K38 favorite load?
- Thread starter carexpert
- Start date
D). I'll be stocking up on .38 brass right away!
Register to hide this ad
11e40
Member
3.0 gr. bullseye 148 hbwc. 4.5 unique 158 lswc hp.
ChuckS1
US Veteran
3.6 grains of Bullseye and the RCBS 38-150.
Skip Sackett
US Veteran
My standard load of 3.5gr of Bullseye with any 158-160gr LSWC, especially the one I cast myself, an H&G #290BB.
The other load I like a lot for it is 3.0gr AA#2 with a148gr DEWC, again, one I cast from an H&G #50 mould.
Either one is super accurate.
The other load I like a lot for it is 3.0gr AA#2 with a148gr DEWC, again, one I cast from an H&G #50 mould.
Either one is super accurate.
TSQUARED
Member
2.7 gr. Bullseye Rem 1 1/2 behind Remington 148 gr. LHBWC or 3.6 gr. Trail Boss behind a 158 gr. LRN.
mkk41
US Veteran
Got two favorites. A hard cast 148gr DEWC over 4.0grs of HP-38/W-231 or a hard cast 158gr SWC over 5.0grs HP-38/W-231.
bill skebeck
US Veteran
158 G R.N. FROM M.B.C. 3g BULLSEYE I USE THE SAME LOAD 5 DIFFERENT S.W. 38 SPECIAL PISTOLS. BILL
FOR REVOLVER DISTINGUISHED BULLLSEYE. 3.1 WST , ZERO 158SWC SWAGED
FOR PURE ACCURACY 2.7 WST, ZERO OR REMINGTON 148 GR HBWC SWAGED
JIM P
FOR PURE ACCURACY 2.7 WST, ZERO OR REMINGTON 148 GR HBWC SWAGED
JIM P
Dale53
Member
When using 148gr HBWC - 2.7-3.0 grs of Bullseye.
When using 148 gr Double Ended Wadcutters, use 3.0-3.5 grs of Bullseye. I shoot the H&G #251 dbl ended W/C seated with the first band out (taper crimped on the trailing edge of the first band) with 3.5 grs of Bullseye. This will shoot well under 1" at 25 yards using .38 Special cases in my Model 14, my 686's (4" and 6") and my 4" Model 520.
Dale53
When using 148 gr Double Ended Wadcutters, use 3.0-3.5 grs of Bullseye. I shoot the H&G #251 dbl ended W/C seated with the first band out (taper crimped on the trailing edge of the first band) with 3.5 grs of Bullseye. This will shoot well under 1" at 25 yards using .38 Special cases in my Model 14, my 686's (4" and 6") and my 4" Model 520.
Dale53
BUFF
SWCA Member, Absent Comrade
Either Speer or Remington's 148 grain HBWC over 2.8 grains Bullseye. I try to use either Federal or Remington small pistol primers but sometimes have to use whatever I can find.
SWC bullets can often shoot pretty much just as well as wadcutters, assuming equal quality of production, but that's one of the nice things about handloading for revovlers, bullet style doesn't affect function.
SWC bullets can often shoot pretty much just as well as wadcutters, assuming equal quality of production, but that's one of the nice things about handloading for revovlers, bullet style doesn't affect function.
ChuckS1
US Veteran
Well, to add to my first post, don't forget the 358311 158 grain LRN. I use this with 3.6 grains of Bullseye too.
Why use the Kleenex? For filler?
I normally shoot 148's with 2.3 gr of B.E. (approx. 4300/yr for PPC league, practices and matches), no problems ever.
+1 with post #5........................but
my snub and 6" like 4.0grs of TB for a factory Dup. loading with the 158 lead.
my snub and 6" like 4.0grs of TB for a factory Dup. loading with the 158 lead.
Moe Mentum
Member
I use 3.0 grains of Red Dot under a 158 grain Xtreme plated bullet, or a hard cast bullet. Sometimes I use 3.7 grains of W231 with the same bullets. Mild loads, easy to shoot, and pretty accurate.
Similar threads
- Locked
