M&P15 picture thread

[pdude]

I found a single point sling adapter that kinda opens up and bolts around the tube. No need for tube removal. I can't remember where I got it right now but I was searching the Internet and found it.

Very cool. Will have to check that out too.

 

[SmokinDjinn]

My M&P 15 OR - 5.56 NATO

Troy folding battle sights (front and rear)

Troy single point sling and mount

Troy 30rnd magazines - 3

Magpul angled fore-grip

Magpul 30rnd PMAG - 4

UTG LED flashlight

Sight Mark Ultra Shot reflex sight

Waiting for a new mount for the light to arrive. Want to replace the gas block and handguard. Maybe add a laser a little later.

 

[2K05GT]

I Just picked up a Smith & Wesson M&P 15 Limited Edition Patriot Series
"Don't Tread on Me" Rifle. It's an Optics Ready without sights.

The Logo is etched into the receiver.

It's a real nice rifle, I really love the logo ...

 

[docav]

Here is a picture of my 15-22 and AR15ORC. The 15-22 has been FDE'ed, Magpul flip up's, ladder rail covers and Plinker Tactical charging handle. The AR15 ORC has a had a mil-spec buffer installed, Magpul butt stock, EoTech EXPS3 with a G33 magnifier, Diamondback aluminum drop in hand guard, Magpul grip and ladder rail covers. Also filled in all the lettering.

 

[Shipyard Dog]

My Sport

After all these add-ons, this thing is heavy. It went fr barebones 6.5 lbs to 8 lbs without any loaded mags. I was just in a hurry to do some upgrades and tacked on some cheap stuff. I am building a lower with a 22 upper for my son so most of all these ugrades will be moving to the other one. I suggest save your $$$, pick the light furniture and take your time in dressing up your sport. Sorry for the crappy phone picture.

Be safe and have fun.

Shipyard Dog out.

 

[BillyJack2012]

After all these add-ons, this thing is heavy. It went fr barebones 6.5 lbs to 8 lbs without any loaded mags. I was just in a hurry to do some upgrades and tacked on some cheap stuff. I am building a lower with a 22 upper for my son so most of all these ugrades will be moving to the other one. I suggest save your $$$, pick the light furniture and take your time in dressing up your sport. Sorry for the crappy phone picture.

Be safe and have fun.

Shipyard Dog out.

Don't worry. No matter how many times you say it or read it, everyone learns the hard way and ends up with a drawer full of bolt ons.

 

[Dutchs]

Seems like the right place to put my M&P 15

 

[Shipyard Dog]

I like "old school" too:

Noah

I like old school too. I might put the original, plastic handguard - after I camo it out. I just didn't like the added weight of the quad rail...and the bullet button. ;-)

 

[Shipyard Dog]

Back to Stock

After all these add-ons, this thing is heavy. It went fr barebones 6.5 lbs to 8 lbs without any loaded mags. I was just in a hurry to do some upgrades and tacked on some cheap stuff. I am building a lower with a 22 upper for my son so most of all these ugrades will be moving to the other one. I suggest save your $$$, pick the light furniture and take your time in dressing up your sport. Sorry for the crappy phone picture.

Be safe and have fun.

Edited...the latest, basic as is

 

[Bedouin2W]

New stock and pistol grip

Edited to add-
Its shoots okay 25 rds of PMC Bronze at an Allen Sight In target

 

[jesler1]

What kind of flash hider is that? Sweet looking rifle.

 

[Bedouin2W]

What kind of flash hider is that? Sweet looking rifle.

Thanks, I appreciate it.

The flash hider is just the stock flash hider that comes on the MOE version.

 

[Kadonny]

I finally got a picture of my completed Sport.

M&P15 Sport
Primary Arms Micro Dot with riser
Knights Armament RAS quad rail
Knights Armament VFG
Streamlight Polytac light
BAD lever
BCM Mod 4 charging handle

 

[Mwilson914]

I've done a few minor upgrades to my gun personally and this past weekend for my birthday I added a night vision scope to my M&P 15.

 

[ASTMedic]

Got my Sport set up over the past few weeks

(NO COMMENTS FROM THE PEANUT GALLERY ABOUT MY DIRTY BENCH!!!!

MOE carbine hand guard

MOE light kit

MIAD grip

Surefire M951 I took off another gun (think I may just put a TLR-1 on as the Surefire is too bulky)

Primary Arms red dot (not a bad red dot!)

Still need:

VTAC MK2 sling

Mount-n-Slot hand stop

LOTS more ammo so I don't have to shoot my stockpile.

 

[JaPes]

It's been a while.

It's been a while since I've poked around this forum. I've sold off my 15-22 and my M&P 9fs pistol is on consignment sale. The one and only S&W I have left is my 15-Sport. I've been tempted to sell it, but the Thompson Center 1:8 5R progressive gain twist Melonite treated heavy barrel is too darn good to let go.

