A Nice 64-5

OIF2

Member
Joined
Jan 1, 2006
Messages
1,752
Reaction score
3,727
Location
Back home, for now
Here's some "after" photos of my 64-5, which went to S&W for their express master action job. I sent a new SA/DA hammer (revolver was a DA only version purchased from J&G Sales) along with it, and requested no trigger stop. I was going to get the bead-blast too, but this one polished up quite nicely. I added a set of Rosewood magnas and a Tyler-T and I'm ready. A superb revolver, perfectly timed and tuned that shoots to POA...with no lock. I really like the RB K-frames. This one is an exceptional shooter and beats anything now produced. A great and inexpensive project gun.
Bob

DSC_1023.jpg

DSC_1024.jpg

DSC_1025.jpg
 
Register to hide this ad
Very nice, congrats! I agree, beats anything they make today.....for a fraction of the price!!

My J&G 64-5 has a trigger on par with my pre lock Performance Center revolvers. Enjoy yours! Regards 18DAI.
 
Bob, very nice. I am actually going to pick up my 64 NY-1 from JG Sales tonight. I think I will leave the DA only hammer on it. Did those magnas come on it? Not sure if mine will have magnas or pachmayrs.

Depending on the condition, I'll try to polish it up before I bead blast it.
 
Hi Aaron
I bought those stocks from a fellow forum member...VERY nice! I can't say enough good things about this revolver. It turned out exactly like I wanted. I have less than $450.00 into it, including purchase, the stocks, S&W action job and postage. In return I got a better-than-new, factory tuned revolver that shoots to POA at 25 yards with factory wadcutter. Doesn't get any better than that.
Bob

PS Aaron- If you're looking for an LAPD-issue revolver, I'm almost positive the 67s and 15s (DAO with Hogue monogrips) are LAPD turn-ins. Might be worth looking at.
 
Did you refinish those grips or have someone do them?
 
PS Aaron- If you're looking for an LAPD-issue revolver, I'm almost positive the 67s and 15s (DAO with Hogue monogrips) are LAPD turn-ins. Might be worth looking at.

Thanks. I called JG and asked them about the 15s and 67s, and they said none of them have any police markings. Since I already have a 15 and 67, if I got another, I'd want an LAPD marked one. Wouldn't that be cool... ;)
 
Nice gun, I also have a 64-5 from J&G that will be left as is but have had the master action package done on my 629, its as smooth as silk.
 
This is my 2nd S&W action job and I've had no reliability issues. It's not super-light, just smooth.
Bob
 
Bob,

What a neat project! I'd be proud to carry that one. The finish looks great - just the right amount of "frosting".

Thanks for the great pictures,

Jerry
 
OIF2,

You have some smoking revolvers. I notice we have many of the same guns and I always enjoy looking at your pictures. One of these days, I will get a new camera and post the Model 60 I have been carrying on duty as a BUG and off duty for the last 21 years. It looks every bit of it too! By the way, what is the story of your Colt Metropolitan? Keep those great pictures coming.
 
Some neat info I found on the NY-1 guns:

Collection Online - NYCPD - S&W Model 64 NY-1 RB 2 inch

This Smith & Wesson Model 64 NY-1 #BBY8719 was a direct shipment from Smith & Wesson to the New York City Police Department on February 17, 1989. It was part of a 200 gun shipment.
The Model 64 NY-1 revolver was a contract produced gun made exclusivel for the NYCPD. It's specific features were the Double Action Only (DAO) mechanism, special serial number placement and finish.
The Model 64 NY-1's were available from 1987 thru 1993, when they were replaced by the 9mm automatics.
The NYCPD stipulated that the new guns had to have the serial number in three places: the cylinder yoke cut-out, the left side of the frame and the traditional spot on the bottom of the butt. The serial numbers were applied in one of three manners, with the earliest contract guns having the serial numbers stamped in the traditional manner. Later gun had the serial numbers stamped with a 'dot matrix' sort of effect. Lastly, guns mainly towards the end of production had the serial numbers on the butt and yoke either 'dot matrix'ed or stamped, and the frame side serial number 'decal-ed' on.
Early guns had a polished steel look that rapidly gave way to a 'frosted' matte finish.
Early guns are also usually found with hammers that have freely floating firing pins rather than the later mounted spring loaded firing pins.
Naturally, there are overlaps within all these variations.
Model 64 NY-1's fall into 4 major categories:
Model 64-4 NY-1 2 inch Round Butt
Model 64-5 NY-1 3 inch Round Butt
Model 64-5 NY-1 4 inch Round Butt
Model 64-5 NY-1 4 inch Square Butt
Within these four categories, there are subtle variations, mainly based on the manner in which the serial number is applied and on the finish.
The 2 inch gun shown here is one of the less often encountered models. Intended as an off-duty or undercover gun, it's advantage of an extra shot (versus the Model 60 NY-1 or 640, it's authorized ordnance contemporaries) was offset by it's weight and size. However, when the Model 60's authorization was withdrawn, the Model 64-4 NY-1 was pretty much the only game left in town other than the Ruger SPNY.
One interesting note in regards to the Mdel 64-4 NY-1 is that S&W offered them, along with a $25 gift certificate, to officers who had bought the Model 60 NY-1 and returned them when they were no longer authorized.
The total number of known Model 64's of all flavors is 5,479 pieces. A statistical breakdown is as follows:
Model 64-4 NY-1 2 inch Round Butt - 453
Model 64-5 NY-1 3 inch Round Butt - 612
Model 64-5 NY-1 4 inch Round Butt - 932
Model 64-5 NY-1 4 inch Square Butt - 2,169
Additionally, there were 1,313 guns in the records with no notation as the barrel length and grip configuration.
 
I just bought a 64-3 and it needs a little polishing done to it. What did you use because yours looks great.

Thanks,
Jeremy
 
Hello, Photoman! You bet! (I've not been able to add anymore 4" HB round butt 64's but have a couple more with the more common square butt frames.)

Best to you and yours.
 
Back
Top