22/32 6" Target 22LR
- Thread starter meh92
- Start date
Register to hide this ad
Looks like a pre-Model 35.
Mine, #24266 shipped in November 1956. You would be spoiling the kids as this cool revolver is quite valuable, maybe $1000?
My favorite gopher getter.
Mine, #24266 shipped in November 1956. You would be spoiling the kids as this cool revolver is quite valuable, maybe $1000?
My favorite gopher getter.
That's a nice shooter and everything does look correct. A Model of 1953 .22/32 Target built on the New I frame, a post 1955 3 screw. It was designated the Model 35 in June 1957 and became the Model 35-1 in Oct 1961 when introduced on the J frame.
What is the price on it?
They're a bit scarce compared to the 4" 22/32 Kit Gun and therefore priced higher. That one looks just under collectible condition so I believe $1000 is too high.
A Kit Gun is easier for my grandkids to shoot well because of its 4" barrel, and they are cheaper to obtain.
What is the price on it?
They're a bit scarce compared to the 4" 22/32 Kit Gun and therefore priced higher. That one looks just under collectible condition so I believe $1000 is too high.
A Kit Gun is easier for my grandkids to shoot well because of its 4" barrel, and they are cheaper to obtain.
Last edited:
I do not spot anything not original. It is only missing one thing--your kid's hand wrapped around its grip. A gun's value is the best deal you find while shopping. The price will be forgotten. Good times with your kids will be remembered.
Couldn't have said it better. I seldom make a decision on a gun based on price. Of course if I can't afford it, I don't even look at it any further.
But if it's a decent example, right model, no abuse, etc., and not a rip off price, I either want it or don't. Old guns are where you find them. You can't leave one on the table and expect to just go find another like it.
But if it's a decent example, right model, no abuse, etc., and not a rip off price, I either want it or don't. Old guns are where you find them. You can't leave one on the table and expect to just go find another like it.
I was shooting my pre-35 yesterday while grilling salmon on the back deck.I love the balance and it will shoot where you point it.Hop on it before it gets away, not a lot of them around.
Mark
Mark
Mark,
I don't know what makes me more envious, grilling salmon or shooting off the back deck, I think maybe both at the same time!
I don't know what makes me more envious, grilling salmon or shooting off the back deck, I think maybe both at the same time!
Jim don't be too jealous all we can get in Arkansas is frozen salmon fillets but still pretty tasty if you are not used to fresh;-)
Mark
Green Frog
Member
I'm with Brother Hondo on this one... both pastimes sound great to me. I'll bring the ammo and dill tartar sauce lcf!
I haven't seen anything more from the OP on his potential purchase... I hope for the kids' sake he got it. I would caution any new owner of pre-War revolvers to check the tiny opposed wind age screws for tightness - you DON'T want to lose one!
Froggie
You got any more room on that deck? I can bring some smoked salmon along. (My son lives in WA, and sends us smoked Copper River salmon a couple times a year). And, I'll bring my 22/32 Bekeart to try, or a couple more J Frame 22.s.` I'd love to be able to shoot off my back deck.
Good morning everyone and then you for the information. I wanted to hear back from the forum before making the deal. I am trading for it, not purchasing it outright.
The finish on the 22/32 is a bit worn and speckled, but the metal is not pitted. The owner has been very up-front about that. It is not in "collectible" condition. However, the bore, chambers, and action are all good. I'm picking it up as a "shooter" so finish wear doesn't bother me at all.
I'll post pics later tonight.
Thanks again everyone!
The finish on the 22/32 is a bit worn and speckled, but the metal is not pitted. The owner has been very up-front about that. It is not in "collectible" condition. However, the bore, chambers, and action are all good. I'm picking it up as a "shooter" so finish wear doesn't bother me at all.
I'll post pics later tonight.
Thanks again everyone!
Green Frog
Member
Wow, Mark. It looks like you're throwing a party whether you planned to or not! 
A little background on my 22 HFT... I found it a couple of years ago at a gun show in Roanoke, VA. It had a bulged barrel (right over the locking lug) so I got a pretty good deal on it. Larry Poppert had a NOS barrel, made in the pre-War style, but without the notch underneath for the LERK. Friend Hondo44 was able to find me a spare ejector rod with the mushroom head that could be turned down sufficiently to clear the barrel which I was hesitant to modify. Mine came with the Regulation Police type grips which aesthetically I prefer to the two-screw target type. It's a lot of fun to shoot, but I find that my 1949 vintage K-22 seems to get more play these days. Maybe some grilled salmon is what I need to inspire me to return to the HFT!
