Recent content by kauphycup

Like to look at 123 Colt, pics inop.

Take Alessi CQCs Right hand for Sig 220 / 226

In Florida you can also carry MACE (the good stuff) which gives you separation not afforded by a "billy" or what we used to call a "slap stick". Having been there with both instruments, I would prefer the MACE to the "slapper" even though a blow to the shin, thigh or kneecap will stop most...

I liked my Hsc but did some trading and ended up with a HK4. The same designer of the Mauser Hsc also credited as the primary designer of HK's first pistol the HK4. This is my HK4

Bdgreen has it right, Curosity got the best of me so I did the same thing and this is the result. It is BRA.... and you can read the rest for yourself.

Sign on the door of Chappell Bank in Texas

As a former collector of antiques and having worked in an antique shop part time to satisfy my fetish, the best thing, and what we used to remove surface "crud" without harming the patina, was GOJO hand cleaner and a cloth. For more embedded "crud" fine steel wool. Use the Original Formula...

What is sauce for the 2" barrel isn't necessarily sauce for a 4", 6", 18" or 20" barrel. The "muzzle flash" is powder that was expelled and not used to push the bullet down the barrel. The .357 round can be and is by some manufactures and hand loaders, optomized for the barrel length to give...

The fairest method is "F.I.F.O."

If you are in Florida you must notify Division of Licensing via an on line change of address. Information About Renewing Your License- Weapons - Division of Licensing, FDACS

Better also check with your employer. A lot of businesses would prohibit an employee from carrying without first having it run through their insurance company. Unfortunately there is a great big liability issue they may not want to bite off. It's also a chance if anything goes wrong you would...

Check with Snakeman32 on this site, he ran into a 681 a while back that had been drilled and tapped for a scope. This is a link to their discussion http://smith-wessonforum.com/s-w-revolvers-1980-present/93274-681-front-site-filed-down.html Aimtech also makes a mount the uses the side plate ...

Alex Seidel was one of if not the primary designer of the Mauser HSC and was also credited as the primary designer of HK's first pistol the HK4. If you look at them both it's easy to see the comparison. I currently own a HK4 and have shot both in 7.65 (.32) with ball and through many rounds...