Need some help .32 HE

[Brush2000]

Hello Friends, I recently purchased this project gun not knowing what exactly it was for $225 as pictured. I plan to take some much finer grit sand paper to it maybe polishing wheel then try cold bluing.

I'd like to know what to call it
And what grips to purchase
Lock up is tight no shake or cracks I fired 12 rounds with j frame grips with a surprisingly tight group of 3in at 15 FT.

SN 162035
On all parts
Barrel marked 32 long CTG

 

[Wiregrassguy]

I'd like to know what to call it
And what grips to purchase

It's a .32 Hand Ejector made around 1913 on the small I frame. It would have shipped with black hard rubber grips. J frame grips that totally enclose the grip frame will work.

 

[Brush2000]

It's a .32 Hand Ejector made around 1913 on the small I frame. It would have shipped with black hard rubber grips. J frame grips that totally enclose the grip frame will work.

Thank you for the wisdom ! Much appreciated

 

[smith17]

After you finish, show us some pics and I can send you a pair of I frame stocks for it.
Ed

 

[Brush2000]

After you finish, show us some pics and I can send you a pair of I frame stocks for it.
Ed

I would sincerely appreciate that I will post progress pictures as it's made!

 

[SS336]

Follow "shotguncoach" on the forum. He has some great posts on refinishing S&W's.
Looking forward to seeing your progress.

 

[Brush2000]

I was doing a little dry firing after cleaning out all the gunk on inside of the frame and my firing pin tip snapped right off enough to not engage the primer any know if a j pin will work on the I frame hammer