converting to DAO & reinstalling a semi-auto hammer

ecrawmer

Member
Joined
Jul 3, 2008
Messages
41
Reaction score
1
Location
Roswell, GA
Ok, here's what I'm trying to do. I bought an extra hammer for my second gen 469 and want to grind off the single action notch to make it DAO. I don't want to take out the wrong notch. Could an expert please direct me in the right direction? Here's the hammer. I'll number the notches from left to right; 1, 2, 3, & 4. Now which one to remove to make it DAO?
469hammer00000.jpg

Once I change the hammer, I've got to get it into the gun. Are there any tricks or helpful hints on putting everything back together?

Thanks ahead of time.
 
Register to hide this ad
Ok, here's what I'm trying to do. I bought an extra hammer for my second gen 469 and want to grind off the single action notch to make it DAO. I don't want to take out the wrong notch. Could an expert please direct me in the right direction? Here's the hammer. I'll number the notches from left to right; 1, 2, 3, & 4. Now which one to remove to make it DAO?
469hammer00000.jpg

Once I change the hammer, I've got to get it into the gun. Are there any tricks or helpful hints on putting everything back together?

Thanks ahead of time.
 
Back
Top