gun was new ? Was it ?
If you can take it back , I have never heard of that , at this point I think you should & get one you are confident in.
 
If you are not comfortable with that tool, send it back.
When you think Mediaware is better than it is probably better for you.
I have send Guns back for less and only I didn't like how its feels in my hand.

So don't worry. Send it back and forget about it.
 
The one thing I've learned over the years is that once you've lost confidence in a machine, be it a car, a gun, a bike, or a can opener, you never get it back. No matter what happens, in the back of your mind, you'll be waiting for it to fail.

Replace it. If a Glock serves your needs better, by all means, make it a Glock. Its a shame it turned out that way. Most of the SDs I've heard of are excellent. But there are always those in which the tolerances are ALL off. Those are useless.

Good luck, Glocks can be great guns. I hope you find a good one.
 
You must log in or register to reply here.

Similar threads

Terry G
M&P 2.0 .45 Compact
Replies
5
Views
624
jack zeller
J
M
New trigger issue
Replies
10
Views
449
MattinSC
MattinSC
EL_GATO
Bodyguard 2 trigger question
Replies
14
Views
569
halfmoonclip
H
D
S&W 6906, Glocks and P320's for Carry
2
Replies
26
Views
1K
WRscott
W
lunger
Possible Bodyguard 2.0 Problem
Replies
6
Views
569
lunger
lunger

Latest posts

Back
Top