Good bore light

Zackary

Member
Joined
Nov 19, 2006
Messages
122
Reaction score
152
Looking to purchase a good quality bore light to use for both rifle and revolver inspections/purchases. Maxed out on online "reviews". Any suggestions would be greatly appreciated. Thank you.
 
Register to hide this ad
I use a Streamlight Stylus. Mine has had the same batteries for 5 years and not required replacement. They come with a lifetime warranty. I have heard that there is a rechargeable model available as well. IIRC, I paid less than $20 for mine.
 
I've been using the Remington bore light for years, inexpensive, works fine.
 
I use a piece of white paper.

Simply look down the bore and hold the paper at the other end to reflect light.

Everyone seems to be looking for a gadget or a gizmo to accomplish a simple task that's easily accomplished without modern technology.
 
+1 on the Streamlight Stylus. I've have a couple of them and they have been great.
 
I've used a thumbnail or piece of white paper in a pinch, but a good bore light is far superior.

This Lux-Pro with a 90 degree adaptor and an unmarked flexible bore light have served me for years, but they're now relegated to bench work. They're too big to haul around and they don't work with muzzle loaders.

attachment.php


My new bore light of choice is an LED bobber light, intended for night fishing. You push the tip down for on, pull it out for off. They're rated for 60 hours run time, cost about $2 when purchased in a multi-pack and are about the size of a stick match. They work great and fit nicely in an empty chapstick tube. I keep extras in my gun show kit bag, because people want one when they see it in action.

attachment.php


attachment.php
 

Attachments

  • A02DB21D-102A-440D-8E4A-F94551A8014C.jpg
    A02DB21D-102A-440D-8E4A-F94551A8014C.jpg
    45.4 KB · Views: 80
  • E6CBFA4F-B9E3-4820-A270-460415F34A65.jpg
    E6CBFA4F-B9E3-4820-A270-460415F34A65.jpg
    38.2 KB · Views: 83
  • FB572799-59E4-4B8F-9CCB-FA5B57AEABA5.jpg
    FB572799-59E4-4B8F-9CCB-FA5B57AEABA5.jpg
    28 KB · Views: 83
Last edited:
I use a piece of white paper.

Simply look down the bore and hold the paper at the other end to reflect light.

Everyone seems to be looking for a gadget or a gizmo to accomplish a simple task that's easily accomplished without modern technology.

I'm not even that sophisticated! I use my thumbnail to reflect overhead lighting into the barrel. I always have it with me unless I've mashed it with a hammer . . . again.
 
Last edited:
I just use an inexpensive flexible shaft bore light these days, however there WAS a day when I used just my thumbnail UNTIL one day trying to use this method to check out the bore on a M1 Garand!

I learned real quick way...way...back when that the original version of "Garand thumb" referred to loading a en-bloc clip, and that version is well known nowadays to all as Garand Thumb version 1.0........Garand Thumb version 2.0 comes by wiggling your dang thumb around while trying to check the bore!

Cheap bore light beats heck out of having to hold your Laphroaig Single Malt only in your right hand cause your left hurts too much!
 
I have one with the flexible stem like s&wchad shows above. I like it much better than the ones that have an L shaped clear plastic tip and use a couple of AA batteries, the longer, flexible tip is usable in many more types of firearms.

One thing I can mention is there is such a thing as too much light. I have one of the penlight with L shaped clear plastic tip bore lights and found that my pupil closes down from the brightness and it makes it harder to examine the bore. I ended up taking some sandpaper to both flat ends of the clear plastic tip to cut back some of the brightness but it still isn't optimal. That one is now relegated to home use and the other one is in my gun show backpack.
 
Back
Top