M&P-15 22 Accessories

ive heard of those before, read about them on other sites, people seem to like them. I got my Barska 3-9x42 compact scope with rings for 79.99 to my door, awesome deal/awesome scope.
 
TxShooter2k9 said:
ive heard of those before, read about them on other sites, people seem to like them. I got my Barska 3-9x42 compact scope with rings for 79.99 to my door, awesome deal/awesome scope.
Click to expand...

Barska seems to have a decent reputation. A 3-9X is pretty hard to beat at the range. The more I look at the mid and lower priced optics, it seems like I keep seeing the same product with just a different decal on it. BSA, UTG, Leapers, Barska, Sightmark... on and on.

I've added some more items.... green laser is next.
 

Attachments

  • DSC01507.jpg
    DSC01507.jpg
    81.1 KB · Views: 4,322
If you find a nice green laser, be sure to let me know about it, i would like one, i have a Viridian Green laser on my pistol, and love it.
 
ChattanoogaPhil said:
Barska seems to have a decent reputation. A 3-9X is pretty hard to beat at the range. The more I look at the mid and lower priced optics, it seems like I keep seeing the same product with just a different decal on it. BSA, UTG, Leapers, Barska, Sightmark... on and on.

I've added some more items.... green laser is next.
Click to expand...

Looks awesome!!! Well done.
 
TxShooter2k9 said:
If you find a nice green laser, be sure to let me know about it, i would like one, i have a Viridian Green laser on my pistol, and love it.
Click to expand...

I'm considering a green laser from Primary Arms. Below is a link to a discussion about it.

I am also looking at a VTAC offset mount that hugs closer to the rail than other mounts I have seen. Since the Primary Arms laser is rather large, 1 x 4 5/8, I would want it mounted as close as possible to the rail. At $69, it's priced right for entertainment purposes,

Also, the Laserlyte K-15 looks like a great performer. Though it has a double wide body, the way it mounts keeps it from hanging far from the rail as regular tube style lasers tend to do. It's pricey to mount on a .22... I might have to buy it for my Bushmaster and then lend it to the 15-22 (grin).


Primary Arms Green laser (IN STOCK) - AR15.COM
 
i havent seen that k15 laser before, i like it, but never really been a fan of the power cable, guess im used to my Viridian laser with the on/off switch right on the laser housing. But i may look into the k15 sometime.
 
TxShooter2k9 said:
i havent seen that k15 laser before, i like it, but never really been a fan of the power cable, guess im used to my Viridian laser with the on/off switch right on the laser housing. But i may look into the k15 sometime.
Click to expand...

I think the K-15 only requires the cable when the switch is in the "momentary" position.
 
Speaking of Laserlyte... they make a subcompact laser- FSL. It really is miniture-- about the size and dimension of the base portion of the 15-22 sight. The FSL lens appears to sit low enough on the rail that I'm thinking it could be mounted 'behind' the front sight, and that the beam would go through the hole in the sight base. It would be very stealth compared to the monster lasers I've been looking at. Though, the FSL would probably be of little use other than for my dog to chase around the living room.

There's a Eastman Gun Show gun show in Dalton, GA next week. Hopefully I will be able to eyeball some of the products I'm considering.
 
yeah, i love my green laser, its real easy to see in the daytime, makes target shooting pretty fun to me. Especially wiht my pistol. Cause im not good at all with the regular sights on it. But with the laser im pretty dead on the bullseye with it.
 
ChattanoogaPhil said:
Actually, I do have a holographic sight. There's a pic of it on my rifle in the "Pictures" thread. It's a Sightmark reflex. Out of the box it is a perfect co-witness with the factory S&W sights.
Click to expand...

Phil,

I could not find your picture posting (there are a bunch of picture threads...). Can you tell me the model number of the Sightmark? I am interested in models that will co-witness with the factory sights, Sightmark or others.

Thanks!
 
Col. Plink said:
Phil,

I could not find your picture posting (there are a bunch of picture threads...). Can you tell me the model number of the Sightmark? I am interested in models that will co-witness with the factory sights, Sightmark or others.

Thanks!
Click to expand...

Sightmark SM13003B. Sitting on the rail with no riser, it will put the dot right on top of the front sight.

The good:

Once set, holds zero. Holds zero when switching among the 4 rectiles. Holds zero after mounting and dismounting.

Small (2MOA I think) red dot allows for 50 yards and beyond target shooting without covering up the bullseye. Most of the inexpensive red dots I have seen are the much larger 5MOA dots. So if you're looking for something smaller than 5MOA, the Sightmark might be of interest.

Not so good:

Rectile fades more in direct sunlight than the tube-type red dots, especially if the Sun is from behind. Most of my shooting is at covered stations so the Sun doesn't matter. But If you are going to be shooting in the open during bright daylight, then the Sightmark holographic might not be as good as other red dot setups.

Price: I have seen as low as $40 and as high as $80.
 
Guys,

Thanks for the details, and the lead on CTD... I'm looking at vertical foregrips also.
 
Here is the flash hider that I got for my 15-22 after seeing it on a You Tube video it is made for the 10-22 but fits the 15-22 it just slides on and has a set screw on the bottom in the video it looked very good I cant speak first hand on it as my S&W is back at Smith to fix the blown up extractor however I did order and receive the flash hider and it looks well made. Here is the link to ebay where I purchased it.

RUGER 10-22 BLUE MUZZLE BRAKE SHORT STYLE - *BEST BUY! - eBay (item 200397908351 end time Nov-22-09 17:45:17 PST)
 

Attachments

  • 158.jpg
    158.jpg
    37.1 KB · Views: 411
Can you measure the inside diameter? I'd like to know approximately how close it is to fitting well on the 15-22 barrel.

