Search results

Got this one Last Year around Christmas 2021 :D

Here's the recoil spring assembly

The CDNN slide will fit the 3.1" M1.0 frame = On eBay Currently for $56... The recoil spring & barrel are different, but all other internals are the same = striker assembly, extractor, striker safety plunger & their springs + sights These early M2.0 slides will fit/function on M1.0 & Plus frames...

M&P Sights are always SUPER TIGHT Front & Rear They are NOT fit with a stone or file just pressed into the slots & Loctite on the threaded screw at the rear My Local Gun Shop lets me use their sight pusher at the shop

Last phone call to SAW got me a few FREE goodies & they are always super nice when you tell them " I have six M&Ps" :D

If you call S&W with your serial # & tell them your RSA is coming apart they will send you a NEW ONE FREE Doubt they will be open till after the New Year BUT you never know without calling

The triggers in the 1.0 & 2.0 are similar but different side by side The difference I could see was the hinged area at the bottom That 10-degree bevel on the striker is the main difference Performance Center Shields/Plusses have lighter weight trigger return springs + sear spring & striker...

I never saw the need to replace the recoil spring with anything but a factory unit, call S&W & they will send you a new one FREE M1.0 & M2.0 recoil springs are the same 9mm & 40 S&W Shield Plus recoil springs are a different rating, springs are green on the 1.0 & 2.0 & red on the Plus JFYI Best...

The M2.0 has a different trigger overtravel stop behind the trigger that the M1.0 does not have The M2.0 also has a 10 degree angle on the end of the striker that the M1.0 doesn't have You can up-grade the triggers on both to the flat Plus Trigger but they work best on the M2.0 because of the...

Which one can you see the best?

I too have had one of my magazine extensions split in half & CA Glued it back together Need to call S&W soon...

I'll Take the Raw Dog OWB Holster for $30 Shipped for M&P Shields PM Inbound & Thank You! Looks like a Great Holster Gary/Hk

Did your Equalizer come with three 10 round magazines in New Jersey or only one? Had to ask... Most come with one 10, one 13 & one 15 round I still haven't gone by the LGS & looked for an Equalizer YET! The EQ is an EZ Plus IMO

You should get at least two 10-round magazines That is almost getting robbed by $35-$40

My SD9 FDE is a sweet pistol for sure & only thing I added was the Apex Trigger Kit & Springs + an extra magazine :D

They are OUT OF STOCK Now!! @ Gunmag Warehouse on the 15-Round Magazine JFYI Just Checked Gary/Hk

There has been a problem for a while with the 380 EZs magazine springs being too weak to bring the last round up causing a malfunction I have one & want to call S&W & ask for a couple NEW magazine springs IIRC the newer spring has the yellow paint & is slightly stiffer or longer

I prefer the flat faced Plus triggers, so I put one in both my early Shields too.. Not sure if the triggers will fit in a 45acp Shield or not?? They do work in the 40 S&W JFYI It's possible the trigger shoes could be swapped but unsure as I never had a 45 Shield & only one friend USED TOO have...

I understand Why!! :D

My 3rd & 4th Shields have night sights I have seen a few threads about the front yellow sights being dead Sounds like a bad batch of sights Now for you to order a M*CARBO Spring Kit before the pistol even gets here