Froggie
PS I just found a couple more boxes (325 rd each) of Federal Auto Match ammo... I'll bring them to the party.
A little background on my 22 HFT... I found it a couple of years ago at a gun show in Roanoke, VA. It had a bulged barrel (right over the locking lug) so I got a pretty good deal on it. Larry Poppert had a NOS barrel, made in the pre-War style, but without the notch underneath for the LERK. Friend Hondo44 was able to find me a spare ejector rod with the mushroom head that could be turned down sufficiently to clear the barrel which I was hesitant to modify. Mine came with the Regulation Police type grips which aesthetically I prefer to the two-screw target type. It's a lot of fun to shoot, but I find that my 1949 vintage K-22 seems to get more play these days. Maybe some grilled salmon is what I need to inspire me to return to the HFT!
Froggie
PS I just found a couple more boxes (325 rd each) of Federal Auto Match ammo... I'll bring them to the party.
Good morning everyone and then you for the information. I wanted to hear back from the forum before making the deal. I am trading for it, not purchasing it outright.
The finish on the 22/32 is a bit worn and speckled, but the metal is not pitted. The owner has been very up-front about that. It is not in "collectible" condition. However, the bore, chambers, and action are all good. I'm picking it up as a "shooter" so finish wear doesn't bother me at all.
I'll post pics later tonight.
Thanks again everyone!
The finish on the 22/32 is a bit worn and speckled, but the metal is not pitted. The owner has been very up-front about that. It is not in "collectible" condition. However, the bore, chambers, and action are all good. I'm picking it up as a "shooter" so finish wear doesn't bother me at all.
I'll post pics later tonight.
Thanks again everyone!
Sure thing the more the merrier as long as everyone brings their own 22 bullets
Mark
Wow, Mark. It looks like you're throwing a party whether you planned to or not!
A little background on my 22 HFT... I found it a couple of years ago at a gun show in Roanoke, VA. It had a bulged barrel (right over the locking lug) so I got a pretty good deal on it. Larry Poppert had a NOS barrel, made in the pre-War style, but without the notch underneath for the LERK. Friend Hondo44 was able to find me a spare ejector rod with the mushroom head that could be turned down sufficiently to clear the barrel which I was hesitant to modify. Mine came with the Regulation Police type grips which aesthetically I prefer to the two-screw target type. It's a lot of fun to shoot, but I find that my 1949 vintage K-22 seems to get more play these days. Maybe some grilled salmon is what I need to inspire me to return to the HFT!
Froggie
PS I just found a couple more boxes (325 rd each) of Federal Auto Match ammo... I'll bring them to the party.
Ok then we are all set. Now if the weather will clear up.
Mark
Froggie, my HFT is similar, it had a very small bulge in the barrel, and I had gotten a "in the white" new barrel from Numrich, and I sent it all to David Chicoine. When he got it he called me and we discussed it, and he recommended rather than trying to fit the new barrel, engrave it, blue it, etc. we just sleeve the barrel. He did it so well you have difficulty knowing it was done. It shoots as new. The only problem I have with it is the stocks (2 screw target) are just too skinny to hang onto very well. It's just a shooter.
I picked it up earlier today. The first thing I did when I got home was detail strip it and do a full clean and lube. It was a little dirty and very dry. Overall I'm very pleased. The owner described the condition accurately. The finish is definitely worn but the action is smooth, and the bore and chambers are in excellent condition. The grips are also numbered to the gun, which is an added bonus.
I traded a 4" HB Model 10 in very nice condition and threw a $50 on top. I am very pleased with the deal and can't wait to go plinking with my son this weekend. He is really excited, but probably not as much as I am!
I traded a 4" HB Model 10 in very nice condition and threw a $50 on top. I am very pleased with the deal and can't wait to go plinking with my son this weekend. He is really excited, but probably not as much as I am!
Green Frog
Member
It looks better than the first pictures indicated! Yours is of course a post-War, coil spring gun, so it still has enough of the old to be cool, but also has the advantages of later technology and steels. This should be a great gun for you AND the kids! Congratulations.
Froggie
Froggie