Thanks!
 
Just picked mine on Saturday. Put about 300 rounds of walmart federal bulk pack through it. Not one hickup.

Being a southpaw shooter, the first accessory I've added is a Norgon ambi-catch that I had sitting around for another lower. Fits and functions perfectly.
mp15-22-6.jpg

I'm hoping to find a solution for a ambi safety selector. I don't really want to just swap the standard selector around. I'm tempted to try and modify an existing selector using the parts from a standard ambi selector. But I'm reluctant to pull out the file and drill until I know I can get a replacement if needed.

I have a couple of trigger sets that I could throw in it (standard stag single stage and a RRA NM 2 stage), but I'll probably hold out for a better setup like a AR Gold or Giselle SSA.

Other accessories on order are Magpul MBUS (front and rear), CTR stock, MIAD grip (with AR10 gapper), Larue FUG, and eventually a Eotech XPS2.0.
 
Col. Plink said:
Guys,

I'm looking at vertical foregrips also.
Click to expand...

I chose the Mako because of the shape. Not only does in fit my hand well, but the way it is cut, when folded up, it does not get in the way for a full grip on the rail. And because my hand is positioned between the rail and grip, I can just simply push down and and the grip will lock into position. It requires a push button to fold up. It's also designed with what Mako describes as a "safety extension" which is a good feature if mounted close to the muzzle... like on a pistol or bullpup rifle.
 
MrHowell said:
Here is the flash hider that I got for my 15-22 after seeing it on a You Tube video it is made for the 10-22 but fits the 15-22 it just slides on and has a set screw on the bottom in the video it looked very good I cant speak first hand on it as my S&W is back at Smith to fix the blown up extractor however I did order and receive the flash hider and it looks well made. Here is the link to ebay where I purchased it.

RUGER 10-22 BLUE MUZZLE BRAKE SHORT STYLE - *BEST BUY! - eBay (item 200397908351 end time Nov-22-09 17:45:17 PST)
Click to expand...

Does this require any alteration to fit on the 15-22? I saw a post earlier where someone said they had to use the dremel to get it to fit.
 
Thomas_H said:
Just picked mine on Saturday. Put about 300 rounds of walmart federal bulk pack through it. Not one hickup.

Other accessories on order are Magpul MBUS (front and rear), CTR stock, MIAD grip (with AR10 gapper), Larue FUG, and eventually a Eotech XPS2.0.
Click to expand...

:D

CTR, MBUS, Eotech, TD vertical grip, etc.

4080460421_964f437c97.jpg
 
My S&W M&P 15-22, Modified a little.

Before someone says, "He put a $1100 sight on his 15-22".
No...I put a $479 Rifle on my $1100 sight! :D It shoots everything within a nickel size hole at 50 yards. Have not tired 100 yards yet.

-Geissele DMR Trigger
-Trijicon Acog TA31H
-LaRue Tactical RCO Acog mount
-CAA grip
-JP anti walk trigger pins
-Magpul MBUS backup sights
-Wilson Combat Accu-Tac Flash Hider
-CAA Pivoting Bipod Grip
-Barrel Threading

Suppressor already paid for just waiting on stamp.

GeisseleandSW15-227.jpg


GeisseleandSW15-226.jpg


GeisseleandSW15-225.jpg


GeisseleandSW15-224.jpg


Acog.jpg
 
Last edited:
Awesome !!!!

I really love it. ;)

I really like the Wilson Combat Accu flash hinder, great looking indeed. Where do you have your barrel Threaded? :)
 
Last edited:
In virginia beach. He did it in about 2 days. If you need his info let me know.
 
Last edited:
I'm looking around for some place locally, actually, Va beach is not that far from me, btw. ;)

I really like your set up. The rifle looks very.. very.. aggressive. :D
 
PanamaLee said:
Before someone says, "He put a $1100 sight on his 15-22".
No...I put a $479 Rifle on my $1100 sight! :D It shoots everything within a nickel size hole at 50 yards. Have not tired 100 yards yet.

-Geissele DMR Trigger
-Trijicon Acog TA31H
-LaRue Tactical RCO Acog mount
-CAA grip
-JP anti walk trigger pins
-Magpul MBUS backup sights
-Wilson Combat Accu-Tac Flash Hider
-CAA Pivoting Bipod Grip
-Barrel Threading

Suppressor already paid for just waiting on stamp.

GeisseleandSW15-227.jpg


GeisseleandSW15-226.jpg


GeisseleandSW15-225.jpg


GeisseleandSW15-224.jpg


Acog.jpg
Click to expand...

Looking good. :D

Acog FTW

Which suppressor did you go with?
 
PanamaLee said:
Before someone says, "He put a $1100 sight on his 15-22".
No...I put a $479 Rifle on my $1100 sight! :D It shoots everything within a nickel size hole at 50 yards. Have not tired 100 yards yet.
Click to expand...

Nice looking rifle.

The thru-scope pictures is FOV at 50 yards?
 
You must log in or register to reply here.

Similar threads

H
Why I chose the 15-22 over the 522
2 3
Replies
60
Views
15K
Gopher Slayer
Gopher Slayer
TangoFoxtrot
For Newbe to the AR Platform Who Are Considering Buying The S&W M&P Sport
2
Replies
31
Views
12K
RainDodger
RainDodger
davnic66
  • Poll Poll
S&W M&P 15-22 M4 / CAR Conversion
2 3
Replies
60
Views
39K
rickyblaze
R
C
My plans with some questions, need some advice.
Replies
28
Views
5K
Jorsche
J
D
S & W M&P 15-22: Talk me out of it!
2
Replies
42
Views
11K
mud king
M

Latest posts

Back
Top