10mm/power pistol???

[m657]

anybody loading this for pins, using 180 LFP (coated) & 165 plated near 1100 fps?

got some accuracy recipes with this or Longshot for pins?

 

[colt_saa]

Loading that light, can we presume you plan on using a 610?

Just use the data for the 40S&W cartridge.

 

[dswancutt]

I ran per the Lyman Cast manual, 7 grns of Power pistol which should give you around 1173 fps or so. My favorite was the 38-40 bullet, which was deadly on pins. I ran both a 610 and a 1006

 

[Bob R]

I don't use 10mm/PP for pins but I load up 8gr of PP under a 180gr XTP for use in my Delta Elite and I get right at 1250 fps using a Schuemann AET barrel.

For pins I use a 25-5.

bob

 

[m657]

Thanks for the recipes;

My 625-8 is long gone, #2 son couldn't live without it....

Using 3~9/16" 610 and Sig 220-10 as back up.

Looking to do a little Pin-Butt kick. Don't need a ton of down range ballistics...."just enough"...........