It's been through some different changes. I've had carbine length drop in quad rails on it, Magpul furniture, bi-pod, flashlights, vertical grips, magpul sights, primary arms dot & magnifier, lightened trigger springs, polished combat triggers, etc... At one point it had every tacticool doo-dad on it and it became a pig of an AR.

I last settled on a basic setup to keep the 15-Sport lightweight. The original narrow diameter, no heat shield, handguard was back on. Most of the tacticool doo-dads came off.

I liked the return to a lightweight rifle. I prefer to shoot iron sights. What I didn't like was the lack of a heat shield on the handguard and the limited top rail space. With a Troy rear folding sight deployed, there was not enough rail space to mount a dot I had laying around. I got tired of the A2 front sight in the sight picture for those times I used a dot. I reconfigured the 15-Sport again.

• Troy folding front battlesight
• Troy folding rear battlesight
• Troy 15" Alpha Rail
• Troy Squid Grip rail inserts
• YHM low profile gas block
• Magpul MIAD grip with three emergency round grip insert.
• Magpul MOE stock
• Magpul MOE extended butt pad
• Magpul B.A.D. lever
• AR-Restor Hydraulic Buffer
• RRA 2-Stage Varmint Trigger
• BCM charging handle

The Troy Alpha rail has a small diameter which gives me a similar feel to the circumference of the stock 15-Sport handguards that I like. I have a longer iron sight radius. I'm going to change out the Bushnell Trophy "T" Dot for something smaller. The size and weight of it is annoying me to no end. I also prefer a simple 2-point sling set up. With the A2 front sight base gone, I'll have to figure out a new sling set up.

My 15-Sport is close to being done.

 

[naturally aspirated]

 

[eludethis]

Is that a real Magpul lower? If so, wanna sell it? Lol

 

[naturally aspirated]

Is that a real Magpul lower? If so, wanna sell it? Lol

Yes. No.

 

[eludethis]

Yes. No.

Can't blame me for trying

 

[SETEC ASTRONOMY]

I was trying something new.
This is my M&P 15 MOE with A-TACS FG Gunskin camo applied.

It matches Proppers' BDU coat and pants in this camo pattern rather nicely.

 

[NCGlockin]

Sport with Magpul upgrades.






_________________
I would rather have it and not need it than to need it and not have it.

 

[zerobarrier]

Hello,

I am new to the forum, so here is mine:

Him and his little brother the 15-22:

 

[cajunfirehawk]

My MP15T

With its lil brother (mod 411)

And in its current config w/Uber stock and with its DTI sister,
not shown is its Aimpoint Pro w/Fde cover.

​

 

[pburnster]

This is my rifle

 

[jtbayridge]

Newb saying hello

Been an owner of M&P15T for 3 years now and just found this forum. Here she is and her little buddy.

 

[millisec]

Ok not exactly Smith but it does hang with Smith Recent face lift for my Olympic ML-1. Clean & simple but still weighs in at 8 pounds w/o bling or a mag. The broach cut stainless 16" heavy match barrel is a pile driver and bull up to the gas block. Oly got a Magpul CTR, Spikes milspec tube, spring and ST-2 buffer, ambi sling hook, large BCM Gunfighter, Sadlak LP LN gas block, Troy 13" Alpha rail, DPMS Miculek brake, EOTECH EXPS2-0 and all new 30 and 40rd Magpul gen 3's. It may also see a 1-4 or 1-6 scope and maybe some irons. Lower was pretty much good to go with existing single stage match trigger and Hogue grip. Not exceptional but pretty much as good as single stage gets. It did get a Magpul enhanced trigger guard. There's also a Magpul MS3 for use when the Troy Alpha swivel shows up. Still on the fence about using a BAD lever. This gang of two is being joined by a Versa Max Tactical when it shows in a week or so. Just decided to keep my 11-87 pristine and keep killing birds with it.

Always loved this gun but it has two quirks. 1) Its chambered 223 min saami spec 2) The barrel is 1:10 so 63g is about as heavy a load for it. Will eventually build something with a 18" wylde medium contour but not today. Also still loath to ream it out for 5.56.

 

[naturally aspirated]

Here's a few more pics of my AR. I'm pretty happy with it now. I might change out the trigger some day, after I get a chromed BCG.

 

[ASTMedic]

M&P15 picture thread

NA, how do you like that comp/hider? I know people say its the best out but I'm having a hard time bringing myself to spend the money when the A2 hider works really well.

I'll add this here too.

Sport with a CTR stock, Troy Delta rail out front, MIAD grip, VTAC sling, PA red dot, BCM Mod 3 CH. Just need to mount my Surefire light.

 

[naturally aspirated]

NA, how do you like that comp/hider? I know people say its the best out but I'm having a hard time bringing myself to spend the money when the A2 hider works really well.

I'll add this here too.

Sport with a CTR stock, Troy Delta rail out front, MIAD grip, VTAC sling, PA red dot, BCM Mod 3 CH. Just need to mount my Surefire light.

Everything you have heard/read about them is true... I too was hard pressed to spend that kind of money on a compensator, but I would buy it again if I had too.